Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

POWER CUSTOM
RUGER® 10/22® BOLT BUFFER

713000100

Reduces Receiver Battering & Cushions Felt Recoil

Tough polyurethane cylinder replaces the factory steel bolt stop pin to cushion metal-to-metal impact and reduce receiver wear. Shock-absorbing qualities help reduce felt recoil and receiver stress, while eliminating the annoying “clunk” sound of the bolt cycling. Easy installation instructions included. Color may vary from the manufacturer.

SPECS: Polyurethane, Approx. 1¼” (3.2cm) long, ¼” (6.35mm) diameter.

Mer...

Reduserer Slitasje på Mottakeren & Demping av Følt Rekyl

Tøff polyuretansylinder erstatter den fabrikkmonterte stålboltestoppinnen for å dempe metall-til-metall-impact og redusere slitasje på mottakeren. Støtabsorberende egenskaper hjelper med å redusere følt rekyl og stress på mottakeren, samtidig som den irriterende “klonk”-lyden når bolten sykler elimineres. Enkle installasjonsinstruksjoner inkludert. Fargen kan variere fra produsenten.

SPECS: Polyuretan, ca. 1¼” (3,2 cm) lang, ¼” (6,35 mm) diameter.

Mer...

Kundevurderinger for POWER CUSTOM 10/22® BOLT BUFFER

Antall vurderinger: 5
Fra brownells.com: 5
Gjennomsnittsvurdering: 3,4

good product (18.06.2011)

reduces clank of receiver, easy to install

Like it! (22.08.2011)

No issues so far. Gun functions normally, installation/removal is more difficult than the stock steel pin, but not unreasonable so. I used a knife to taper one end so it would start easier. I have installed on all my 10/22's and will install one on all future 10/22's.

Easy Protection (19.10.2011)

Tight fit into the reciever, so don't have to worry about movement. I don't notice a feel in recoil or action, but it's in a 10/22 (a smooth operating, light recoiling gun). It nearly eliminated the clang from the bolt impacting the factory pin. This product is very durable and has taken thousands of rounds without showing wear.

I recommend for the cheap insurance and peace of mind.

Absolute garbage (08.06.2012)

If I could give it 0 stars, I would. Doesn't fit, had to trim one end. Do yourself a favor and buy the KIDD bolt buffer, that's what I'm doing at half the price.

Disapointed (04.04.2013)

I was very interested in what this product had to offer. Installed it and immediately had problems with the rifle cycling. It wouldn't pick up the next round. I took the rifle apart at the range to see if I had installed it wrong but since there is only one way it goes in that was not the case. Installed the factory steel pin and had zero failures. I feel this is a gimick for a problem that doesn't really exist. It would be nice to quiet the noise but I'm not going to sacrifice the reliability the 10/22 has.

Les 5 flere anmeldelser fra brownells.com

389 389 1 NOK

Produktnr.: 713000100
POWER CUSTOM 10/22® BOLT BUFFER
Produsentnr.: BJB 10-22 Tøff polyuretansylinder erstatter den fabrikkmonterte stålboltestoppinnen for å dempe metall-til-metall-impact og redusere slitasje på mottakeren. Støtabsorberende egenskaper hjelper med å redusere følt rekyl og stress på mottakeren, samtidig som den irriterende “klonk”-lyden når bolten sykler elimineres. Enkle installasjonsinstruksjoner inkludert. Fargen kan variere fra produsenten.

389 NOK 1 kr 389,00 *

Leveringstid ca. 14-21 dager.
1 stk. på lageret i USA

Spesifikasjoner: Make: Ruger Modell: 10/22

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Polyuretansylinder erstatter fabrikkmontert stålboltestoppinne for å dempe metall-til-metall-impact og redusere slitasje.
Reduserer følt rekyl og stress på mottakeren, samtidig som den eliminerer “klonk”-lyden når bolten sykler.
Enkle installasjonsinstruksjoner inkludert; fargen kan variere fra produsenten.

Attributes

Make: Ruger Modell: 10/22 Leveringsvekt: 0,045kg Fraktbredde: 57mm Fraktlengde: 89mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Oppgrader din RUGER® 10/22® med POWER CUSTOMs boltbuffer! 🛠️ Reduser rekyl og slitasje med enkel installasjon.

Reduces Receiver Battering & Cushions Felt Recoil

SPECS: Polyurethane, Approx. 1¼” (3.2cm) long, ¼” (6.35mm) diameter.

Mer...

Reduserer Slitasje på Mottakeren & Demping av Følt Rekyl

SPECS: Polyuretan, ca. 1¼” (3,2 cm) lang, ¼” (6,35 mm) diameter.

Mer...

Kundevurderinger for POWER CUSTOM 10/22® BOLT BUFFER

Antall vurderinger: 5
Fra brownells.com: 5
Gjennomsnittsvurdering: 3,4

good product (18.06.2011)

reduces clank of receiver, easy to install

Like it! (22.08.2011)

Easy Protection (19.10.2011)

Absolute garbage (08.06.2012)

If I could give it 0 stars, I would. Doesn't fit, had to trim one end. Do yourself a favor and buy the KIDD bolt buffer, that's what I'm doing at half the price.

Disapointed (04.04.2013)

Les 5 flere anmeldelser fra brownells.com