TSR "W" Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases.
SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8" (15.8mm) wide. Height measured from top of base to center of ring. 30mm - Low: .925" (23.5mm).
Mer...
TSR "W" Series Rings, presist maskinert fra en legeringsstålblokk, med toleranser holdt til .0002", gir maksimal kontakt mellom sikte og ring. Holder sikte sikkert på plass mot rekyl. Fire-skruekappen lar deg justere retikkelet, stramme venstre side av kappen, deretter høyre side uten at siktet roterer. Avrundede kanter og hjørner bidrar til å forhindre hekting samtidig som de gir et attraktivt utseende. Stor klemmemutter lar deg dreie ringene til Weaver-stil eller Mil-STD 1913 (Picatinny) baser.
SPECS: Legeringsstål, sort oksidfinish i henhold til Mil-C-13924 standarder. 5/8" (15,8mm) bred. Høyde målt fra toppen av basen til senter av ringen. 30mm - Lav: .925" (23,5mm).
Mer...
Kundevurderinger for TPS PRODUCTS TSR-W STEEL RINGS 30MM HIGH
Antall vurderinger: 11
Fra brownells.com: 11
Gjennomsnittsvurdering: 4,9
tps 30mm high steel rings(15.01.2010)
these rings are the as good maybe better than my $150 rings every thing about them is machined to perfection I will order these rings from now on for me and my customers
Fantastic product(19.09.2009)
I love these rings.I have 5 sets on all my tactical rifles including a 50 BMG and a 338 Lapua.They hold the same zero as similar rings I own by Leupold and Badger.If your trying to watch your budget,I would recommend these without hesitation.
Well Machined, Solid Rings(12.07.2012)
Great rings, have heard some negatives with the aluminum, but the steel at least are beastly.
TPS TSR W rings are best for accuracy(10.12.2012)
After getting fliers with other rings, I researched the market and found that TPS made their steel rings to very high standards of tolerance and decided to give them a try. Using medium rings on M14, 5-shot groups with 308 at 100 yards reduced from 2.5" with fliers to compact and consistent 1.75" (still developing load). Now I am buying another pair of TPS TSR W rings for Rem 870 slugger, but this time getting low rings. The TPS steel rings are adding an oz or 2 compared to Millet, but quality is superb.
Best Ever(05.01.2011)
I've shot rifles and hunted all of my life, and these are by far the best rings I've ever used. They are everything the manufacturer says they are and more. I own 3 sets of these rings and from now on plan to use them on all other rifles in the future.
Absolutely Awesome(23.11.2009)
Dollar for dollar the best money can buy. I own 3 sets and am currently going thru a retrofit process to change every gun in my fleet to have a pair of these. Built like tanks and perfect in fit and finish. can not say enough about the quality you get here.
Great rings at a great price(26.09.2012)
Mounted these for a customer, and they are great rings. Great holding power, and a very snug fit to the scope. Compairing these to other rings, they are top quality. The price is better than any other ring for the same quality. Highly recommend.
Nice rings but could have tougher finish(06.11.2014)
Pros: nice design, easy to install, sturdy.
Cons: the finish.
After getting the rings, I put my project on hold. I had ordered 2 sets (4 rings). After about a couple years sitting in my garage there was rust. Not much but it was there. I live in So Cal where we dont get much rain since we're in a drought. I feel that the finish could have been more "durable" otherwise I would have given 5 stars.
solid rings(28.02.2010)
I used these on my ar-15 after trying a cheap set. The fit on these rings is perfect. Quick installation. I did use medium strength loc-tite as I did not have a torque wrench with the specified setting. Because the fit is so precise I would recommend only using machined, not extruded risers. That is unless you have access to milling machine like I did. Well worth the money.
Unbelievable rings!(09.10.2010)
I purchased a set of these for my flat-top varmint AR15 upper - a RRA EOP 24" upper. There are a ton of high-end rings out there, but for the money, I dare you to find a better ring. I think these are every bit as good, if not better than, the much bragged-about Leupold MK4 rings (which I also own). This company builds a really superb product.
TPS TSR W rings are best for accuracy(16.02.2013)
These rings are of excellent quality. Installation instructions are concise and easy to understand and implement. The rings accommodated extra tube diameter caused by factory camo paint as well. The set is worth every buck.
Produktnr.: 100001411 TPS PRODUCTS TSR-W STEEL RINGS 30MM HIGH Produsentnr.: 30672071611306720 TSR "W" Series Rings, presist maskinert fra en legeringsstålblokk, med toleranser holdt til .0002", gir maksimal kontakt mellom sikte og ring. Holder sikte sikkert på plass mot rekyl. Fire-skruekappen lar deg justere retikkelet, stramme venstre side av kappen, deretter høyre side uten at siktet roterer. Avrundede kanter og hjørner bidrar til å forhindre hekting samtidig som de gir et attraktivt utseende. Stor klemmemutter lar deg dreie ringene til Weaver-stil eller Mil-STD 1913 (Picatinny) baser.
Produktnr.: 100001404 TPS PRODUCTS TSR-W STEEL RINGS 1" MEDIUM Produsentnr.: 30601071611306010 TSR "W" Series Rings, presist maskinert fra en legeringsstålblokk, med toleranser holdt til .0002", gir maksimal kontakt mellom sikte og ring. Holder sikte sikkert på plass mot rekyl. Fire-skruekappen lar deg justere retikkelet, stramme venstre side av kappen, deretter høyre side uten at siktet roterer. Avrundede kanter og hjørner bidrar til å forhindre hekting samtidig som de gir et attraktivt utseende. Stor klemmemutter lar deg dreie ringene til Weaver-stil eller Mil-STD 1913 (Picatinny) baser.
Produktnr.: 100001403 TPS PRODUCTS TSR-W STEEL RINGS 1" LOW Produsentnr.: 30600071611306003 TSR "W" Series Rings, presist maskinert fra en legeringsstålblokk, med toleranser holdt til .0002", gir maksimal kontakt mellom sikte og ring. Holder sikte sikkert på plass mot rekyl. Fire-skruekappen lar deg justere retikkelet, stramme venstre side av kappen, deretter høyre side uten at siktet roterer. Avrundede kanter og hjørner bidrar til å forhindre hekting samtidig som de gir et attraktivt utseende. Stor klemmemutter lar deg dreie ringene til Weaver-stil eller Mil-STD 1913 (Picatinny) baser.
Produktnr.: 100001409 TPS PRODUCTS TSR-W STEEL RINGS 30MM LOW Produsentnr.: 30670071611306706 TSR "W" Series Rings, presist maskinert fra en legeringsstålblokk, med toleranser holdt til .0002", gir maksimal kontakt mellom sikte og ring. Holder sikte sikkert på plass mot rekyl. Fire-skruekappen lar deg justere retikkelet, stramme venstre side av kappen, deretter høyre side uten at siktet roterer. Avrundede kanter og hjørner bidrar til å forhindre hekting samtidig som de gir et attraktivt utseende. Stor klemmemutter lar deg dreie ringene til Weaver-stil eller Mil-STD 1913 (Picatinny) baser.
Produktnr.: 100001410 TPS PRODUCTS TSR-W STEEL RINGS 30MM MEDIUM Produsentnr.: 30671071611306713 TSR "W" Series Rings, presist maskinert fra en legeringsstålblokk, med toleranser holdt til .0002", gir maksimal kontakt mellom sikte og ring. Holder sikte sikkert på plass mot rekyl. Fire-skruekappen lar deg justere retikkelet, stramme venstre side av kappen, deretter høyre side uten at siktet roterer. Avrundede kanter og hjørner bidrar til å forhindre hekting samtidig som de gir et attraktivt utseende. Stor klemmemutter lar deg dreie ringene til Weaver-stil eller Mil-STD 1913 (Picatinny) baser.
Produktnr.: 100003300 TPS PRODUCTS TSR-W STEEL RINGS 34MM MEDIUM Produsentnr.: 30691071611306911 TSR "W" Series Rings, presist maskinert fra en legeringsstålblokk, med toleranser holdt til .0002", gir maksimal kontakt mellom sikte og ring. Holder sikte sikkert på plass mot rekyl. Fire-skruekappen lar deg justere retikkelet, stramme venstre side av kappen, deretter høyre side uten at siktet roterer. Avrundede kanter og hjørner bidrar til å forhindre hekting samtidig som de gir et attraktivt utseende. Stor klemmemutter lar deg dreie ringene til Weaver-stil eller Mil-STD 1913 (Picatinny) baser.
Produktnr.: 100020417 TPS PRODUCTS TSR-W ALUMINUM RINGS 1" LOW Produsentnr.: 30620071611306201 TSR "W" Series Rings, presist maskinert fra en legeringsstålblokk, med toleranser holdt til .0002", gir maksimal kontakt mellom sikte og ring. Holder sikte sikkert på plass mot rekyl. Fire-skruekappen lar deg justere retikkelet, stramme venstre side av kappen, deretter høyre side uten at siktet roterer. Avrundede kanter og hjørner bidrar til å forhindre hekting samtidig som de gir et attraktivt utseende. Stor klemmemutter lar deg dreie ringene til Weaver-stil eller Mil-STD 1913 (Picatinny) baser.
Produktnr.: 100020421 TPS PRODUCTS TSR-W ALUMINUM RINGS 30MM LOW Produsentnr.: 30680071611306805 TSR "W" Series Rings, presist maskinert fra en legeringsstålblokk, med toleranser holdt til .0002", gir maksimal kontakt mellom sikte og ring. Holder sikte sikkert på plass mot rekyl. Fire-skruekappen lar deg justere retikkelet, stramme venstre side av kappen, deretter høyre side uten at siktet roterer. Avrundede kanter og hjørner bidrar til å forhindre hekting samtidig som de gir et attraktivt utseende. Stor klemmemutter lar deg dreie ringene til Weaver-stil eller Mil-STD 1913 (Picatinny) baser.
Produktnr.: 100020422 TPS PRODUCTS TSR-W ALUMINUM RINGS 30MM MEDIUM Produsentnr.: 30681071611306812 TSR "W" Series Rings, presist maskinert fra en legeringsstålblokk, med toleranser holdt til .0002", gir maksimal kontakt mellom sikte og ring. Holder sikte sikkert på plass mot rekyl. Fire-skruekappen lar deg justere retikkelet, stramme venstre side av kappen, deretter høyre side uten at siktet roterer. Avrundede kanter og hjørner bidrar til å forhindre hekting samtidig som de gir et attraktivt utseende. Stor klemmemutter lar deg dreie ringene til Weaver-stil eller Mil-STD 1913 (Picatinny) baser.
Produktnr.: 100036967 TPS PRODUCTS 34MM HIGH (1.435 ) ALUMINUM RINGS Produsentnr.: 30697071611306973 TSR "W" Series Rings, presist maskinert fra en legeringsstålblokk, med toleranser holdt til .0002", gir maksimal kontakt mellom sikte og ring. Holder sikte sikkert på plass mot rekyl. Fire-skruekappen lar deg justere retikkelet, stramme venstre side av kappen, deretter høyre side uten at siktet roterer. Avrundede kanter og hjørner bidrar til å forhindre hekting samtidig som de gir et attraktivt utseende. Stor klemmemutter lar deg dreie ringene til Weaver-stil eller Mil-STD 1913 (Picatinny) baser.
TSR "W" Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002", give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases.
SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8" (15.8mm) wide. Height measured from top of base to center of ring. 30mm - Low: .925" (23.5mm).
Mer...
TSR "W" Series Rings, presist maskinert fra en legeringsstålblokk, med toleranser holdt til .0002", gir maksimal kontakt mellom sikte og ring. Holder sikte sikkert på plass mot rekyl. Fire-skruekappen lar deg justere retikkelet, stramme venstre side av kappen, deretter høyre side uten at siktet roterer. Avrundede kanter og hjørner bidrar til å forhindre hekting samtidig som de gir et attraktivt utseende. Stor klemmemutter lar deg dreie ringene til Weaver-stil eller Mil-STD 1913 (Picatinny) baser.
SPECS: Legeringsstål, sort oksidfinish i henhold til Mil-C-13924 standarder. 5/8" (15,8mm) bred. Høyde målt fra toppen av basen til senter av ringen. 30mm - Lav: .925" (23,5mm).
Mer...
Kundevurderinger for TPS PRODUCTS TSR-W STEEL RINGS 30MM HIGH
Antall vurderinger: 11
Fra brownells.com: 11
Gjennomsnittsvurdering: 4,9
tps 30mm high steel rings(15.01.2010)
these rings are the as good maybe better than my $150 rings every thing about them is machined to perfection I will order these rings from now on for me and my customers
Fantastic product(19.09.2009)
I love these rings.I have 5 sets on all my tactical rifles including a 50 BMG and a 338 Lapua.They hold the same zero as similar rings I own by Leupold and Badger.If your trying to watch your budget,I would recommend these without hesitation.
Well Machined, Solid Rings(12.07.2012)
Great rings, have heard some negatives with the aluminum, but the steel at least are beastly.
TPS TSR W rings are best for accuracy(10.12.2012)
After getting fliers with other rings, I researched the market and found that TPS made their steel rings to very high standards of tolerance and decided to give them a try. Using medium rings on M14, 5-shot groups with 308 at 100 yards reduced from 2.5" with fliers to compact and consistent 1.75" (still developing load). Now I am buying another pair of TPS TSR W rings for Rem 870 slugger, but this time getting low rings. The TPS steel rings are adding an oz or 2 compared to Millet, but quality is superb.
Best Ever(05.01.2011)
I've shot rifles and hunted all of my life, and these are by far the best rings I've ever used. They are everything the manufacturer says they are and more. I own 3 sets of these rings and from now on plan to use them on all other rifles in the future.
Absolutely Awesome(23.11.2009)
Dollar for dollar the best money can buy. I own 3 sets and am currently going thru a retrofit process to change every gun in my fleet to have a pair of these. Built like tanks and perfect in fit and finish. can not say enough about the quality you get here.
Great rings at a great price(26.09.2012)
Mounted these for a customer, and they are great rings. Great holding power, and a very snug fit to the scope. Compairing these to other rings, they are top quality. The price is better than any other ring for the same quality. Highly recommend.
Nice rings but could have tougher finish(06.11.2014)
Pros: nice design, easy to install, sturdy.
Cons: the finish.
After getting the rings, I put my project on hold. I had ordered 2 sets (4 rings). After about a couple years sitting in my garage there was rust. Not much but it was there. I live in So Cal where we dont get much rain since we're in a drought. I feel that the finish could have been more "durable" otherwise I would have given 5 stars.
solid rings(28.02.2010)
I used these on my ar-15 after trying a cheap set. The fit on these rings is perfect. Quick installation. I did use medium strength loc-tite as I did not have a torque wrench with the specified setting. Because the fit is so precise I would recommend only using machined, not extruded risers. That is unless you have access to milling machine like I did. Well worth the money.
Unbelievable rings!(09.10.2010)
I purchased a set of these for my flat-top varmint AR15 upper - a RRA EOP 24" upper. There are a ton of high-end rings out there, but for the money, I dare you to find a better ring. I think these are every bit as good, if not better than, the much bragged-about Leupold MK4 rings (which I also own). This company builds a really superb product.
TPS TSR W rings are best for accuracy(16.02.2013)
These rings are of excellent quality. Installation instructions are concise and easy to understand and implement. The rings accommodated extra tube diameter caused by factory camo paint as well. The set is worth every buck.