Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

H-S PRECISION
700 SHORT ACTION 308 DETACHABLE BOTTOM METALS

393000031

Add all the convenience of drop-free, box magazine to your favorite Remington 700 BDL. Spring-loaded finger latch inside the triggerguard drops the box magazine free, speeds loading and unloading. Made from durable stainless steel and finished with bake-on, matte, black Teflon® coating that's self-lubricating and resists scratches and wear. Updated version have positive locking springs on the bottom of both sides of the floor plate (holds the magazine box securely in place without the rubber o-ring), a polymer boot on bottom of box (easier to remove), and a guide slot and larger rear catch on back of box (ensures proper latch).

SPECS: Stainless steel, black, matte finish. 9.3 oz.(265 g) approximate wt. Fits H.S. Precision 2000 and Rem. 700 BDL long and short actions. Will fit Rem. ADL with modifications to stock. May require gunsmithing/fitting. Magazine Capacity – Five rounds with .223, .222 & .204, four rounds with standard calibers, ten rounds available for 308 and similar calibers, three or eight rounds with magnum calibers (8rd magazine holds 7 or 8, depending on cartridge).

Mer...

Legg til all bekvemmeligheten av et magasin med drop-free, boksmagasin til din favoritt Remington 700 BDL. En fjærbelastet fingerlås inni avtrekkerbøylen slipper boksmagasinet fritt, noe som gir raskere lasting og lossing. Laget av holdbart rustfritt stål og fullført med en bake-på, matt, svart Teflon®-belegg som er selvsmørende og motstår riper og slitasje. Oppdatert versjon har positive låsefjærer på bunnen av begge sider av bunnplaten (holder magasinboksen sikkert på plass uten gummiringen), en polymerstøvel på bunnen av boksen (lettere å fjerne), og en føringsspor og større bakre fangst på baksiden av boksen (sikrer riktig låsing).

SPECS: Rustfritt stål, svart, matt finish. Omtrentlig vekt 9.3 oz.(265 g). Passer til H.S. Precision 2000 og Rem. 700 BDL lange og korte handlinger. Vil passe til Rem. ADL med modifikasjoner til kolben. Kan kreve børsemakerarbeid/tilpasning. Magasinkapasitet – Fem runder med .223, .222 & .204, fire runder med standardkalibre, ti runder tilgjengelig for 308 og lignende kalibre, tre eller åtte runder med magnumkalibre (8rd magasin holder 7 eller 8, avhengig av patron).

Mer...

Kundevurderinger for H-S PRECISION SHORT ACTION MAGAZINE 308

Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 3,8

Better than I expected! (28.12.2013)

This was listed as a drop in kit. But on my Remington 700 bdl, this was not the case. I needed to do a good deal of inletting and relief work to seat this kit properly. No modifying of the kit itself was needed. I used my dremmel tool and slow removal of material until I had a sound fit. Once the main body was seated there were gaps around the edges. I will be using Brownells stainless steel bedding kit to fill these gaps and insure nothing will move about. This kit allows flawless feeding of ammo to battery, and is of better quality than I had anticipated.

Just what I was hoping it would be. (21.05.2014)

I purchased this to upgrade my Remington 700 ADL to a Hogue BDL Stock + the Detachable Magazine. First is that with this Hogue stock I had to do some minor filing and fitting. It does not drop in. It is worth the work and not too hard, if you take your time. It is a great fit and improvement over firing one round at a time. Parts quality is the best I've seen. If you are the patient type you will not be disappointed.

Complete garbage (14.11.2014)

I have a H-S precision stock and this bolts in great and that's it. The rest of the product fails in historic proportions. The bullets don't feed at all. The last round never comes out of the magazine cleanly ever! I am extremely disappointed in this product especially for how much it costs and the "reputation" H-S precision has....

Also if you are a precision shooter and think your hand loads will fit. Think again. I had to the shorten the overal length to get the round to fit in the magazine itself. Again I would NEVER RECOMMEND this to anyone.

Works perfectly (12.05.2015)

I have this system with 5- and 10-round H-S magazines, fitted into the H-S Precision stock that comes from Remington as part of their Model 5R Milspec. While the system is not drop-in, it is *almost* drop-in. The only conflict is the internal latch that holds onto the magazine. When you release the latch moves outward and this conflicts with the stock crosspiece. I got out a riffler file and made a slim diagonal channel in the soft crosspiece material (no neet to touch the aluminum chassis underneath) and in 10 minutes I had a perfect drop-in fit. On my Manners T5A the same fitment is required, plus a slight enlargement of the rearmost portion of the mag well. Manners will perform this themselves at no cost on a BDL-inlet stock if you ask them at time of purchase.

As to functionality, it is perfect. If your rounds don't fit this magazine then they don't fit any magazine. then they must not conform to 7.62 NATO specs. I have run several types of ammo plus handloads with an OALT of 2.793" and they fit fine. 145gr commercial ammo has a bunch of extra room. 175gr commercial match ammo not so much, but it fits.

Very good product (09.04.2016)

Was very easy to install. Took about 30 mins. Small file and a little time. Fits perfectly. Loads perfectly. Well worth the little time and money.

Box magazine conversion #1 upgrade !! (29.07.2013)

Generation 2 of this product is vastly superior to the original. Less noise, more positive lock, and polymer boot to prevent damage when dropped. Easy to install, no fitting necessary.

Requires Gunsmithing (30.09.2013)

This part required a gunsmith to install on a Remington PSS with the H-S precision stock. Had to opened up with a mill.

The mags will not retain and feed rounds reliably without being tuned. The lips are far too wide apart and are flat, as opposed to curved, which would feed better.

The AI variants are much better products and better quality as well.

Great looking product! (12.08.2015)

Did my homework and selected this product for my Rem 700 Sendero based on reviews. When I installed it my first problem was the front action screw now intruded into the action and prevented the bolt from closing. The second issue was the back of the magazine made contact with the lower back bridge of the action and therefore was difficult to install and wouldn't drop from the action when the release was pressed. I installed a .012 shim to correct the problem but then had a problem feeding the last round, (yep, all it takes it .012 to jack it up). I almost sent it back but decided to try removing .015 from the front action screw. The bolt can now close and after testing over three ten round mags I can say it feeds correctly. In defense of HS Precision I seem to always have weird problems when buying and installing stuff like this. I would give it five stars if instructions addressing how to resolve potential problems had been included. I expect it to work as advertised and will repost if I have any major failures. I like that it's a double stack mag and think it's the best looking of all the DBM's on the market.

Les 8 flere anmeldelser fra brownells.com

8399 8399 2 NOK

Produktnr.: 393000031
H-S PRECISION SHORT ACTION MAGAZINE 308
Produsentnr.: AP305 Legg til all bekvemmeligheten av et magasin med drop-free, boksmagasin til din favoritt Remington 700 BDL. En fjærbelastet fingerlås inni avtrekkerbøylen slipper boksmagasinet fritt, noe som gir raskere lasting og lossing. Laget av holdbart rustfritt stål og fullført med en bake-på, matt, svart Teflon®-belegg som er selvsmørende og motstår riper og slitasje. Oppdatert versjon har positive låsefjærer på bunnen av begge sider av bunnplaten (holder magasinboksen sikkert på plass uten gummiringen), en polymerstøvel på bunnen av boksen (lettere å fjerne), og en føringsspor og større bakre fangst på baksiden av boksen (sikrer riktig låsing).

8399 NOK 4 kr 8 399,00 *

Leveringstid ca. 14-21 dager.
4 stk. på lageret i USA

Spesifikasjoner: Finish: Black Make: Remington Modell: 700

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Magasinet er laget av rustfritt stål med matt, svart Teflon®-belegg som er selvsmørende og motstår riper og slitasje.
Den fjærbelastede fingerlåsen i avtrekkerbøylen gir raskere lasting og lossing av boksmagasinet.
Passer til H.S. Precision 2000 og Remington 700 BDL, med mulighet for tilpasning til Remington ADL.

Attributes

Finish: Black Make: Remington Modell: 700 Leveringsvekt: 0,113kg Frakthøyde: 28mm Fraktbredde: 74mm Fraktlengde: 163mm

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Produktnr.: 393000037
H-S PRECISION SHORT ACTION DETACHABLE MAGAZINE 308 10RD
Produsentnr.: AP307 Legg til all bekvemmeligheten av et magasin med drop-free, boksmagasin til din favoritt Remington 700 BDL. En fjærbelastet fingerlås inni avtrekkerbøylen slipper boksmagasinet fritt, noe som gir raskere lasting og lossing. Laget av holdbart rustfritt stål og fullført med en bake-på, matt, svart Teflon®-belegg som er selvsmørende og motstår riper og slitasje. Oppdatert versjon har positive låsefjærer på bunnen av begge sider av bunnplaten (holder magasinboksen sikkert på plass uten gummiringen), en polymerstøvel på bunnen av boksen (lettere å fjerne), og en føringsspor og større bakre fangst på baksiden av boksen (sikrer riktig låsing).

8399 NOK 4 kr 8 399,00 *

Leveringstid ca. 14-21 dager.
4 stk. på lageret i USA

Spesifikasjoner: Finish: Black Make: Remington Modell: 700

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Oppgrader din Remington 700 med dette holdbare 308 detachable bottom metal. 🔒 Raskere lasting og slitesterk finish for optimal ytelse!

Mer...

Kundevurderinger for H-S PRECISION SHORT ACTION MAGAZINE 308

Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 3,8

Better than I expected! (28.12.2013)

Just what I was hoping it would be. (21.05.2014)

Complete garbage (14.11.2014)

Works perfectly (12.05.2015)

Very good product (09.04.2016)

Was very easy to install. Took about 30 mins. Small file and a little time. Fits perfectly. Loads perfectly. Well worth the little time and money.

Box magazine conversion #1 upgrade !! (29.07.2013)

Generation 2 of this product is vastly superior to the original. Less noise, more positive lock, and polymer boot to prevent damage when dropped. Easy to install, no fitting necessary.

Requires Gunsmithing (30.09.2013)