Din handlekurv er tom.

Handlekurv

37 17 00 00

Meld på nyhetsbrev

ED BROWN
1911 OVERSIZED MAGAZINE RELEASE

800732842004 087011150

Replacement Catches For Faster Magazine Changes

Extra-long, oversize release button features 40 lpi checkering for positive grip and increased length for faster, easier mag changes with little or no change in grip. Long wearing, heat-treated, pre-drilled, hardened magazine catch comes already tapped and ready-to-install. Does not include catch lock and spring.

SPECS: Available in Blue catch and button or Stainless Steel (SS). Button: 3⁄8" (9.5mm) O.D., 3⁄16" (4.7mm) thick, 4-40 thread.

Mer...

Erstatningsfangster for Raskere Magasinbytter

Ekstra lang, overdimensjonert utløserknapp med 40 lpi riller for positivt grep og økt lengde for raskere og enklere magasinbytter med liten eller ingen endring i grepet. Slitesterk, varmebehandlet, forhåndsboret, herdet magasinfangst kommer allerede tappet og klar til installasjon. Inkluderer ikke fangstlås og fjær.

SPECS: Tilgjengelig i Blå fangst og knapp eller Rustfritt Stål (SS). Knapp: 3⁄8" (9.5mm) O.D., 3⁄16" (4.7mm) tykk, 4-40 gjenge.

Mer...

Kundevurderinger for ED BROWN 1911 OVERSIZED MAGAZINE RELEASE, BLUED

Antall vurderinger: 11
Fra brownells.com: 11
Gjennomsnittsvurdering: 3,3

Bigger than it looks... (01.07.2009)

This is MUCH bigger than the stock release on a Taurus 1911, in both button diameter and depth. It was bigger than I expected, but looks very good. High quality.

A lot of work to install (24.07.2011)

Seems well made but final machine work wasn't done, it needed a lot of material taken off in order to function properly. I should of sent it back, but I didn't.

Works perfect........ (28.03.2012)

Works perfectly on my Ed Brown Executive Carry...so I ordered another for my Kobra. I like the look and the function.

Excellent product! (22.04.2012)

Purchased this part for my Ed Brown Executive Elite. Dropped right in with no fitting required. Looks awesome and works perfectly.

Excellent buy (21.04.2018)

Dropped right in to my ATI FX 1911 with no fitting required. Much easier now to release the magazine than with the stock release.

Machining should be better for the $$ (09.12.2009)

Maybe I received one that eluded QC.

The machining along the length of the body was very rough. There was a large, rough ridge sticking out around its circumference at the level of the slot that the tab on the lock sits in before installation.

The ridge had to be filed and smoothed before the release would even fit into the frame. Then, further smoothed to allow a mag to be inserted without having to press the release.

The length and diameter of the button are perfect for me, but I have weird hands (long fingers, relatively short thumb) and like thicker grips.

Once fitted, I really like the unit, its just that at this price point, the poor machining was disappointing.

Also Slipped Through QC (15.01.2011)

The part was not machined properly at all. Needed major fitting to allow magazine insertion into the gun.

Requires Fitting (03.08.2012)

I bought this knowing it would require some fitting and it certainly did! I used emory cloth to remove material on the rounded areas and a dremel to smooth the 'catch' part. I couldn't insert a magazine until I smoothed and reduced the area of the catch.

Once fit, it seems to work well. I really like the oversize button on my match gun (USPSA single stack).

Great Product (31.10.2013)

I build and work on a lot of competition guns in my shop & this is a very popular mag release. It is machined (not cast)from very hard steel. Ed leaves material on the tab that holds the magazine so it drops right in & functions perfectly on some frames, if magazine insertion is a little stiff you can shave a little material to change the feel. Because of this I know I can use it in any single stack frame. GREAT PRODUCT!

Gross negligence in QC......maybe (26.07.2014)

I bought this part for my Springfield Armory 1911 Loaded Target with the understanding that minor fitting might be needed and am ready and able to do do it. Even after reading the reviews that one reviewer wrote about rough edges and excessive fitting required. I thought he was just complaining about a little work. When I received the product, I was horrified to see that my button came without the 20lpi checkering on the face of the button. I immediately went to Ed Brown's website thinking maybe I got the wrong part and found out they don't even make one without the checkering. This is gross negligence in quality control. How do you expect me to buy a gun you build if you can't even get your parts right.

Awsome Mag Release (05.03.2015)

Very nice mag release, minimal time to install, button checkering is sharp and symetrical, little chance of your thumb slipping as it feels like it is glued to your thumb! Fit and finish are very good. A well spent 15min. to install. It even works well with my holster as there is no interference what so ever. I will be fitting my other 1911's with this mag release. I feel it was a good Purchase and am very happy with it.

Les 11 flere anmeldelser fra brownells.com

799 799 2 NOK

Produktnr.: 087011150
ED BROWN 1911 OVERSIZED MAGAZINE RELEASE, BLUED
Produsentnr.: 842 800732842004 Ekstra lang, overdimensjonert utløserknapp med 40 lpi riller for positivt grep og økt lengde for raskere og enklere magasinbytter med liten eller ingen endring i grepet. Slitesterk, varmebehandlet, forhåndsboret, herdet magasinfangst kommer allerede tappet og klar til installasjon. Inkluderer ikke fangstlås og fjær.

799 NOK 17 kr 799,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Finish: Blued Hand: Right Make: 1911 Modell: Government, Commander, Officers

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Ekstra lang og overdimensjonert utløserknapp med 40 lpi riller for bedre grep og raskere magasinbytter.
Slitesterk, varmebehandlet og forhåndsboret magasinfangst klar til installasjon, uten fangstlås og fjær.
Tilgjengelig i Blå fangst og knapp eller Rustfritt Stål (SS); knappens dimensjoner: 3⁄8" (9.5mm) O.D., 3⁄16" (4.7mm) tykk, 4-40 gjenge.

Attributes

Finish: Blued Hand: Right Make: 1911 Modell: Commander,Government,Officers Leveringsvekt: 0,009kg Fraktbredde: 83mm Fraktlengde: 146mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Produktnr.: 087011151
ED BROWN 1911 OVERSIZED MAGAZINE RELEASE, SS
Produsentnr.: 844 800732844008 Ekstra lang, overdimensjonert utløserknapp med 40 lpi riller for positivt grep og økt lengde for raskere og enklere magasinbytter med liten eller ingen endring i grepet. Slitesterk, varmebehandlet, forhåndsboret, herdet magasinfangst kommer allerede tappet og klar til installasjon. Inkluderer ikke fangstlås og fjær.

799 NOK 6 kr 799,00 *

Leveringstid ca. 14-21 dager.
6 stk. på lageret i USA

Spesifikasjoner: Finish: Stainless Steel Hand: Right Make: 1911 Modell: Government, Commander, Officers

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Oppgrader din 1911 med ED BROWN Oversized Magazine Release! Ekstra lang utløserknapp for raskere magasinbytter. Perfekt grep og enkel installasjon. 🚀🔧 Lær mer!

Replacement Catches For Faster Magazine Changes

SPECS: Available in Blue catch and button or Stainless Steel (SS). Button: 3⁄8" (9.5mm) O.D., 3⁄16" (4.7mm) thick, 4-40 thread.

Mer...

Erstatningsfangster for Raskere Magasinbytter

SPECS: Tilgjengelig i Blå fangst og knapp eller Rustfritt Stål (SS). Knapp: 3⁄8" (9.5mm) O.D., 3⁄16" (4.7mm) tykk, 4-40 gjenge.

Mer...

Kundevurderinger for ED BROWN 1911 OVERSIZED MAGAZINE RELEASE, BLUED

Antall vurderinger: 11
Fra brownells.com: 11
Gjennomsnittsvurdering: 3,3

Bigger than it looks... (01.07.2009)

This is MUCH bigger than the stock release on a Taurus 1911, in both button diameter and depth. It was bigger than I expected, but looks very good. High quality.

A lot of work to install (24.07.2011)

Seems well made but final machine work wasn't done, it needed a lot of material taken off in order to function properly. I should of sent it back, but I didn't.

Works perfect........ (28.03.2012)

Works perfectly on my Ed Brown Executive Carry...so I ordered another for my Kobra. I like the look and the function.

Excellent product! (22.04.2012)

Purchased this part for my Ed Brown Executive Elite. Dropped right in with no fitting required. Looks awesome and works perfectly.

Excellent buy (21.04.2018)

Dropped right in to my ATI FX 1911 with no fitting required. Much easier now to release the magazine than with the stock release.

Machining should be better for the $$ (09.12.2009)

Also Slipped Through QC (15.01.2011)

The part was not machined properly at all. Needed major fitting to allow magazine insertion into the gun.

Requires Fitting (03.08.2012)

Great Product (31.10.2013)

Gross negligence in QC......maybe (26.07.2014)

Awsome Mag Release (05.03.2015)

Les 11 flere anmeldelser fra brownells.com

Kunder kjøpte også
Alternativer

WILSON COMBAT SHOK-BUFFS® PAK
1911 SHOK-BUFFS®

WILSON COMBAT

På lager

kr 239,00 *

Rekylbuffere

3,9

Oppgrader din 1911 med EGW Beavertail Grip Safety i blånet karbonstål. Perfekt tilpassning for en klirrefri passform. Krever børsemakertilpasning. 🚀 Lær mer!

EGW BEAVERTAIL GRIP SAFETY - BLUE
1911 BEAVERTAIL GRIP SAFETY

EGW

Kommer til lager

kr 1 299,00 * kr 1 249,00 - kr 1 449,00*

Sikringer

WILSON COMBAT 1911 OVERSIZED MAGAZINE RELEASE, BLUED
1911 OVERSIZED MAGAZINE RELEASE

WILSON COMBAT

På lager

kr 999,00 * kr 999,00 - kr 1 049,00*

Magasinutløsere

4,7

ED BROWN DROP-IN MAXI-WELL, BL/CHAINLINK
1911 DROP-IN MAXI-WELL

ED BROWN

På lager

kr 1 649,00 * kr 1 649,00 - kr 1 749,00*

Hovedfjærhus

4,6

Logg inn

Glemt passord?
Registrere

CONNECT

NETTSTEDSKART

PRODUKTKATEGORIER

BESTILLING

KUNDE SERVICE

Velkommen!

Velkommen til Brownells.no, Norges ledende leverandør av våpenrelaterte produkter, våpendeler, børsemakerverktøy, ladeverktøy, ladeutstyr og ladekomponenter!

Vårt kundeløfte:

Uansett om du bare liker å skyte, har våpen som hobby, er børsemaker og reparerer våpen daglig eller bare eier et våpen er dette siden for deg! I over 75 år har skyttere, profesjonelle børsemakere, hobby utøvere, militæret, politiet og våpenreparatører kommet til Brownells for å finne produkter og deler av høy kvalitet. Hos oss finner du over 40 000 produkter inkludert unike våpendeler, tilbehør, børsemakerverktøy, ladeverktøy, ladeutstyr, komponenter, ammunisjon og andre produkter for å vedlikeholde, reparere eller oppgradere dine våpen.

Priser inkl. mva. pluss levering

Klassisk visning

Mobilvisning