Durable Stock With Outstanding Grip Characteristics; Rubber-Coated Finish Grips Great, With Or Without Gloves
Fiberglass-reinforced, polymer, shotgun stock provides synthetic-stock durability and is overmolded with rubber for a sure grip every time you grab your gun. Rubber is pebble-textured in the gripping areas. Includes recoil-cushioning, butt pad and an integral, sling-swivel stud. Available in standard, factory length of pull or in ShortShot, 12" length of pull for use with body armor or for smaller shooters.
SPECS: Polymer stock; rubber overmolded, black, matte finish. Standard stocks match factory dimensions and length of pull. Stock sets and components fit 12 gauge only. ShortShot stocks have a 12" length of pull.
Mer...
Holdbar kolbe med enestående grepsegenskaper; Gummi-belagt finish gir utmerket grep, med eller uten hansker
Forsterket med glassfiber, polymerskuddvåpenkolbe som gir holdbarheten til en syntetisk kolbe og er overmoldet med gummi for et sikkert grep hver gang du tar tak i våpenet ditt. Gummi er kornet-teksturert i grepsområdene. Inkluderer rekyl-dempende kolbekappe og integrert remfeste. Tilgjengelig i standard, fabrikkens lengde på avtrekket eller i ShortShot, 12" lengde på avtrekket for bruk med kroppspanser eller for mindre skyttere.
SPECS: Polymerskaft; gummi overmoldet, svart, matt finish. Standard skafter matcher fabrikkens dimensjoner og lengde på avtrekket. Skafter og komponenter passer kun til 12 kaliber. ShortShot skafter har en 12" lengde på avtrekket.
Mer...
Kundevurderinger for HOGUE REMINGTON 870 12 GAUGE SHORTSHOT BUTTSTOCK
Antall vurderinger: 4
Fra brownells.com: 4
Gjennomsnittsvurdering: 3
fits 20ga too!(26.02.2010)
Although it says it's for 12ga only, this stock fit my daughter's 20ga 500 just perfect (my daughter outgrew the "bantam" stock on her gun). The Hogue website's "knowledge base" said that this buttstock was interchangable between 12 thru .410, so I took a shot... no other synthetic stock maker claimed their product fit a 20ga. Hogue's fore-ends, however, fit 12ga ONLY. If you're looking for a nice lightweight & tough as nails buttstock for a 20ga 500, this is it. Easy installation, perfect fit.
Good for the price(10.06.2012)
For the price point you can't beat it. The overmolded grip at the pistol grip of the stock feels good as well as the overall LOP. Installation was quick and easy but be aware it does not come with a stock bolt. However the mossberg OEM stock bolt worked just fine. Make sure you have a long flat head screw driver for installation. Also use the bolt washer that comes with the stock as the Mossberg factory washer is to small. Some things I did not like. Compared to the factory stock ( I replaced the short LOP one it came with), this one seemed as though it was thinner walled and not as rigid. Still solid but I would have liked it heavier. Also the stock did not fit tight against the receiver. This is a personal preference, because although its on there solid and isn't moving anywhere, there is an ever so slight gap. Last, the buttpad is soft but I don't feel it will hold up to serious use. I guess time will tell. Overall happy with the purchase and a nice match with the Hogue forend.
No screw(24.05.2013)
I bought this one and was deeply disapointed. It does not include a mounting screw and standard one does not work.
I have a cruiser model with a pistol grip that has a short screw that could not come even close to what this stock requires for installation.
There is no replacement screw included in the package, just a useless washer that does not fit anything.
For comparision I also purchased a collapsable stock from blackhawk and it did have a replacement screw provided of the right size.
Also keep in mind that this stock needs a very long (at least foot long) alen wrench. I bet most of people do not have it in household. Again hague did not provide it, but blackhawk did (unfortunatly not long enough to work with this stock).
Instruction is poorly written with some orphographic typos. For example in one place bolt is called bolD. It does not metter but shows attention to the details.
This product is made in Mexico not in United States.
Overall, I do not know what to do with this item. May be send it back to brownels or just look somewhere for a long screw and try to fix it in place as returns can be a hassle.
Not quite what I expected(13.04.2012)
Mounted on a 12ga 500 with pistol grip only.
Stock feels good. The rubberized coating on the pistol grip does not extend to the rest of the stock. It has the synthetic matte plastic finish.
You MUST disassemble the receiver to install this stock. This stock did not come with a bolt to fasten it to the receiver, and the old bolt was not long enough. A trip to the hardware store for a 5/16-18 allen bolt was needed. I returned with a 2 1/2 in bolt that was too long and broke the safety tab on the back of the trigger. You will have to find a new bolt and cut to size AFTER you tear down the receiver. That is only for your application if you have a Cruiser-type shot gun. I am replacing my trigger through Brownells as well.
Mossberg customer service knew immediately how I had broken the trigger, and stated it would not be covered under warranty. Further they explained that the trigger was a restricted item and could not be shipped to me if I was not a gunsmith. Brownell's part was cheaper anyway.
Produktnr.: 408000063 HOGUE REMINGTON 870 12 GAUGE SHORTSHOT BUTTSTOCK Produsentnr.: 08730743108087305 Forsterket med glassfiber, polymerskuddvåpenkolbe som gir holdbarheten til en syntetisk kolbe og er overmoldet med gummi for et sikkert grep hver gang du tar tak i våpenet ditt. Gummi er kornet-teksturert i grepsområdene. Inkluderer rekyl-dempende kolbekappe og integrert remfeste. Tilgjengelig i standard, fabrikkens lengde på avtrekket eller i ShortShot, 12" lengde på avtrekket for bruk med kroppspanser eller for mindre skyttere.
1449NOK1kr 1 449,00
*
Leveringstid ca. 14-21 dager. 1 stk. på lageret i USA
Produktnr.: 408000061 HOGUE MOSSBERG 500 12 GAUGE BUTTSTOCK Produsentnr.: 05010743108050101 Forsterket med glassfiber, polymerskuddvåpenkolbe som gir holdbarheten til en syntetisk kolbe og er overmoldet med gummi for et sikkert grep hver gang du tar tak i våpenet ditt. Gummi er kornet-teksturert i grepsområdene. Inkluderer rekyl-dempende kolbekappe og integrert remfeste. Tilgjengelig i standard, fabrikkens lengde på avtrekket eller i ShortShot, 12" lengde på avtrekket for bruk med kroppspanser eller for mindre skyttere.
1299NOK2kr 1 299,00
*
Leveringstid ca. 14-21 dager. 2 stk. på lageret i USA
Produktnr.: 408000058 HOGUE REMINGTON 870 12 GAUGE BUTTSTOCK Produsentnr.: 08710743108087107 Forsterket med glassfiber, polymerskuddvåpenkolbe som gir holdbarheten til en syntetisk kolbe og er overmoldet med gummi for et sikkert grep hver gang du tar tak i våpenet ditt. Gummi er kornet-teksturert i grepsområdene. Inkluderer rekyl-dempende kolbekappe og integrert remfeste. Tilgjengelig i standard, fabrikkens lengde på avtrekket eller i ShortShot, 12" lengde på avtrekket for bruk med kroppspanser eller for mindre skyttere.
1349NOK0kr 1 349,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Durable Stock With Outstanding Grip Characteristics; Rubber-Coated Finish Grips Great, With Or Without Gloves
Fiberglass-reinforced, polymer, shotgun stock provides synthetic-stock durability and is overmolded with rubber for a sure grip every time you grab your gun. Rubber is pebble-textured in the gripping areas. Includes recoil-cushioning, butt pad and an integral, sling-swivel stud. Available in standard, factory length of pull or in ShortShot, 12" length of pull for use with body armor or for smaller shooters.
SPECS: Polymer stock; rubber overmolded, black, matte finish. Standard stocks match factory dimensions and length of pull. Stock sets and components fit 12 gauge only. ShortShot stocks have a 12" length of pull.
Mer...
Holdbar kolbe med enestående grepsegenskaper; Gummi-belagt finish gir utmerket grep, med eller uten hansker
Forsterket med glassfiber, polymerskuddvåpenkolbe som gir holdbarheten til en syntetisk kolbe og er overmoldet med gummi for et sikkert grep hver gang du tar tak i våpenet ditt. Gummi er kornet-teksturert i grepsområdene. Inkluderer rekyl-dempende kolbekappe og integrert remfeste. Tilgjengelig i standard, fabrikkens lengde på avtrekket eller i ShortShot, 12" lengde på avtrekket for bruk med kroppspanser eller for mindre skyttere.
SPECS: Polymerskaft; gummi overmoldet, svart, matt finish. Standard skafter matcher fabrikkens dimensjoner og lengde på avtrekket. Skafter og komponenter passer kun til 12 kaliber. ShortShot skafter har en 12" lengde på avtrekket.
Mer...
Kundevurderinger for HOGUE REMINGTON 870 12 GAUGE SHORTSHOT BUTTSTOCK
Antall vurderinger: 4
Fra brownells.com: 4
Gjennomsnittsvurdering: 3
fits 20ga too!(26.02.2010)
Although it says it's for 12ga only, this stock fit my daughter's 20ga 500 just perfect (my daughter outgrew the "bantam" stock on her gun). The Hogue website's "knowledge base" said that this buttstock was interchangable between 12 thru .410, so I took a shot... no other synthetic stock maker claimed their product fit a 20ga. Hogue's fore-ends, however, fit 12ga ONLY. If you're looking for a nice lightweight & tough as nails buttstock for a 20ga 500, this is it. Easy installation, perfect fit.
Good for the price(10.06.2012)
For the price point you can't beat it. The overmolded grip at the pistol grip of the stock feels good as well as the overall LOP. Installation was quick and easy but be aware it does not come with a stock bolt. However the mossberg OEM stock bolt worked just fine. Make sure you have a long flat head screw driver for installation. Also use the bolt washer that comes with the stock as the Mossberg factory washer is to small. Some things I did not like. Compared to the factory stock ( I replaced the short LOP one it came with), this one seemed as though it was thinner walled and not as rigid. Still solid but I would have liked it heavier. Also the stock did not fit tight against the receiver. This is a personal preference, because although its on there solid and isn't moving anywhere, there is an ever so slight gap. Last, the buttpad is soft but I don't feel it will hold up to serious use. I guess time will tell. Overall happy with the purchase and a nice match with the Hogue forend.
No screw(24.05.2013)
I bought this one and was deeply disapointed. It does not include a mounting screw and standard one does not work.
I have a cruiser model with a pistol grip that has a short screw that could not come even close to what this stock requires for installation.
There is no replacement screw included in the package, just a useless washer that does not fit anything.
For comparision I also purchased a collapsable stock from blackhawk and it did have a replacement screw provided of the right size.
Also keep in mind that this stock needs a very long (at least foot long) alen wrench. I bet most of people do not have it in household. Again hague did not provide it, but blackhawk did (unfortunatly not long enough to work with this stock).
Instruction is poorly written with some orphographic typos. For example in one place bolt is called bolD. It does not metter but shows attention to the details.
This product is made in Mexico not in United States.
Overall, I do not know what to do with this item. May be send it back to brownels or just look somewhere for a long screw and try to fix it in place as returns can be a hassle.
Not quite what I expected(13.04.2012)
Mounted on a 12ga 500 with pistol grip only.
Stock feels good. The rubberized coating on the pistol grip does not extend to the rest of the stock. It has the synthetic matte plastic finish.
You MUST disassemble the receiver to install this stock. This stock did not come with a bolt to fasten it to the receiver, and the old bolt was not long enough. A trip to the hardware store for a 5/16-18 allen bolt was needed. I returned with a 2 1/2 in bolt that was too long and broke the safety tab on the back of the trigger. You will have to find a new bolt and cut to size AFTER you tear down the receiver. That is only for your application if you have a Cruiser-type shot gun. I am replacing my trigger through Brownells as well.
Mossberg customer service knew immediately how I had broken the trigger, and stated it would not be covered under warranty. Further they explained that the trigger was a restricted item and could not be shipped to me if I was not a gunsmith. Brownell's part was cheaper anyway.