Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

WILSON COMBAT
1911 BULLET PROOF™ EXTRACTOR

874218001834 965415070

Extra-Tough, Machined From Solid Bar Stock

Fully Machined from S7 shockproof tool steel with a tensile strength of 275,000 PSI Optimized hook design for maximum strength and case rim contact Hook location tolerances held to +/- .001" Radiused corners for extended life and smooth feeding Full diameter rear shaft holds tension longer over factory parts many times over Heat treated to optimum hardness and cryogenically treated

SPECS: Steel, blue, matte finish. .45 ACP only, available to fit either Series 70 or Series 80.

Mer...

Ekstra robust, maskinert fra massivt stangstål

Fullstendig maskinert fra S7 støtsikkert verktøystål med en trekkstyrke på 275 000 PSI. Optimalisert krokdesign for maksimal styrke og kontakt med hylsekanten. Toleranser for krokposisjon holdes til +/- 0,001". Avrundede hjørner for lengre levetid og jevn mating. Full diameter på bakre aksel holder spenningen lengre enn fabrikkdeler mange ganger over. Varmebehandlet for optimal hardhet og kryogenisk behandlet

SPECS: Stål, blå, matt finish. Kun for .45 ACP, tilgjengelig for både Series 70 og Series 80.

Mer...

Kundevurderinger for WILSON COMBAT SERIES 70 45 ACP BULLET PROOF EXTRACTOR

Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 4

wish it would work (16.04.2014)

Bought this to replace the stock extractor on my taurus 1911, however when i recieved it i installed it and it does not contain the firing pin safety plug, it just falls right right so i guess i will be on the phone with brownells and wilson combat

Ignore 1 Star Review, This the real deal (20.09.2017)

Ignore the one star review, the reviewer obviously is not very 1911 savvy. There is no "safety plug" that comes with an extractor. I believe he mis-ordered the parts he needed. Anyway this extractor is exactly what you need for Series 80 1911s to replace the factory MIM extractor with a bar stock solid steel, high performing extractor.

Very first part to replace on any Kimber (24.11.2017)

I have bought and used many of these Wilson extractors on Kimber guns. This particular one is required for all newer Kimber's Series II Kimber 1911s since 2001. Earlier Kimbers to 2001 use the series 70 extractor.

I am not a gunsmith. I have never had a installation issue with any of these. I had 1 out of a dozen not fit perfectly flush to the gun's exterior - minor cosmetic issue. All extractors have been able to be inserted into the slide, and tuned for reliable function.

I would not trust any MIM extractor.

The next part to consider changing on a Kimber is the slide stop. I prefer Dan Wesson Valor forged slide stops; Ed Brown makes a good one but it has a smaller flared area than the Dan Wesson's part.

Neither of these upgrades should require a gunsmith, so you spend about $90.00 for a much more reliable Kimber.

The next area to consider for a reliability upgrade on a Kimber is trigger components, spending about $100-$150 for quality trigger components like C&S, or EGW which includes forged hammer, sear, and disconnector. Finally, I would spend another $30 to get a forged extended ejector like Wilson.

This should be the minimal replacement for Kimber parts if you plan to use the gun for defense at about $220.

Excellent and easy to install (18.12.2017)

The original extractor in my early productions Colf M1991A1 started to fail to hold tension. Ordered this extractor. First thing I noticed is the hook is correctly beveled out of the package. Installed it in my slide with a new Harrison Extreme Service Firing Pin Stop. I only needed to add a little more tension and it was perfect. The rear of the extractor almost matches the slide, you canât tell itâs a little long until you run your fingers over it. Looks great. Passed the 10-8 extractor test with 230gr ball and 230gr Gold Dots. I am very pleased.

Ignore the interview about the Taurus PT1911. The Taurus may be a clone of a series 80 Colt but itâs not identical. Series 80 is a Colt product and this part is made for a Colt product.

<img width="500" src='/userdocs/reviewimages/6d5222d9-3014-4c93-9b2b-f237db3c20b6.jpg' alt=''>

The Best (24.05.2012)

At first, When i tried to insert the extractor, it would not go in. I then pushed a little harder and (happily) it slid in snug as snug can get, with no movement into my Mark IV/Series 70 Colt.

Works great - Springfield 1911 A1 Mil Sp (18.08.2012)

I had to replace my extractor and the Wilson Combat Bullet Proof works better than the new one did. I'm getting another for my Micro Compact.

Great Extractor (26.08.2012)

Fit in my Kimber Custom II like a glove. Extractor fits flush on the rear of slide, and does it's job when firing the gun. Just had to bend it to get it to it's desired tension. The color is a nice matte black that blends in with the slide.

Beware (31.10.2013)

ordered 2 of these for a customer and they were both very weak. I could bend them with just my hands! I called Wilson's customer service and the tech told me they are having problems with their supplier. I thought they made them but apparently they don't. It could be a temporary issue but why risk it. I personally prefer Ed Browns parts.

Solved failures in my Kimber 1911s (03.09.2016)

I had a few polymer Kimbers with reliability issues. I bought these, tuned them according to instructions I saw on YouTube, and they have not failed me since. Later I added an EGW flat bottom firing pin stop to help when shooting +P loads. Love it!

Les 9 flere anmeldelser fra brownells.com

799 949 4 NOK

Produktnr.: 965415070
WILSON COMBAT SERIES 70 45 ACP BULLET PROOF EXTRACTOR
Produsentnr.: 415-70 874218001834 Fullstendig maskinert fra S7 støtsikkert verktøystål med en trekkstyrke på 275 000 PSI. Optimalisert krokdesign for maksimal styrke og kontakt med hylsekanten. Toleranser for krokposisjon holdes til +/- 0,001". Avrundede hjørner for lengre levetid og jevn mating. Full diameter på bakre aksel holder spenningen lengre enn fabrikkdeler mange ganger over. Varmebehandlet for optimal hardhet og kryogenisk behandlet

799 NOK 0 kr 799,00 *

Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

Spesifikasjoner: Finish: Blued Kaliber: 45 Caliber (.451-.454) Make: 1911 Modell: Government, Commander, Officers

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Fullstendig maskinert fra S7 støtsikkert verktøystål med en trekkstyrke på 275 000 PSI og optimalisert krokdesign for maksimal styrke og kontakt med hylsekanten.
Toleranser for krokposisjon holdes til +/- 0,001" og avrundede hjørner for lengre levetid og jevn mating.
Full diameter på bakre aksel holder spenningen lengre enn fabrikkdeler, varmebehandlet for optimal hardhet og kryogenisk behandlet.

Attributes

Finish: Blued Kaliber: 45 Caliber (.451-.454) Make: 1911 Modell: Commander,Government,Officers Leveringsvekt: 0,014kg Fraktbredde: 83mm Fraktlengde: 146mm UPC : 874218001834

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Produktnr.: 965000237
WILSON COMBAT EXTRACTOR-70 SERIES-.45ACP-BULLET PROOF® XS-BLUE
Produsentnr.: 788B-45 811826021861 Fullstendig maskinert fra S7 støtsikkert verktøystål med en trekkstyrke på 275 000 PSI. Optimalisert krokdesign for maksimal styrke og kontakt med hylsekanten. Toleranser for krokposisjon holdes til +/- 0,001". Avrundede hjørner for lengre levetid og jevn mating. Full diameter på bakre aksel holder spenningen lengre enn fabrikkdeler mange ganger over. Varmebehandlet for optimal hardhet og kryogenisk behandlet

949 NOK 2 kr 949,00 *

Leveringstid ca. 14-21 dager.
2 stk. på lageret i USA

Spesifikasjoner: Finish: Blued Kaliber: 45 Caliber (.451-.454) Make: 1911

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Produktnr.: 965000238
WILSON COMBAT EXTRACTOR-70 SERIES-.38 SUPER/9MM-BULLET PROOF® XS-BLUE
Produsentnr.: 788B-9 811826021878 Fullstendig maskinert fra S7 støtsikkert verktøystål med en trekkstyrke på 275 000 PSI. Optimalisert krokdesign for maksimal styrke og kontakt med hylsekanten. Toleranser for krokposisjon holdes til +/- 0,001". Avrundede hjørner for lengre levetid og jevn mating. Full diameter på bakre aksel holder spenningen lengre enn fabrikkdeler mange ganger over. Varmebehandlet for optimal hardhet og kryogenisk behandlet

949 NOK 4 kr 949,00 *

Leveringstid ca. 14-21 dager.
4 stk. på lageret i USA

Spesifikasjoner: Finish: Blued Kaliber: 9 mm (.355-.356), 38 Super (.355-.356) Make: 1911

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Produktnr.: 965415080
WILSON COMBAT SERIES 80 45 ACP BULLET PROOF EXTRACTOR
Produsentnr.: 415-80 874218001852 Fullstendig maskinert fra S7 støtsikkert verktøystål med en trekkstyrke på 275 000 PSI. Optimalisert krokdesign for maksimal styrke og kontakt med hylsekanten. Toleranser for krokposisjon holdes til +/- 0,001". Avrundede hjørner for lengre levetid og jevn mating. Full diameter på bakre aksel holder spenningen lengre enn fabrikkdeler mange ganger over. Varmebehandlet for optimal hardhet og kryogenisk behandlet

799 NOK 0 kr 799,00 *

Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

Spesifikasjoner: Finish: Blued Kaliber: 45 Caliber (.451-.454) Make: 1911 Modell: Government, Commander, Officers

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Oppgrader din 1911 med BULLET PROOF™ EXTRACTOR! 🔧 Laget av S7 stål for maksimal styrke og holdbarhet. Perfekt for .45 ACP!

Extra-Tough, Machined From Solid Bar Stock

SPECS: Steel, blue, matte finish. .45 ACP only, available to fit either Series 70 or Series 80.

Mer...

Ekstra robust, maskinert fra massivt stangstål

SPECS: Stål, blå, matt finish. Kun for .45 ACP, tilgjengelig for både Series 70 og Series 80.

Mer...

Kundevurderinger for WILSON COMBAT SERIES 70 45 ACP BULLET PROOF EXTRACTOR

Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 4

wish it would work (16.04.2014)

Ignore 1 Star Review, This the real deal (20.09.2017)

Very first part to replace on any Kimber (24.11.2017)

Excellent and easy to install (18.12.2017)

The Best (24.05.2012)

At first, When i tried to insert the extractor, it would not go in. I then pushed a little harder and (happily) it slid in snug as snug can get, with no movement into my Mark IV/Series 70 Colt.

Works great - Springfield 1911 A1 Mil Sp (18.08.2012)

I had to replace my extractor and the Wilson Combat Bullet Proof works better than the new one did. I'm getting another for my Micro Compact.

Great Extractor (26.08.2012)