Ready-to-drop-in parts put an ultra-smooth, clean breaking, professional quality trigger job in your 1911 Auto in only minutes. Fully prepared hammer and pre-ground, pre-polished sear, plus springs and fully-machined disconnector, will install into most models of 1911 Autos with little or no fitting required. Helps promote better trigger control and improved accuracy. Pro Match - features wire EDM’d hammer and sear that are double heat treated, then finish ground for outstanding durability - 3 1/2 lb. pull weight. Commander Match - Carry Defense Style! A professional 4 lb. trigger pull.
SPECS: Kit includes hammer, sear, sear spring, mainspring (hammer spring) and disconnector. Pro Match - Stainless Steel, Rc 50. Commander Match - Stainless, Machined tool steel hammer, polished sides, Rc 50.
Mer...
En profesjonell avtrekkervekt uten arbeidet
Klar-til-innsetting-deler gir en ultra-glatt, ren brytning, profesjonell kvalitet på avtrekkerjobben i din 1911 Auto på kun minutter. Fullt forberedt hammer og forhåndsslipet, forhåndspolert avtrekker, samt fjærer og fullstendig maskinert disconnector, kan installeres i de fleste modeller av 1911 Auto med lite eller ingen tilpasning nødvendig. Bidrar til bedre avtrekkerkontroll og forbedret nøyaktighet. Pro Match - har en wire EDM’d hammer og avtrekker som er dobbelt varmebehandlet, deretter ferdigslipet for enestående holdbarhet - 3 1/2 lb. avtrekkervekt. Commander Match - Carry Defense Style! En profesjonell 4 lb. avtrekkervekt.
SPECS: Settet inkluderer hammer, avtrekker, avtrekkerfjær, hovedfjær (hammerfjær) og disconnector. Pro Match - Rustfritt stål, Rc 50. Commander Match - Rustfritt, bearbeidet verktøystålhammer, polerte sider, Rc 50.
Mer...
Kundevurderinger for NOWLIN COMMANDER MATCH TRIGGER JOB
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4
Would buy again(31.08.2013)
Installed one in my Colt Gov. model last night . Install was easy .Just remember how the old parts came out and put the new ones in the same way . Now the trigger pull is right at 4 pounds and it breaks beautiful . Very happy .
More work than expected(20.05.2011)
The Pro trigger kit did what it claimed. It provided a safe, secure trigger that breaks at 31/2 lbs as advertised. However the trigger hook surfaces were quite rough and needed lots of stoning with a hard Arkansas stone to smooth it out.
This Knowlin kit does the job well(31.05.2011)
I replaced the hammer, sear, sear spring, diconnector, and main spring in my colt XSE. The colt had a 4 1/2 pound trigger pull, and after installation the trigger pull was clean, crisp, 3 1/4 pounds. I have fired about 12000 rounds since the installation and the trigger is still as good as it was upon installation.
well worth it(30.10.2011)
I bought the Nowlin Pro-Match trigger job for my Remington R1 1911. There were a couple of minor issues with the installation. I had to do a bit of filing on the sear to get the thumb safety to slide back in place. Also, The sear spring needed some minor adjustment to get the grip safety to function properly. This was the first 1911 pistol I'd taken apart. It's a bit surprising how small the parts are for a relatively large pistol. If you keep track of all the parts and watch the installation video on the Brownells website, there shouldn't be any problems. The bottom line for me is that the trigger pull on the my R1 is lighter and more consistent now.
The easest way to upgrade your 1911(22.11.2011)
I install this trigger job kit along with the 1911 AUTO ULTRALIGHT MATCH TRIGGER and it took my gun to a whole other level!!! Sweet, crisp and precise gun and really makes a difference at the range.
*** Be careful if you don't have a beaver tail on your 1911 because that will be something you will have to replace too ***
It's nice to buy American made products.(13.12.2011)
The first kit I received had a issue with the hammer. I contacted the company and the President contacted me back and shipped me a replacement which worked flawlessly. Great company/people to work with.
hammer/sear mis-match(06.05.2013)
installed in a caspian .45...hammer notch had only the center 1/3 in contact with full face sear. 1/3 of Rt and left hammer notch was missing. Hammer at full position would lock with sear due to rough interface and deap hammer notch.
Produktnr.: 654012111 NOWLIN COMMANDER MATCH TRIGGER JOB Produsentnr.: 203C Klar-til-innsetting-deler gir en ultra-glatt, ren brytning, profesjonell kvalitet på avtrekkerjobben i din 1911 Auto på kun minutter. Fullt forberedt hammer og forhåndsslipet, forhåndspolert avtrekker, samt fjærer og fullstendig maskinert disconnector, kan installeres i de fleste modeller av 1911 Auto med lite eller ingen tilpasning nødvendig. Bidrar til bedre avtrekkerkontroll og forbedret nøyaktighet. Pro Match - har en wire EDM’d hammer og avtrekker som er dobbelt varmebehandlet, deretter ferdigslipet for enestående holdbarhet - 3 1/2 lb. avtrekkervekt. Commander Match - Carry Defense Style! En profesjonell 4 lb. avtrekkervekt.
3599NOK0kr 3 599,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Made in USA
US eksport klassifisering: 0A501.c
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr.: 654012110 NOWLIN PRO MATCH TRIGGER JOB Produsentnr.: 203PRO085382301907 Klar-til-innsetting-deler gir en ultra-glatt, ren brytning, profesjonell kvalitet på avtrekkerjobben i din 1911 Auto på kun minutter. Fullt forberedt hammer og forhåndsslipet, forhåndspolert avtrekker, samt fjærer og fullstendig maskinert disconnector, kan installeres i de fleste modeller av 1911 Auto med lite eller ingen tilpasning nødvendig. Bidrar til bedre avtrekkerkontroll og forbedret nøyaktighet. Pro Match - har en wire EDM’d hammer og avtrekker som er dobbelt varmebehandlet, deretter ferdigslipet for enestående holdbarhet - 3 1/2 lb. avtrekkervekt. Commander Match - Carry Defense Style! En profesjonell 4 lb. avtrekkervekt.
3349NOK0kr 3 349,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Produktnr.: 654000062 NOWLIN SPEED DEMON II ACTION KIT-3LB PULL Produsentnr.: 203SD085382301921 Klar-til-innsetting-deler gir en ultra-glatt, ren brytning, profesjonell kvalitet på avtrekkerjobben i din 1911 Auto på kun minutter. Fullt forberedt hammer og forhåndsslipet, forhåndspolert avtrekker, samt fjærer og fullstendig maskinert disconnector, kan installeres i de fleste modeller av 1911 Auto med lite eller ingen tilpasning nødvendig. Bidrar til bedre avtrekkerkontroll og forbedret nøyaktighet. Pro Match - har en wire EDM’d hammer og avtrekker som er dobbelt varmebehandlet, deretter ferdigslipet for enestående holdbarhet - 3 1/2 lb. avtrekkervekt. Commander Match - Carry Defense Style! En profesjonell 4 lb. avtrekkervekt.
3799NOK0kr 3 799,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Ready-to-drop-in parts put an ultra-smooth, clean breaking, professional quality trigger job in your 1911 Auto in only minutes. Fully prepared hammer and pre-ground, pre-polished sear, plus springs and fully-machined disconnector, will install into most models of 1911 Autos with little or no fitting required. Helps promote better trigger control and improved accuracy. Pro Match - features wire EDM’d hammer and sear that are double heat treated, then finish ground for outstanding durability - 3 1/2 lb. pull weight. Commander Match - Carry Defense Style! A professional 4 lb. trigger pull.
SPECS: Kit includes hammer, sear, sear spring, mainspring (hammer spring) and disconnector. Pro Match - Stainless Steel, Rc 50. Commander Match - Stainless, Machined tool steel hammer, polished sides, Rc 50.
Mer...
En profesjonell avtrekkervekt uten arbeidet
Klar-til-innsetting-deler gir en ultra-glatt, ren brytning, profesjonell kvalitet på avtrekkerjobben i din 1911 Auto på kun minutter. Fullt forberedt hammer og forhåndsslipet, forhåndspolert avtrekker, samt fjærer og fullstendig maskinert disconnector, kan installeres i de fleste modeller av 1911 Auto med lite eller ingen tilpasning nødvendig. Bidrar til bedre avtrekkerkontroll og forbedret nøyaktighet. Pro Match - har en wire EDM’d hammer og avtrekker som er dobbelt varmebehandlet, deretter ferdigslipet for enestående holdbarhet - 3 1/2 lb. avtrekkervekt. Commander Match - Carry Defense Style! En profesjonell 4 lb. avtrekkervekt.
SPECS: Settet inkluderer hammer, avtrekker, avtrekkerfjær, hovedfjær (hammerfjær) og disconnector. Pro Match - Rustfritt stål, Rc 50. Commander Match - Rustfritt, bearbeidet verktøystålhammer, polerte sider, Rc 50.
Mer...
Kundevurderinger for NOWLIN COMMANDER MATCH TRIGGER JOB
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4
Would buy again(31.08.2013)
Installed one in my Colt Gov. model last night . Install was easy .Just remember how the old parts came out and put the new ones in the same way . Now the trigger pull is right at 4 pounds and it breaks beautiful . Very happy .
More work than expected(20.05.2011)
The Pro trigger kit did what it claimed. It provided a safe, secure trigger that breaks at 31/2 lbs as advertised. However the trigger hook surfaces were quite rough and needed lots of stoning with a hard Arkansas stone to smooth it out.
This Knowlin kit does the job well(31.05.2011)
I replaced the hammer, sear, sear spring, diconnector, and main spring in my colt XSE. The colt had a 4 1/2 pound trigger pull, and after installation the trigger pull was clean, crisp, 3 1/4 pounds. I have fired about 12000 rounds since the installation and the trigger is still as good as it was upon installation.
well worth it(30.10.2011)
I bought the Nowlin Pro-Match trigger job for my Remington R1 1911. There were a couple of minor issues with the installation. I had to do a bit of filing on the sear to get the thumb safety to slide back in place. Also, The sear spring needed some minor adjustment to get the grip safety to function properly. This was the first 1911 pistol I'd taken apart. It's a bit surprising how small the parts are for a relatively large pistol. If you keep track of all the parts and watch the installation video on the Brownells website, there shouldn't be any problems. The bottom line for me is that the trigger pull on the my R1 is lighter and more consistent now.
The easest way to upgrade your 1911(22.11.2011)
I install this trigger job kit along with the 1911 AUTO ULTRALIGHT MATCH TRIGGER and it took my gun to a whole other level!!! Sweet, crisp and precise gun and really makes a difference at the range.
*** Be careful if you don't have a beaver tail on your 1911 because that will be something you will have to replace too ***
It's nice to buy American made products.(13.12.2011)
The first kit I received had a issue with the hammer. I contacted the company and the President contacted me back and shipped me a replacement which worked flawlessly. Great company/people to work with.
hammer/sear mis-match(06.05.2013)
installed in a caspian .45...hammer notch had only the center 1/3 in contact with full face sear. 1/3 of Rt and left hammer notch was missing. Hammer at full position would lock with sear due to rough interface and deap hammer notch.