Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

ED BROWN
1911 TWO-PIECE GUIDE ROD

800732889009 087045889

Prevents Recoil Spring Bind; Makes Takedown Easier

Full-length, two piece design fully supports the recoil spring to help the pistol chamber, extract and cycle smoother. Helps prevent spring bind, makes slide takedown fast and simple. Long wearing, shock-resistant head and hardened stainless steel shaft stand up to both competition and duty use.

SPECS: Stainless steel. Includes guide rod plug and 5/32" Allen wrench.

Mer...

Forebygger Binding av Rekylfjær; Gjør Demontering Enklere

Full-lengde, to-delt design som fullt ut støtter rekylfjæren for å hjelpe pistolen med kamring, utdragning og syklus på en jevnere måte. Bidrar til å forhindre binding av rekylfjæren, gjør demontering av sliden rask og enkel. Langvarig, støtsikker hode og herdet rustfritt stål skaft tåler både konkurranse og tjenestebruk.

SPECS: Rustfritt stål. Inkluderer guide rod plugg og 5/32" unbrakonøkkel.

Mer...

Kundevurderinger for ED BROWN TWO PIECE GUIDE ROD FITS GOVT. 5"

Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 4,4

It may work with some machining (03.05.2010)

Easy to install - needs some work on it to look right, rod to long, sticks out 1/8 inch in front of barrel bushing.

NOT TOO LONG FOR 4.25" COMMANDER (27.09.2012)

THIS IS VERY WELL MADE PART. DROPS RIGHT IN ON TRUE COMMANDERS. JUST MAKE SURE IT'S A 4.25" BARRELED COMMANDER. IF YOUR COMMANDER HAS A 4" BARREL IT WILL OBVIOUSLY BE A LITTLE LONG. I'VE PUT THEM IN COLTS & DAN WESSONS FOR CUSTOMERS & THEY WHERE VERY PLEASED!

Great product (01.09.2016)

This is a high quality product. It's sized perfectly for my Colt pistol.

Controls heavy recoil from +P loads (06.01.2012)

I wasn't really looking to upgrade my mil-spec guide rod until I test fired a friends 1911 with this product installed and I was amazed at the difference. Needless to say it is installed in my weapon and it truly tames those +P rounds. I wouldn't recommend firing super hot ammo all the time, but I like to practice with what I intend to use for self defense. I loved this product!

Good Rock Island1911 after alteration (25.02.2012)

I had to grind a little bit of material off of the round section of the back of the guid rod base. It was not letting the base site flush. I have a 2011 Rock Island full size 1911 A1FS GI.

Good after minor alteration (25.02.2012)

It requred some grinding of the round backing in order for it not to get stuck in a position that caued binding. I put it on a 2011 Rock Island 1922 A!FS.

EASY UPGRADE (27.09.2012)

I'VE INSTALLED ALOT OF THESE IN CUSTOMERS GUNS. COLT, SPRINGFIELD, KIMBER, DAN WESSON, TAURUS, ETC.. ALL THE BENEFITS OF A 1-PIECE GUIDE ROD BUT MAKES IT MUCH EASIER TO DISASSEMBLE. I'VE NEVER HAD TO GRIND ON 1 OR MODIFIY IN ANY WAY. BEAUTIFUL FINISH, LOOKS LIKE ONE SOLID PIECE UNTIL YOU UNSREW IT.

Over All Good Drop In Upgrade (09.06.2014)

I installed this on my Ruger SR1911 and it was a perfect fit. The OAL was spot on. Very easy to install (if you can field strip your weapon you can install this part)and the included allen wrench actually fits. A bit of a rarity as far as included tools go these days, and it's not a soft steel wrench that rounds off easily. Not that you need a lot of torque on this. The spring cup to guide rod fit is surprisingly tight. Another advantage that is not in the description is a little added muzzle weight. Not enough to be a bother while sighting but helps to reduce muzzle rise just slightly. I also suspect the spring cup to be slightly thicker between the spring and barrel bushing. The new parts went in a little stiffer than the factory parts did. My pistol only had about a box of ammo through it before the upgrade.
The only thing I think I'll be doing to improve this part is a bit of polishing. I can feel the spring rub against the guide rod, but if I were more patient I'm sure the parts would smooth themselves out with a few trips to the range.
In conclusion I would recommend this as a simple upgrade to any level of 1911 shooter. I'll be ordering more for my other govt' models.

1911 TAURUS (30.06.2015)

Fits perfect on my taurus PT 1911

Les 9 flere anmeldelser fra brownells.com

749 799 2 NOK

Produktnr.: 087045889
ED BROWN TWO PIECE GUIDE ROD FITS GOVT. 5"
Produsentnr.: 889 800732889009 Full-lengde, to-delt design som fullt ut støtter rekylfjæren for å hjelpe pistolen med kamring, utdragning og syklus på en jevnere måte. Bidrar til å forhindre binding av rekylfjæren, gjør demontering av sliden rask og enkel. Langvarig, støtsikker hode og herdet rustfritt stål skaft tåler både konkurranse og tjenestebruk.

749 NOK 10 kr 749,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Make: 1911 Modell: Government

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Full-lengde, to-delt design som støtter rekylfjæren og forbedrer pistolens ytelse.
Enkel demontering av sliden med inkludert 5/32" unbrakonøkkel.
Langvarig og holdbar konstruksjon i herdet rustfritt stål, egnet for både konkurranse og tjenestebruk.

Attributes

Make: 1911 Modell: Government Leveringsvekt: 0,064kg Frakthøyde: 13mm Fraktbredde: 83mm Fraktlengde: 146mm UPC : 800732889009

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Produktnr.: 087045890
ED BROWN TWO PIECE GUIDE ROD FITS COMMANDER 4 1/4"
Produsentnr.: 889C 800732889023 Full-lengde, to-delt design som fullt ut støtter rekylfjæren for å hjelpe pistolen med kamring, utdragning og syklus på en jevnere måte. Bidrar til å forhindre binding av rekylfjæren, gjør demontering av sliden rask og enkel. Langvarig, støtsikker hode og herdet rustfritt stål skaft tåler både konkurranse og tjenestebruk.

799 NOK 2 kr 799,00 *

Leveringstid ca. 14-21 dager.
2 stk. på lageret i USA

Spesifikasjoner: Make: 1911 Modell: Commander

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Oppdag 1911 to-delt guide rod fra ED BROWN! ✨ Forbedrer kamring og syklus for en jevnere skyting. Perfekt for konkurranse og tjenestebruk.

Prevents Recoil Spring Bind; Makes Takedown Easier

SPECS: Stainless steel. Includes guide rod plug and 5/32" Allen wrench.

Mer...

Forebygger Binding av Rekylfjær; Gjør Demontering Enklere

SPECS: Rustfritt stål. Inkluderer guide rod plugg og 5/32" unbrakonøkkel.

Mer...

Kundevurderinger for ED BROWN TWO PIECE GUIDE ROD FITS GOVT. 5"

Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 4,4

It may work with some machining (03.05.2010)

Easy to install - needs some work on it to look right, rod to long, sticks out 1/8 inch in front of barrel bushing.

NOT TOO LONG FOR 4.25" COMMANDER (27.09.2012)

Great product (01.09.2016)

This is a high quality product. It's sized perfectly for my Colt pistol.

Controls heavy recoil from +P loads (06.01.2012)

Good Rock Island1911 after alteration (25.02.2012)

I had to grind a little bit of material off of the round section of the back of the guid rod base. It was not letting the base site flush. I have a 2011 Rock Island full size 1911 A1FS GI.

Good after minor alteration (25.02.2012)

It requred some grinding of the round backing in order for it not to get stuck in a position that caued binding. I put it on a 2011 Rock Island 1922 A!FS.

EASY UPGRADE (27.09.2012)