Beavertail grip safety machined from solid barstock is left slightly oversized at critical points to allow the gunsmith to achieve a true custom fit. Beavertail is wider than the frame so it can be fit to the frame instead of the frame to the beavertail, and helps you ensure a snug, rattle-free fit. Overall length is longer at the bottom and the angle is a match to fill the gap between the mainspring housing and the safety. Radius is .245" to fit frames that are pre-cut to .250". Pin hole is finish reamed to .158" to further improve fit and function. Large contact pad ensures positive engagement when the hand grasps the gun. .220 Radius grip safeties are made to fit Springfield and Caspian frames.
Carbon steel, blued, or stainless steel, natural silver, both with a matte finish. Fits 1911 Auto Series 70 only. Gunsmith fitting required.
Mer...
Beavertail grepssikring maskinert fra massivt stangmateriale er etterlatt litt for stor ved kritiske punkter for å tillate børsemakeren å oppnå en ekte tilpasset passform. Beavertail er bredere enn rammen slik at den kan tilpasses til rammen i stedet for rammen til beavertailen, og hjelper deg med å sikre en tett, klirrefri passform. Total lengde er lengre nederst og vinkelen er tilpasset for å fylle gapet mellom hovedfjærhuset og sikkerheten. Radius er 0,245" for å passe til rammer som er forhåndskutt til 0,250". Pinnehullet er ferdig reamet til 0,158" for å ytterligere forbedre passform og funksjon. Stor kontaktflate sikrer positiv engasjement når hånden griper pistolen. .220 Radius grepssikringer er laget for å passe til Springfield og Caspian rammer.
Karbonstål, blånet, eller rustfritt stål, naturlig sølv, begge med matt finish. Passer kun til 1911 Auto Series 70. Krever tilpasning av børsemaker.
Mer...
Kundevurderinger for EGW BEAVERTAIL GRIP SAFETY - BLUE
Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 4
Perfect for SA 1911's(07.02.2017)
I'd been wanting to work on an SA 1911 that I'd originally bought as a project gun which I bought . When I'd finally gotten around to it, I started looking here. Luckily EGW makes one that fits to SA model frames. I took the advice of staff here and bought the right jig for a .220 radius and after filling and fitting, it works perfectly. Fitting is required, and while yes one could list that it's a "con" that it's necessary, anyone who works on 1911's knows no part is truly 'drop in'.
Fit to finish is nice, and the radius was perfect. I'll be looking at EGW parts if I'm looking at working on other SA 1911's.
Drop-In Fit in Springfield Range Officer(05.05.2013)
This product was purchased to replace the original, which was broken in an unsuccessful fitting attempt. The pistol is a Springfield Armory Range Officer, purchased new in early 2013.
This part is a drop-in fit for the gun. There was a tiny bit of resistance as it was slipped into the frame, but after cycling it a few times it is perfectly smooth. The safety functions perfectly and it has had no adverse effect on any other aspect of operation of the gun.
This part is a slightly darker color than the original (which is very dark gray), and is more black than blue, but I'm willing to accept the difference in exchange for the fit and function.
This continues my 100% successful streak when I buy EGW parts.
Great high quality(04.10.2015)
Got this for my SA Trophy Match in 4 days from my research and order. All I can say is Thank You Brownells for helping me learn and become a better arms fixer.
Worst beaver tail(21.07.2017)
This is the worst beaver tail I've seen doesn't fit and after hours of grinding and fileing it still dosent fit don't waste your money.
.220 Springfield(10.02.2013)
I purchased the .220 radius grip safety, specifically made for Springfields (the 1st one I have ever found). It did not work on a Range Officer. After filing the sides to get it to fit, there is still a very noticible gap between the "beaver tail" and the frame.... Still waiting on the aftermarket to help me out.
very nice(21.05.2014)
pretty much dropped into my Kimber Custom 2..had to fit the arm to not rub against the frame,adjust for the swartz safety,barely touch the radius.minimal blending....great function great look..very happy with this part!
This was a good choice(28.06.2017)
I bought the .250 radius safety for a build on a ruger frame and slide. Very minimal fitting required and is a huge improvement over the stock part. Very nice and snug fit and will be easily blended, EGW wasn't kidding about how this easily fits the Ruger Sr 1911. Of course service from Brownells was excellent.
EGW BEAVERTAIL GRIP SAFETY(24.01.2012)
EGW is always top quality and looking to improve their products and know what a gunsmith needs. Most frames that are factory cut for .250 beavertails are made for a drop in fit. This means a loose fit with a gap leaving two options, install a .220 S&A beavertail or weld up the rear and recut and blend. With the over sized EGW beavertail you will have to remove the last .005" of the frame tang to get a hair line fit and on top of that cut it flush with the sides of the frame. This gives a true, hair line and full width beavertail as it should be.
EGW is always worth the extra expense as they never let you down.
Produktnr.: 296000184 EGW BEAVERTAIL GRIP SAFETY - BLUE Produsentnr.: 10700841370101337 Beavertail grepssikring maskinert fra massivt stangmateriale er etterlatt litt for stor ved kritiske punkter for å tillate børsemakeren å oppnå en ekte tilpasset passform. Beavertail er bredere enn rammen slik at den kan tilpasses til rammen i stedet for rammen til beavertailen, og hjelper deg med å sikre en tett, klirrefri passform. Total lengde er lengre nederst og vinkelen er tilpasset for å fylle gapet mellom hovedfjærhuset og sikkerheten. Radius er 0,245" for å passe til rammer som er forhåndskutt til 0,250". Pinnehullet er ferdig reamet til 0,158" for å ytterligere forbedre passform og funksjon. Stor kontaktflate sikrer positiv engasjement når hånden griper pistolen. .220 Radius grepssikringer er laget for å passe til Springfield og Caspian rammer.
1349NOK11kr 1 349,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Beavertail grepssikring er maskinert for å tillate en ekte tilpasset passform, med bredere design for å sikre en tett, klirrefri passform.
Passer rammer forhåndskuttet til 0,250" radius og har et ferdig reamet pinnehull på 0,158" for bedre passform og funksjon.
Tilgjengelig i karbonstål, blånet eller rustfritt stål, naturlig sølv, begge med matt finish. Krever tilpasning av børsemaker og passer kun til 1911 Auto Series 70.
Made in USA
US eksport klassifisering: 0A501.x
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr.: 296000185 EGW BEAVERTAIL GRIP SAFETY - STAINLESS STEEL Produsentnr.: 10701841370101351 Beavertail grepssikring maskinert fra massivt stangmateriale er etterlatt litt for stor ved kritiske punkter for å tillate børsemakeren å oppnå en ekte tilpasset passform. Beavertail er bredere enn rammen slik at den kan tilpasses til rammen i stedet for rammen til beavertailen, og hjelper deg med å sikre en tett, klirrefri passform. Total lengde er lengre nederst og vinkelen er tilpasset for å fylle gapet mellom hovedfjærhuset og sikkerheten. Radius er 0,245" for å passe til rammer som er forhåndskutt til 0,250". Pinnehullet er ferdig reamet til 0,158" for å ytterligere forbedre passform og funksjon. Stor kontaktflate sikrer positiv engasjement når hånden griper pistolen. .220 Radius grepssikringer er laget for å passe til Springfield og Caspian rammer.
1449NOK3kr 1 449,00
*
Leveringstid ca. 14-21 dager. 3 stk. på lageret i USA
Produktnr.: 296000199 EGW BEAVERTAIL SAFETY SS .220 Produsentnr.: 10711841370101382 Beavertail grepssikring maskinert fra massivt stangmateriale er etterlatt litt for stor ved kritiske punkter for å tillate børsemakeren å oppnå en ekte tilpasset passform. Beavertail er bredere enn rammen slik at den kan tilpasses til rammen i stedet for rammen til beavertailen, og hjelper deg med å sikre en tett, klirrefri passform. Total lengde er lengre nederst og vinkelen er tilpasset for å fylle gapet mellom hovedfjærhuset og sikkerheten. Radius er 0,245" for å passe til rammer som er forhåndskutt til 0,250". Pinnehullet er ferdig reamet til 0,158" for å ytterligere forbedre passform og funksjon. Stor kontaktflate sikrer positiv engasjement når hånden griper pistolen. .220 Radius grepssikringer er laget for å passe til Springfield og Caspian rammer.
1249NOK0kr 1 249,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Produktnr.: 296000200 EGW BEAVERTAIL SAFETY CS .220 Produsentnr.: 10710841370101375 Beavertail grepssikring maskinert fra massivt stangmateriale er etterlatt litt for stor ved kritiske punkter for å tillate børsemakeren å oppnå en ekte tilpasset passform. Beavertail er bredere enn rammen slik at den kan tilpasses til rammen i stedet for rammen til beavertailen, og hjelper deg med å sikre en tett, klirrefri passform. Total lengde er lengre nederst og vinkelen er tilpasset for å fylle gapet mellom hovedfjærhuset og sikkerheten. Radius er 0,245" for å passe til rammer som er forhåndskutt til 0,250". Pinnehullet er ferdig reamet til 0,158" for å ytterligere forbedre passform og funksjon. Stor kontaktflate sikrer positiv engasjement når hånden griper pistolen. .220 Radius grepssikringer er laget for å passe til Springfield og Caspian rammer.
1349NOK0kr 1 349,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Beavertail grip safety machined from solid barstock is left slightly oversized at critical points to allow the gunsmith to achieve a true custom fit. Beavertail is wider than the frame so it can be fit to the frame instead of the frame to the beavertail, and helps you ensure a snug, rattle-free fit. Overall length is longer at the bottom and the angle is a match to fill the gap between the mainspring housing and the safety. Radius is .245" to fit frames that are pre-cut to .250". Pin hole is finish reamed to .158" to further improve fit and function. Large contact pad ensures positive engagement when the hand grasps the gun. .220 Radius grip safeties are made to fit Springfield and Caspian frames.
Carbon steel, blued, or stainless steel, natural silver, both with a matte finish. Fits 1911 Auto Series 70 only. Gunsmith fitting required.
Mer...
Beavertail grepssikring maskinert fra massivt stangmateriale er etterlatt litt for stor ved kritiske punkter for å tillate børsemakeren å oppnå en ekte tilpasset passform. Beavertail er bredere enn rammen slik at den kan tilpasses til rammen i stedet for rammen til beavertailen, og hjelper deg med å sikre en tett, klirrefri passform. Total lengde er lengre nederst og vinkelen er tilpasset for å fylle gapet mellom hovedfjærhuset og sikkerheten. Radius er 0,245" for å passe til rammer som er forhåndskutt til 0,250". Pinnehullet er ferdig reamet til 0,158" for å ytterligere forbedre passform og funksjon. Stor kontaktflate sikrer positiv engasjement når hånden griper pistolen. .220 Radius grepssikringer er laget for å passe til Springfield og Caspian rammer.
Karbonstål, blånet, eller rustfritt stål, naturlig sølv, begge med matt finish. Passer kun til 1911 Auto Series 70. Krever tilpasning av børsemaker.
Mer...
Kundevurderinger for EGW BEAVERTAIL GRIP SAFETY - BLUE
Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 4
Perfect for SA 1911's(07.02.2017)
I'd been wanting to work on an SA 1911 that I'd originally bought as a project gun which I bought . When I'd finally gotten around to it, I started looking here. Luckily EGW makes one that fits to SA model frames. I took the advice of staff here and bought the right jig for a .220 radius and after filling and fitting, it works perfectly. Fitting is required, and while yes one could list that it's a "con" that it's necessary, anyone who works on 1911's knows no part is truly 'drop in'.
Fit to finish is nice, and the radius was perfect. I'll be looking at EGW parts if I'm looking at working on other SA 1911's.
Drop-In Fit in Springfield Range Officer(05.05.2013)
This product was purchased to replace the original, which was broken in an unsuccessful fitting attempt. The pistol is a Springfield Armory Range Officer, purchased new in early 2013.
This part is a drop-in fit for the gun. There was a tiny bit of resistance as it was slipped into the frame, but after cycling it a few times it is perfectly smooth. The safety functions perfectly and it has had no adverse effect on any other aspect of operation of the gun.
This part is a slightly darker color than the original (which is very dark gray), and is more black than blue, but I'm willing to accept the difference in exchange for the fit and function.
This continues my 100% successful streak when I buy EGW parts.
Great high quality(04.10.2015)
Got this for my SA Trophy Match in 4 days from my research and order. All I can say is Thank You Brownells for helping me learn and become a better arms fixer.
Worst beaver tail(21.07.2017)
This is the worst beaver tail I've seen doesn't fit and after hours of grinding and fileing it still dosent fit don't waste your money.
.220 Springfield(10.02.2013)
I purchased the .220 radius grip safety, specifically made for Springfields (the 1st one I have ever found). It did not work on a Range Officer. After filing the sides to get it to fit, there is still a very noticible gap between the "beaver tail" and the frame.... Still waiting on the aftermarket to help me out.
very nice(21.05.2014)
pretty much dropped into my Kimber Custom 2..had to fit the arm to not rub against the frame,adjust for the swartz safety,barely touch the radius.minimal blending....great function great look..very happy with this part!
This was a good choice(28.06.2017)
I bought the .250 radius safety for a build on a ruger frame and slide. Very minimal fitting required and is a huge improvement over the stock part. Very nice and snug fit and will be easily blended, EGW wasn't kidding about how this easily fits the Ruger Sr 1911. Of course service from Brownells was excellent.
EGW BEAVERTAIL GRIP SAFETY(24.01.2012)
EGW is always top quality and looking to improve their products and know what a gunsmith needs. Most frames that are factory cut for .250 beavertails are made for a drop in fit. This means a loose fit with a gap leaving two options, install a .220 S&A beavertail or weld up the rear and recut and blend. With the over sized EGW beavertail you will have to remove the last .005" of the frame tang to get a hair line fit and on top of that cut it flush with the sides of the frame. This gives a true, hair line and full width beavertail as it should be.
EGW is always worth the extra expense as they never let you down.