SINCLAIR INTERNATIONAL
SINCLAIR FLASHHOLE REAMERS

749005418

These tools are designed to ream flash holes to specific diameters rather than debur. The handloader addresses three issues when using this tool. 1) It enlarges the holes just enough for the die maker's decapping pins to go through without getting stuck. 2) It removes any burrs left in the flash hole during manufacturing. 3) Each flash hole will be exactly the same size ensuring uniform ignition. This three-piece tools have a stainless steel guide that centers the reamer in the primer pocket, a knurled stainless steel handle and either a .0625” or .081” reamer for small or standard flash holes.

Mer...

Disse verktøyene er designet for å utvide tennhull til spesifikke diametre, snarere enn å fjerne grader. Når man bruker dette verktøyet, adresserer hjemmeladeren tre problemer. 1) Det utvider hullene akkurat nok til at stansens nåler fra dørprodusenten kan gå gjennom uten å sette seg fast. 2) Det fjerner eventuelle grader igjen i tennhullet under produksjonen. 3) Hvert tennhull vil være nøyaktig samme størrelse, noe som sikrer ensartet tenning. Dette tredelte verktøyet har en rustfri stålguide som sentrerer reameren i tennhetten, et riflet rustfritt stålhåndtak og enten en .0625” eller .081” reamer for små eller standard tennhull.

Mer...

Kundevurderinger for SINCLAIR INTERNATIONAL 0.0625" FLASHHOLE REAMER

Antall vurderinger: 4
Fra brownells.com: 4
Gjennomsnittsvurdering: 3,8

REAMING PIN COMES OUT PERMANENTLY (27.09.2014)

I encountered quite a number of WCC and Winchester once-fired brass with so small flashholes that the decapping pin of my resizing die would get caught in them and even get pulled out. To solve that problem, I bought this reamer from Sinclair a few weeks ago. I used it as soon as I opened the package. After reaming the flashholes of only 6 cases (yes, only 6 cases), the reaming pin came out of the body. I tried to loosen the allen screw that held the reaming pin in the body, but even the smallest allen wrench available in hardware stores and reloading stores were too big. Even the Sinclair technician I consulted could not tell me where to find a wrench that would fit the screw. I returned the flashhole reamer, declining Sinclair's offer of a replacement with free shipping. I figured that, if the pin comes off again, I would have the same problem. It may be just that reamer that was poorly constructed, but over the long run, the unavailability of a wrench to fix the problem makes the product worthless. Thus, the 1 star. If there was a 0 star, I would have marked it.

Worked perfectly (15.10.2015)

Received reamer and used it on 250 cases initially without a flaw, worked perfectly. Additionally, it make evident several cases in which the primer pockets were not straight. I checked and my gun screwdriver set had an Allen key that fit perfectly should it ever need to be taken apart.

Not a complete function (25.11.2015)

With un-crimped good brass it works well. The existing flash hole needs to be well centered and pretty close to 0.080 for this to work. It's only designed to remove a few thousandths on already decent flash holes. It does have 4 cutting edges with good cleanout grooves for the small size so its hard to clog it and damage the hole but it still doesn't deburr or taper the inside edge. The deburr tool I use almost does this tools job as well but because it cuts to 0.081 it still has a purpose. I would suggest using this reamer first and deburring second to insure clean uniform flash holes. I have used this reamer and my deburring tool on match grade custom brass of every brand and they both still further refined even the most expensive offerings.

Quality, precision (08.07.2014)

The small decapping pins fit tight in the 6BR Lapua brass flash holes and sometimes pull the pin out of the decapping die. This precision tool opens up the flash hole slightly keeping it square to the primer pocket. This should solve the problem.

Les 4 flere anmeldelser fra brownells.com

649 649 2 NOK

Produktnr.: 749005418
SINCLAIR INTERNATIONAL 0.0625" FLASHHOLE REAMER
Produsentnr.: 073000 Disse verktøyene er designet for å utvide tennhull til spesifikke diametre, snarere enn å fjerne grader. Når man bruker dette verktøyet, adresserer hjemmeladeren tre problemer. 1) Det utvider hullene akkurat nok til at stansens nåler fra dørprodusenten kan gå gjennom uten å sette seg fast. 2) Det fjerner eventuelle grader igjen i tennhullet under produksjonen. 3) Hvert tennhull vil være nøyaktig samme størrelse, noe som sikrer ensartet tenning. Dette tredelte verktøyet har en rustfri stålguide som sentrerer reameren i tennhetten, et riflet rustfritt stålhåndtak og enten en .0625” eller .081” reamer for små eller standard tennhull.

Varsle ved tilgjengelighet

Ikke tilgjengelig.

Spesifikasjoner: Kaliber: 264/6.5 mm (.264)

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Verktøyet utvider tennhull til spesifikke diametre, slik at stansens nåler kan passere uten problemer.
Fjerner grader som er igjen i tennhullet fra produksjonen, og sikrer jevn tenning.
Leveres med rustfri stålguide og riflet håndtak, tilgjengelig i .0625” eller .081” for små eller standard tennhull.

Attributes

Kaliber: 264/6.5 mm (.264) Leveringsvekt: 0,045kg Frakthøyde: 10mm Fraktbredde: 13mm Fraktlengde: 64mm

Elementdetaljer

Made in USA

Produktnr.: 749008617
SINCLAIR INTERNATIONAL 0.081" FLASH HOLE REAMER
Produsentnr.: 073081 Disse verktøyene er designet for å utvide tennhull til spesifikke diametre, snarere enn å fjerne grader. Når man bruker dette verktøyet, adresserer hjemmeladeren tre problemer. 1) Det utvider hullene akkurat nok til at stansens nåler fra dørprodusenten kan gå gjennom uten å sette seg fast. 2) Det fjerner eventuelle grader igjen i tennhullet under produksjonen. 3) Hvert tennhull vil være nøyaktig samme størrelse, noe som sikrer ensartet tenning. Dette tredelte verktøyet har en rustfri stålguide som sentrerer reameren i tennhetten, et riflet rustfritt stålhåndtak og enten en .0625” eller .081” reamer for små eller standard tennhull.

649 NOK 5 kr 649,00 *