Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

APEX TACTICAL SPECIALTIES INC
S&W SHIELD ACTION ENHANCEMENT TRIGGER & DUTY/CARRY KIT

854263007036 100023497

The Shield Action Enhancement Trigger Kit directly replaces the factory hinged trigger with a solid aluminum trigger body. The trigger reduces Trigger pre-travel and over-travel by approximately 20%. It features a flat face with a center mounted pivoting safety. The center mounted pivoting safety bar prevents unintended operation by creating a trigger block that will not disengage unless the shooter places their finger directly on the trigger face. The flat, smooth face trigger causes the shooter to place their finger on the center line of the trigger and encourages trigger manipulation directly in line with the bore axis. The Shield Action Enhancement Trigger is perfect for use with the M&P Shield already equipped with the Apex Shield Carry Kit. This kit is a combination of the Shield Duty/Carry Action Enhancement Kit and the Shield Action Enhancement Trigger. The APEX Shield Carry Kit Kit (SCK) was designed to provide the M&P Shield pistol owner a smooth, consistent 5 - 5.5 lb trigger pull with the advantages of shorter over-travel and more detectable trigger reset. All of the components work together to provide a pull weight within the acceptable range for a top end, service pistol. The kit itself is engineered to be drop-in and should not require further gunsmithing. However, armorer or gunsmith installation of the USB into the Shield slide is strongly recommended**. Fits Smith & Wesson Shield in 9mm and .40 S&W. Parts Included: Fully machined Sear Ultimate Striker Block Kit Ultimate Striker Block Striker Block Spring Talon Tactical tool Shield Carry Spring Set Sear Spring (1/8") Slave Pin (to assist with trigger return spring installation) 4 lb Rated Trigger Return Spring

Mer...

Shield Action Enhancement Trigger Kit erstatter direkte den fabrikkmonterte hengslede avtrekkeren med en solid aluminiumsavtrekkerkropp. Avtrekkeren reduserer forhåndsreise og overreise for avtrekkeren med omtrent 20 %. Den har en flat front med en sentrert montert sikkerhetsmekanisme. Den sentrert monterte sikkerhetsmekanismen forhindrer utilsiktet bruk ved å skape en avtrekkersperre som ikke vil løsne med mindre skytteren plasserer fingeren direkte på avtrekkerens front. Den flate, glatte avtrekkeren får skytteren til å plassere fingeren på avtrekkerens midtlinje og oppmuntrer til manipulering av avtrekkeren direkte i linje med boreaksen. Shield Action Enhancement Trigger er perfekt for bruk med M&P Shield som allerede er utstyrt med Apex Shield Carry Kit. Dette kittet er en kombinasjon av Shield Duty/Carry Action Enhancement Kit og Shield Action Enhancement Trigger. APEX Shield Carry Kit Kit (SCK) ble designet for å gi M&P Shield pistol eieren en jevn, konsistent avtrekker på 5 - 5,5 lb med fordelene av kortere overreise og mer merkbar avtrekker tilbakestilling. Alle komponentene arbeider sammen for å gi en avtrekkervekt innenfor det akseptable området for en topp end, tjenestepistol. Kittet i seg selv er konstruert for å være drop-in og bør ikke kreve ytterligere børsemakerarbeid. Imidlertid anbefales det på det sterkeste at en børsemaker eller våpensmed installerer USB-en i Shield sleiden**. Passer Smith & Wesson Shield i 9mm og .40 S&W. Deler inkludert: Fullstendig bearbeidet Sear Ultimate Striker Block Kit Ultimate Striker Block Striker Block Spring Talon Tactical verktøy Shield Carry Spring Set Sear Spring (1/8") Slave Pin (for å assistere med installasjon av avtrekker returfjær) 4 lb Rated Trigger Return Spring

Mer...

Kundevurderinger for APEX TACTICAL SPECIALTIES INC S&W SHIELD ACTION ENHNCMNT TRIGGER & DUTY/CARRY KIT-PURPLE

Antall vurderinger: 10
Fra brownells.com: 10
Gjennomsnittsvurdering: 4,8

very nice (03.07.2014)

This has made all the difference with my satisfaction with my Shield 9mm. I struggled to say the least with the gritty long travel of the factory trigger and this solves all the issues. Some may find the installation difficult but it is worth it. Be patient and watch the youtube videos.

Great Trigger Kit (08.05.2016)

This trigger is way more smooth than the trigger that came on the M&P Shield. I can't understand why they use that horrible cheap trigger on such a great gun!!

Decent, need to include a steel trigger (05.01.2013)

Found a video on Youtube and the install was pretty easy. I was looking to take some of the lbs off of trigger and I think that has been accomplished. I don't have a trigger scale, but can notice a difference in the pull. On a larger note, the trigger reset has definetly been reduced to just under 1/8th of an inch. The only thing that I don't like about the shield is the 2 stage plastic trigger, and would have preferred this kit to include a 1 piece steel trigger as the full size M&P kits do. On a side note, I intend to use this as a carry gun, and since the safety has to be removed from the sear housing to install the new sear, I just left the safety off. Everything functions just fine so far. Overall fairly easy to install and I am satisfied with the results.

Shield Carry Kit (30.03.2013)

Never liked M&P pistols due to the trigger. The Shield offered an improvement over those, but was still not quite there. The Apex Kit put the Shield right in the sweet spot with feel, break, and reset. Along with the XS Big Dot sights I installed at the same time, this makes this little gun a serious fighting firearm and not just a last ditch back up! The first set I ordered went on the Wife's daily carry Shield. First outing at the range I dumped a mag at 10 yards fast enough that it stopped the civilian range I was on. Then at the "apex" of the silence my Wife exclaimed, "wow, all in the 10 ring!" We left due to all the questions after she got ample trigger time and shot well herself. What a great kit.

Makes a good trigger even better (23.05.2013)

I'll admit that my utter lack of mechanical aptitude made me nervous about installing this trigger, but the fact is, if you have the right tools (Worklight, punches, polymer hammer, heat gun, allen wrenches), it installs in less than an hour. It dropped the trigger weight on my 9mm Shield from 8.5 lbs to less than 5, and it's now got a HECK of a reset. Buy it, you won't regret it.

Should have done it sooner (16.02.2014)

Had this installed and it is a huge difference. Before I had a stiff tough trigger pull, now it is nice and smooth. Nice audible reset. Was considering selling my 40 shield because it was so difficult to shoot, now I have a keeper.

GREAT UPGRADE! (20.02.2014)

With the help of a YouTube video I installed this very easily in my shield. Be aware you DO need to remove and re-install the rear sight to install the complete kit! The factory trigger return spring is softer than the Apex one so I left it alone, which gave me a lighter trigger pull than with the stronger Apex trigger return spring!

S&W Shield Duty/Carry Enhancement Kit (18.08.2014)

Everything in the kit works. The YouTube video is excellent as you can go step by step with the video as you install the product. One major problem is not with the kit but with the rear sight removal. Kevin from Arizona mentions, as a tool to assemble, a heat gun. Applying heat to the rear sight could cause problems. The washer under the rear sight might be stainless steel or it may be polymer. According to the package on Red Loctite, it takes 300 degrees to dislodge. Then there is what the rear sight is made of as one of Brownell's expert mentioned with the use of heat. Now go to the MGW Semi-auto Sight Mover. The instructions say not to use this to remove original factory sights. One of Brownell's experts suggested using the Meprolight Universal Sight Installation Tool. Most shooters find this too much of a price ($679.99) to pay for a possible one-time installation. Someone needs to address this issue as it will make sales of this product skyrocket. Especially as people are looking for a powerful and compact pistol which this pistol is and that this product makes even better.

Shield Carry Kit (11.03.2016)

Excellent addition to the S&W Shield. Easy to install after watching the Apex Tactical video on their website or U-Tube.

Removing the rear sight for the USB & spring is the only downfall, but this is easy if you do it right. Anyone can do it. Forget the heat gun, freezing the slide, or sight pusher. The sight pusher will not work for this job (Usually). Remember what your Dad told you? Use the right tool for the job. I used Kroil on the sights overnight while I got the proper tools ready. A good vice with jaw protectors. I C clamped it to a table. Also a piece of duct tape on the sides of the slide or jaw protectors for added protection. Put the slide in the vice with the sights just above the jaws and not past the end of the jaws. Snug it up in the vice. Snug but not too tight. Now you are going to doubt me, but lets continue. I used a cold chisle slightly narrower than the dovetail. Square up the end with a file and cover with masking tape. Carefully line it up on the ledge of the sight and drive it out. I used a ball peen 8oz. hammer. No scratches. no dents, no dings. Drive it out left to right just like the video and put it back in left to right, also like the video. I did this twice because I decided to use the factory spring rather than the kit spring. No damage at all. As with a previous reviewer, I also elected to leave the factory trigger return spring installed. This is a great trigger.

Excellent Upgrade (19.03.2016)

I installed the apex duty/carry kit in both mine and my wifeâs S&W 9mm Shields. One of the kits had the wrong sear. A call to customer service resolved the problem. They have excellent customer service and they promptly shipped the correct one to me. Since this was a new problem for them I took some pictures and provided some measurements. It seemed to be an error in packaging as the other kit was correct.

The kit provided a lighter smoother trigger pull and the reset is excellent. I used a flat thick punch which was in my wheeler gun tools. The blade was almost the width of the rear sight dove tail. I covered the tip with vinyl tape. The sight was very tight but several level blows did the job.

Since I had the rear sight off, I replaced the front sights as well with Ameriglo tritium dot over dot sights for faster target acquisition.

With the new sights and a smoother lighter trigger pull (a little less than 5 pounds) I find that I am able to accurately hit the target and then reacquire the target for faster follow up shots due to the wonderful reset.

The full size S&W M&Ps are our duty weapons and we also have two M&P 40Cs. I have installed the duty/carry kit in all of them. The kits are excellent in these weapons but the kits in the Shield do not seem to function as well as they do but they are different weapons. With that said, there is enough improvement in the Shieldâs operation to make the Apex duty/carry kit for the M&P Shield worth the money.

Les 10 flere anmeldelser fra brownells.com

2149 3499 3 NOK

Produktnr.: 100023497
APEX TACTICAL SPECIALTIES INC S&W SHIELD ACTION ENHNCMNT TRIGGER & DUTY/CARRY KIT-PURPLE
Produsentnr.: 100-136 854263007036 Shield Action Enhancement Trigger Kit erstatter direkte den fabrikkmonterte hengslede avtrekkeren med en solid aluminiumsavtrekkerkropp. Avtrekkeren reduserer forhåndsreise og overreise for avtrekkeren med omtrent 20 %. Den har en flat front med en sentrert montert sikkerhetsmekanisme. Den sentrert monterte sikkerhetsmekanismen forhindrer utilsiktet bruk ved å skape en avtrekkersperre som ikke vil løsne med mindre skytteren plasserer fingeren direkte på avtrekkerens front. Den flate, glatte avtrekkeren får skytteren til å plassere fingeren på avtrekkerens midtlinje og oppmuntrer til manipulering av avtrekkeren direkte i linje med boreaksen. Shield Action Enhancement Trigger er perfekt for bruk med M&P Shield som allerede er utstyrt med Apex Shield Carry Kit. Dette kittet er en kombinasjon av Shield Duty/Carry Action Enhancement Kit og Shield Action Enhancement Trigger. APEX Shield Carry Kit Kit (SCK) ble designet for å gi M&P Shield pistol eieren en jevn, konsistent avtrekker på 5 - 5,5 lb med fordelene av kortere overreise og mer merkbar avtrekker tilbakestilling. Alle komponentene arbeider sammen for å gi en avtrekkervekt innenfor det akseptable området for en topp end, tjenestepistol. Kittet i seg selv er konstruert for å være drop-in og bør ikke kreve ytterligere børsemakerarbeid. Imidlertid anbefales det på det sterkeste at en børsemaker eller våpensmed installerer USB-en i Shield sleiden**. Passer Smith & Wesson Shield i 9mm og .40 S&W. Deler inkludert: Fullstendig bearbeidet Sear Ultimate Striker Block Kit Ultimate Striker Block Striker Block Spring Talon Tactical verktøy Shield Carry Spring Set Sear Spring (1/8") Slave Pin (for å assistere med installasjon av avtrekker returfjær) 4 lb Rated Trigger Return Spring

3499 NOK 12 kr 3 499,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Finish: Purple Make: Smith & Wesson Modell: M&P Shield Style: Competition, Enhanced

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Shield Action Enhancement Trigger Kit erstatter fabrikkmontert avtrekker og reduserer forhåndsreise og overreise med omtrent 20 %.
Kittet inkluderer en flat, glatt avtrekker med sentrert sikkerhetsmekanisme for å forhindre utilsiktet bruk og forbedre nøyaktigheten.
Passer Smith & Wesson Shield i 9mm og .40 S&W, og gir en jevn, konsistent avtrekker på 5 - 5,5 lb uten behov for ytterligere børsemakerarbeid.

Attributes

Finish: Purple Make: Smith & Wesson Modell: M&P Shield Style: Competition,Enhanced Leveringsvekt: 0,025kg Frakthøyde: 29mm Fraktbredde: 98mm Fraktlengde: 98mm UPC : 854263007036

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.c

Produktnr.: 100010772
APEX TACTICAL SPECIALTIES INC SHIELD CARRY KIT
Produsentnr.: 100-076 856008005222 Shield Action Enhancement Trigger Kit erstatter direkte den fabrikkmonterte hengslede avtrekkeren med en solid aluminiumsavtrekkerkropp. Avtrekkeren reduserer forhåndsreise og overreise for avtrekkeren med omtrent 20 %. Den har en flat front med en sentrert montert sikkerhetsmekanisme. Den sentrert monterte sikkerhetsmekanismen forhindrer utilsiktet bruk ved å skape en avtrekkersperre som ikke vil løsne med mindre skytteren plasserer fingeren direkte på avtrekkerens front. Den flate, glatte avtrekkeren får skytteren til å plassere fingeren på avtrekkerens midtlinje og oppmuntrer til manipulering av avtrekkeren direkte i linje med boreaksen. Shield Action Enhancement Trigger er perfekt for bruk med M&P Shield som allerede er utstyrt med Apex Shield Carry Kit. Dette kittet er en kombinasjon av Shield Duty/Carry Action Enhancement Kit og Shield Action Enhancement Trigger. APEX Shield Carry Kit Kit (SCK) ble designet for å gi M&P Shield pistol eieren en jevn, konsistent avtrekker på 5 - 5,5 lb med fordelene av kortere overreise og mer merkbar avtrekker tilbakestilling. Alle komponentene arbeider sammen for å gi en avtrekkervekt innenfor det akseptable området for en topp end, tjenestepistol. Kittet i seg selv er konstruert for å være drop-in og bør ikke kreve ytterligere børsemakerarbeid. Imidlertid anbefales det på det sterkeste at en børsemaker eller våpensmed installerer USB-en i Shield sleiden**. Passer Smith & Wesson Shield i 9mm og .40 S&W. Deler inkludert: Fullstendig bearbeidet Sear Ultimate Striker Block Kit Ultimate Striker Block Striker Block Spring Talon Tactical verktøy Shield Carry Spring Set Sear Spring (1/8") Slave Pin (for å assistere med installasjon av avtrekker returfjær) 4 lb Rated Trigger Return Spring

2149 NOK 10 kr 2 149,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Finish: Black Make: Smith & Wesson Modell: M&P Shield Style: Enhanced

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Produktnr.: 100014181
APEX TACTICAL SPECIALTIES INC S&W SHIELD ACTION ENHNCMNT TRIGGER & DUTY/CARRY KIT-BLACK
Produsentnr.: 100-051 856008005062 Shield Action Enhancement Trigger Kit erstatter direkte den fabrikkmonterte hengslede avtrekkeren med en solid aluminiumsavtrekkerkropp. Avtrekkeren reduserer forhåndsreise og overreise for avtrekkeren med omtrent 20 %. Den har en flat front med en sentrert montert sikkerhetsmekanisme. Den sentrert monterte sikkerhetsmekanismen forhindrer utilsiktet bruk ved å skape en avtrekkersperre som ikke vil løsne med mindre skytteren plasserer fingeren direkte på avtrekkerens front. Den flate, glatte avtrekkeren får skytteren til å plassere fingeren på avtrekkerens midtlinje og oppmuntrer til manipulering av avtrekkeren direkte i linje med boreaksen. Shield Action Enhancement Trigger er perfekt for bruk med M&P Shield som allerede er utstyrt med Apex Shield Carry Kit. Dette kittet er en kombinasjon av Shield Duty/Carry Action Enhancement Kit og Shield Action Enhancement Trigger. APEX Shield Carry Kit Kit (SCK) ble designet for å gi M&P Shield pistol eieren en jevn, konsistent avtrekker på 5 - 5,5 lb med fordelene av kortere overreise og mer merkbar avtrekker tilbakestilling. Alle komponentene arbeider sammen for å gi en avtrekkervekt innenfor det akseptable området for en topp end, tjenestepistol. Kittet i seg selv er konstruert for å være drop-in og bør ikke kreve ytterligere børsemakerarbeid. Imidlertid anbefales det på det sterkeste at en børsemaker eller våpensmed installerer USB-en i Shield sleiden**. Passer Smith & Wesson Shield i 9mm og .40 S&W. Deler inkludert: Fullstendig bearbeidet Sear Ultimate Striker Block Kit Ultimate Striker Block Striker Block Spring Talon Tactical verktøy Shield Carry Spring Set Sear Spring (1/8") Slave Pin (for å assistere med installasjon av avtrekker returfjær) 4 lb Rated Trigger Return Spring

3399 NOK 9 kr 3 399,00 *

Leveringstid ca. 14-21 dager.
9 stk. på lageret i USA

Spesifikasjoner: Finish: Black Make: Smith & Wesson Modell: M&P, M&P Shield Style: Enhanced

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Oppgrader din M&P Shield med S&W Shield Action Enhancement Trigger Kit! 🎯 Få en jevn avtrekker med kortere overreise og bedre kontroll.

Mer...

Kundevurderinger for APEX TACTICAL SPECIALTIES INC S&W SHIELD ACTION ENHNCMNT TRIGGER & DUTY/CARRY KIT-PURPLE

Antall vurderinger: 10
Fra brownells.com: 10
Gjennomsnittsvurdering: 4,8

very nice (03.07.2014)

Great Trigger Kit (08.05.2016)

This trigger is way more smooth than the trigger that came on the M&P Shield. I can't understand why they use that horrible cheap trigger on such a great gun!!

Decent, need to include a steel trigger (05.01.2013)