Reduced Power Tune-Up Pak fits 10/22® in all calibers. Includes an extra power hammer spring, reduced power trigger spring, and reduced power sear spring to improve let-off and reduce trigger pull, perfect for competition. Tune-Up Pak fits all calibers of 10/22®. Includes an extra power hammer spring, extra power trigger spring, and reduced power sear spring for a clean, crisp trigger pull, perfect for hunting. For an even smoother, lighter-feeling trigger pull, install the reduced power (RP) trigger/sear spring. Tune-Up Paks do not include recoil springs.
Mer...
Kits for å Forbedre Funksjonaliteten
Reduced Power Tune-Up Pak passer til 10/22® i alle kalibre. Inkluderer en ekstra kraftig hammerfjær, redusert kraft avtrekkerfjær, og redusert kraft avtrekkerspennfjær for å forbedre avtrekkerfølelsen og redusere avtrekkerkraften, perfekt for konkurranse. Tune-Up Pak passer til alle kalibre av 10/22®. Inkluderer en ekstra kraftig hammerfjær, ekstra kraftig avtrekkerfjær, og redusert kraft avtrekkerspennfjær for en ren, skarp avtrekkerkraft, perfekt for jakt. For en enda glattere og lettere avtrekkerkraft, installer den reduserte kraften (RP) avtrekker/spennfjær. Tune-Up Paks inkluderer ikke rekylfjærer.
Mer...
Kundevurderinger for WOLFF KIT 18075 TUNE-UP PAK
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,3
This is what you want(10.12.2010)
I add this kit to a Power Custom ADJUSTABLE hammer, sear and trigger kit, then shim with LC Shively shims for the very best OEM 10/22 Trigger Group that I can build. trigger pull is usually 2.5 lbs or less with externally adjustable creep and over travel.
Makes a very crisp trigger.(24.09.2011)
I really like the trigger on my 10/22 now. breaks like glass and is kettle cooked chip crisp!
Wise Choice(07.05.2012)
Intalled and fired hundreds of rounds so far. The trigger pull (after a lot of polishing!) isn't even comparable to stock, and no light strikes.
Reduced Power spring kit by Wolff(14.04.2014)
The factory 10/22 trigger on newer rifles are horrible! Purchased this and installed the sear and trigger return springs. Didn't use the increased hammer spring as I've never had issues with light strikes.
Along with polishing the sear engagements with 4000 grit wet dry it breaks like glass. My trusty trigger pull gauge says 3.1 lbs. That's very acceptable for a plinking / hunting rifle.
For those who might be leary about doing this yourself go to YOUTUBE as there are plenty of videos on disassembly of the trigger group.
Reduced power spring kit(16.07.2015)
My stock trigger measure 6 lb 3 oz and after I installed the kit it went down exactly 1 lb. Its not worth the effort. I used a digital trigger gauge. I took the average of 5 pulls.
Comes w/3 springs, 1 is too long.(22.07.2011)
Comes w/xtra pwr. hammer spring,reduced pwr. sear spring, & xtra pwr. trigger spring, which @ full compression is about 1/12" too long. Though, if you slowly, painstakingly shorten the trigger de-tints nose (yeah, putting that assbly. back together 8-10 times really sucks), to use trigger spring, end result is a custom fit trigger stop (yeah!!) or, order the factory Ruger spring Brownells sells separately. For a full trigger job, decrease sear overlap,hone & polish before setting trigger stop. Don't forget a new factory recoil spring/rod assbly. too!
Easy to install(17.01.2012)
Went in easy with no custom fitting required. Only a slight pull increase so i didn't throw my accuracy at the range when shooting free-hand.
Produktnr.: 969180750 WOLFF KIT 18075 TUNE-UP PAK Produsentnr.: 18075 Reduced Power Tune-Up Pak passer til 10/22® i alle kalibre. Inkluderer en ekstra kraftig hammerfjær, redusert kraft avtrekkerfjær, og redusert kraft avtrekkerspennfjær for å forbedre avtrekkerfølelsen og redusere avtrekkerkraften, perfekt for konkurranse. Tune-Up Pak passer til alle kalibre av 10/22®. Inkluderer en ekstra kraftig hammerfjær, ekstra kraftig avtrekkerfjær, og redusert kraft avtrekkerspennfjær for en ren, skarp avtrekkerkraft, perfekt for jakt. For en enda glattere og lettere avtrekkerkraft, installer den reduserte kraften (RP) avtrekker/spennfjær. Tune-Up Paks inkluderer ikke rekylfjærer.
359NOK0kr 359,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Produktnr.: 969000204 WOLFF REDUCED POWER TUNE-UP PAK Produsentnr.: 18076 Reduced Power Tune-Up Pak passer til 10/22® i alle kalibre. Inkluderer en ekstra kraftig hammerfjær, redusert kraft avtrekkerfjær, og redusert kraft avtrekkerspennfjær for å forbedre avtrekkerfølelsen og redusere avtrekkerkraften, perfekt for konkurranse. Tune-Up Pak passer til alle kalibre av 10/22®. Inkluderer en ekstra kraftig hammerfjær, ekstra kraftig avtrekkerfjær, og redusert kraft avtrekkerspennfjær for en ren, skarp avtrekkerkraft, perfekt for jakt. For en enda glattere og lettere avtrekkerkraft, installer den reduserte kraften (RP) avtrekker/spennfjær. Tune-Up Paks inkluderer ikke rekylfjærer.
359NOK16kr 359,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Reduced Power Tune-Up Pak fits 10/22® in all calibers. Includes an extra power hammer spring, reduced power trigger spring, and reduced power sear spring to improve let-off and reduce trigger pull, perfect for competition. Tune-Up Pak fits all calibers of 10/22®. Includes an extra power hammer spring, extra power trigger spring, and reduced power sear spring for a clean, crisp trigger pull, perfect for hunting. For an even smoother, lighter-feeling trigger pull, install the reduced power (RP) trigger/sear spring. Tune-Up Paks do not include recoil springs.
Mer...
Kits for å Forbedre Funksjonaliteten
Reduced Power Tune-Up Pak passer til 10/22® i alle kalibre. Inkluderer en ekstra kraftig hammerfjær, redusert kraft avtrekkerfjær, og redusert kraft avtrekkerspennfjær for å forbedre avtrekkerfølelsen og redusere avtrekkerkraften, perfekt for konkurranse. Tune-Up Pak passer til alle kalibre av 10/22®. Inkluderer en ekstra kraftig hammerfjær, ekstra kraftig avtrekkerfjær, og redusert kraft avtrekkerspennfjær for en ren, skarp avtrekkerkraft, perfekt for jakt. For en enda glattere og lettere avtrekkerkraft, installer den reduserte kraften (RP) avtrekker/spennfjær. Tune-Up Paks inkluderer ikke rekylfjærer.
Mer...
Kundevurderinger for WOLFF KIT 18075 TUNE-UP PAK
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,3
This is what you want(10.12.2010)
I add this kit to a Power Custom ADJUSTABLE hammer, sear and trigger kit, then shim with LC Shively shims for the very best OEM 10/22 Trigger Group that I can build. trigger pull is usually 2.5 lbs or less with externally adjustable creep and over travel.
Makes a very crisp trigger.(24.09.2011)
I really like the trigger on my 10/22 now. breaks like glass and is kettle cooked chip crisp!
Wise Choice(07.05.2012)
Intalled and fired hundreds of rounds so far. The trigger pull (after a lot of polishing!) isn't even comparable to stock, and no light strikes.
Reduced Power spring kit by Wolff(14.04.2014)
The factory 10/22 trigger on newer rifles are horrible! Purchased this and installed the sear and trigger return springs. Didn't use the increased hammer spring as I've never had issues with light strikes.
Along with polishing the sear engagements with 4000 grit wet dry it breaks like glass. My trusty trigger pull gauge says 3.1 lbs. That's very acceptable for a plinking / hunting rifle.
For those who might be leary about doing this yourself go to YOUTUBE as there are plenty of videos on disassembly of the trigger group.
Reduced power spring kit(16.07.2015)
My stock trigger measure 6 lb 3 oz and after I installed the kit it went down exactly 1 lb. Its not worth the effort. I used a digital trigger gauge. I took the average of 5 pulls.
Comes w/3 springs, 1 is too long.(22.07.2011)
Comes w/xtra pwr. hammer spring,reduced pwr. sear spring, & xtra pwr. trigger spring, which @ full compression is about 1/12" too long. Though, if you slowly, painstakingly shorten the trigger de-tints nose (yeah, putting that assbly. back together 8-10 times really sucks), to use trigger spring, end result is a custom fit trigger stop (yeah!!) or, order the factory Ruger spring Brownells sells separately. For a full trigger job, decrease sear overlap,hone & polish before setting trigger stop. Don't forget a new factory recoil spring/rod assbly. too!
Easy to install(17.01.2012)
Went in easy with no custom fitting required. Only a slight pull increase so i didn't throw my accuracy at the range when shooting free-hand.