Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

TIMNEY
BUEHLER-STYLE LOW SAFETY

081950010011 883804098

Positive Stops At On & Off; Simple, Fast Installation

The re-make of the famous Buehler Low Safety. Faster and much more convenient to operate than the factory safety plus, it will not interfere with even the lowest mounted scopes. Rotates through a 70° arc on the right side of the rifle with positive stops in both the "on" and "off" positions. Securely holds the bolt and the striker in the locked position. Precision CNC machined from high-quality steel, hardened at all wear points, polished and blued. No machining required for installation on M98. M93/96 may require grinding of cocking piece.

SPECS: Steel, blued. .490" (12.4mm) wide, .725" (18.4mm) long. M98 fits Mauser M98 & FN. M93/96 fits Mauser 93, 94, 95, 96 & 97 Small Ring.

Mer...

Positive stopp ved På & Av; Enkel, rask installasjon

En nyutgave av den berømte Buehler Low Safety. Raskere og mye mer praktisk å betjene enn fabrikkens sikring, pluss at den ikke vil forstyrre selv de lavest monterte sikter. Roterer gjennom en 70° bue på høyre side av riflen med positive stopp i både "på" og "av" posisjonene. Holder sikkert sluttstykket og tennstempelet i låst posisjon. Presisjon CNC-maskinert fra høykvalitets stål, herdet på alle slitasjepunkter, polert og blånet. Ingen maskinering kreves for installasjon på M98. M93/96 kan kreve sliping av tennstykke.

SPECS: Stål, blånet. .490" (12.4mm) bred, .725" (18.4mm) lang. M98 passer til Mauser M98 & FN. M93/96 passer til Mauser 93, 94, 95, 96 & 97 Small Ring.

Mer...

Kundevurderinger for TIMNEY M98 SAFETY

Antall vurderinger: 13
Fra brownells.com: 13
Gjennomsnittsvurdering: 3,2

Requires Machining to Install (16.11.2009)

On the M-96 Swedish Mauser this safety requires at least 1/8" removed from the cocking piece to clear the safety body with a countersink for the safety screw head (my option). The other option is to grind about half of the cocking piece off on the safety side. Either way you also need to grind an angle on the cocking piece where the safety engages it. It helps to increase the bevel on the safety as well. The safety works okay - about like a Mark 2. Timney should modify to eliminate the machining - it wouldn't take much.

Nice product (01.10.2011)

I had to remove a bit of the lip on the lever portion to clear the standard safety ridge on the bolt shroud, and had to bevel down the engagement ramp as it will not clear the cocking piece as it comes. I used a Dremel with a cut-off wheel(VERY gently), and then a 240 sanding wheel to smooth it out. You could probably do the same with various grit sanding wheels. The screw is a T-7.

Does not work (15.08.2012)

Safety does not have spring and detent so is not functional as sent.

Beware of LOCTITE!!!!! (10.12.2014)

Installed this on a Voere, commercial Mauser. Pretty much dropped right in, I'll have to SLIGHTLY releive the cocking peice, but no big deal...

The BIG issue I had:

Timney apparently decided it was necessary to RED LOCTITE the screw in, on a part that HAS to be taken apart for installation!!!!!!!

Needless to say I have a stripped allen screw, and a pretty ugly mark on it where I wound up using pliers to then get the screw out!!!!!

IF you buy this, put some heat to it before you try to take the screw out.....

A product that really works (15.09.2009)

Very easy to install

Fitting was required! (01.06.2010)

I ordered the m98 safety, but the one I received must have been the m93/96. It required removal of quite a bit of material to fit properly.

Best aftermarket Mauser safety (16.08.2010)

Easy to install... just read and follow the directions. If you don't know enough or can't install this item correctly, you shouldn't be messing with the safety in the first place.

Great Product (05.03.2013)

I have installed over twenty of these safeties.. they are the best aftermarket M-98 Mauser safety available.... period!!!

Works well (10.02.2014)

I installed this safety on a Czech Brno 98 Mauser. I needed to grind away a little material off of the cocking piece to get it to work, but that is part of the normal installation. Going slow and testing it over and over as you remove material will get you a good fit. It's a good deal for the money. It's not a perfectly smooth safety, but it is way better than the original 3 position safety and this one will clear the scope.

Didn't work for me (21.07.2014)

Skimpy on the instructions and requires more fitting than I have tools for. Mine went in the spare parts box.

Overpriced garbage (17.07.2015)

tried installing in a vz-24 doesn't even bother to allow the bolt shroud to fully spin back into the bolt body.

Much love for Timney (12.12.2015)

Much easier to install than previous options. Looks great, works great. Take it to a smith for proper installation and testing because it is worth having on your Mauser.

Great part. Not so great instructions (29.09.2016)

I might be fortunate. I see some other reviews where fitting was required. This wasn't the case with my rifle. The timney safety dropped right in and was an excellent fit in my BRNO VZ24.

The instructions were a little light. I think they could have been a little more descriptive with the directions. Thankfully I am familiar with how a 98 Mauser safety works, and was able to get it installed regardless. Had it not been for the light instructions I would have rated this part 5 stars.

Les 13 flere anmeldelser fra brownells.com

1599 1599 2 NOK

Produktnr.: 883804098
TIMNEY M98 SAFETY
Produsentnr.: 1001 081950010011 En nyutgave av den berømte Buehler Low Safety. Raskere og mye mer praktisk å betjene enn fabrikkens sikring, pluss at den ikke vil forstyrre selv de lavest monterte sikter. Roterer gjennom en 70° bue på høyre side av riflen med positive stopp i både "på" og "av" posisjonene. Holder sikkert sluttstykket og tennstempelet i låst posisjon. Presisjon CNC-maskinert fra høykvalitets stål, herdet på alle slitasjepunkter, polert og blånet. Ingen maskinering kreves for installasjon på M98. M93/96 kan kreve sliping av tennstykke.

1599 NOK 23 kr 1 599,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Make: Mauser Modell: 98

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

En nyutgave av Buehler Low Safety som er raskere og mer praktisk enn fabrikkens sikring, uten å forstyrre lavt monterte sikter.
Presisjon CNC-maskinert fra høykvalitets stål, herdet på slitasjepunkter, polert og blånet, med enkel installasjon på M98.
Roterer gjennom en 70° bue med positive stopp i "på" og "av" posisjoner, og holder sluttstykket og tennstempelet i låst posisjon.

Attributes

Make: Mauser Modell: 98 Leveringsvekt: 0,036kg Frakthøyde: 13mm Fraktbredde: 79mm Fraktlengde: 107mm UPC : 081950010011

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Produktnr.: 883805096
TIMNEY M93/96 SAFETY
Produsentnr.: 1002 081950010028 En nyutgave av den berømte Buehler Low Safety. Raskere og mye mer praktisk å betjene enn fabrikkens sikring, pluss at den ikke vil forstyrre selv de lavest monterte sikter. Roterer gjennom en 70° bue på høyre side av riflen med positive stopp i både "på" og "av" posisjonene. Holder sikkert sluttstykket og tennstempelet i låst posisjon. Presisjon CNC-maskinert fra høykvalitets stål, herdet på alle slitasjepunkter, polert og blånet. Ingen maskinering kreves for installasjon på M98. M93/96 kan kreve sliping av tennstykke.

1599 NOK 0 kr 1 599,00 *

Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

Spesifikasjoner: Make: Mauser Modell: 94, 93, 96, 95

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Oppdag Buehler-Style Low Safety for M98! 🔒 Rask, praktisk og presis. Perfekt for Mauser-rifler. Få sikkerhet uten å forstyrre siktene!

Positive Stops At On & Off; Simple, Fast Installation

SPECS: Steel, blued. .490" (12.4mm) wide, .725" (18.4mm) long. M98 fits Mauser M98 & FN. M93/96 fits Mauser 93, 94, 95, 96 & 97 Small Ring.

Mer...

Positive stopp ved På & Av; Enkel, rask installasjon

SPECS: Stål, blånet. .490" (12.4mm) bred, .725" (18.4mm) lang. M98 passer til Mauser M98 & FN. M93/96 passer til Mauser 93, 94, 95, 96 & 97 Small Ring.

Mer...

Kundevurderinger for TIMNEY M98 SAFETY

Antall vurderinger: 13
Fra brownells.com: 13
Gjennomsnittsvurdering: 3,2

Requires Machining to Install (16.11.2009)

Nice product (01.10.2011)

Does not work (15.08.2012)

Safety does not have spring and detent so is not functional as sent.

Beware of LOCTITE!!!!! (10.12.2014)

A product that really works (15.09.2009)

Very easy to install

Fitting was required! (01.06.2010)

I ordered the m98 safety, but the one I received must have been the m93/96. It required removal of quite a bit of material to fit properly.

Best aftermarket Mauser safety (16.08.2010)

Easy to install... just read and follow the directions. If you don't know enough or can't install this item correctly, you shouldn't be messing with the safety in the first place.

Great Product (05.03.2013)

I have installed over twenty of these safeties.. they are the best aftermarket M-98 Mauser safety available.... period!!!

Works well (10.02.2014)

Didn't work for me (21.07.2014)

Skimpy on the instructions and requires more fitting than I have tools for. Mine went in the spare parts box.

Overpriced garbage (17.07.2015)

tried installing in a vz-24 doesn't even bother to allow the bolt shroud to fully spin back into the bolt body.

Much love for Timney (12.12.2015)

Much easier to install than previous options. Looks great, works great. Take it to a smith for proper installation and testing because it is worth having on your Mauser.

Great part. Not so great instructions (29.09.2016)

Les 13 flere anmeldelser fra brownells.com