Unique Feed Lip Geometry Maintains A Consistent Angle For Reliable Feeding
These high-quality magazines have a unique, straight feed lip contour that helps maintain a consistent feed angle for reliable chambering of 9mm ammo. Body tube is through-hardened for superior strength and durability, then polished inside and out to eliminate drag. Follower has an extended front skirt, an anti-friction dry-film finish, and proper dimple placement for precise feed and function with every round. Floorplate is pre-drilled to accept aftermarket screw-on base pads (not included) with .524" center-to-center hole spacing. High-performance spring offers outstanding reliability and long life.
SPECS: Stainless steel, natural silver finish.
Mer...
Unik Mateleppe Geometri Opprettholder En Konsekvent Vinkel For Pålitelig Mating
Disse høykvalitets magasinene har en unik, rett mating leppekontur som bidrar til å opprettholde en konsekvent matevinkel for pålitelig kamring av 9mm ammunisjon. Magasinkroppen er herdet for overlegen styrke og holdbarhet, og deretter polert innvendig og utvendig for å eliminere friksjon. Følgeren har en utvidet frontskjørt, en antifriksjons tørrfilmfinish, og riktig plassering av fordypning for presis mating og funksjon med hver runde. Bunnskiven er forhåndsborret for å akseptere ettermarkedets skruepå baseputer (ikke inkludert) med .524" senter-til-senter hullavstand. Høytytende fjær tilbyr enestående pålitelighet og lang levetid.
SPECS: Rustfritt stål, naturlig sølvfinish.
Mer...
Kundevurderinger for CHECK-MATE INDUSTRIES 9MM MAGAZINE, 9-RD
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4
No go with HP's(01.07.2010)
I got this to use in an STI 9mm 1911 and it will not work with 9rds of HP but will work with 9rds of FMJ's sent back to Check-mate and still dose not work right
Works Great with 1911 STI(19.11.2010)
Bought 10 mags for use with a STI 1911 in 9mm.shot 3 boxes of Federal ([...]) 115gr fmj.not one single problem, also de gun is new.with 124g Montana, reloads with a minor power factor, 2 FTF, L 1.150. Well made mags.Buy the Ed Brown pads, 6 in a bag, perfect fit.Also part of the FTF was that the Recoil Spring is not for the lower loads od the reloads.I shoot USPSA 6 times a month (700-800 Rds)Also IDPA twice a month
Good Buy(03.01.2011)
Nice mags. Bought three for my STI sentry 9mm and they work very well. One mag was a little tight putting in the ninth round, but it loosened up after a range session. Other than that no problems. Will buy more in the future. I'd give 'em five stars if the base plate was removable and holes were threaded. Ed Brown bumper pads worked well, though.
Meh, might be the gun, but I think not(01.02.2012)
I bought three of these magazines to go with the Caspian 9mm 1911 I built for my wife. There is a lot of variation in these magazines, as two go into the magwell pretty easily, but the third does not--feels like the body of the magazine is too wide for the frame.
When test firing the gun (please take note of this--this was my first time firing the gun), the rounds seemed to have a tendency to nose dive into the (admittedly) short ramp on the Kart EZ Fit barrel I installed. This happened just about every round.
Also, the rounds do not seat all the way to the rear of the magazine, often feeling like the slide doesn't get a good bite onto the back of the case to feed it into the chamber properly.
Putting the last round into the magazine was pretty bad, too.
Please keep in mind, I also only fired 100 rounds during this first range session, so it was about 33-34 rounds per magazine. They may loosen up over time--I'm not convinced, however.
I am also using an STI Recoil Master, so I don't know if that's causing the problem. I do know, however, that I've had to push the rounds around after feeding them into the magazine to get them to push the nose of the bullet above the front lip of the magazine body.
I want to try a couple of different magazine types, but at this time, I can't recommend these magazines for someone who needs the gun to be completely reliable.
And who doesn't want that?
Check-Mate 9mm Mags(18.08.2012)
I have been using these in a 9mm Combat Commander for IPSC Competition. I have had no feed issues and they drop cleanly from the pistol.
Excellent build(26.07.2014)
Received the mags today and have to say, these are so good I will be changing the factory mags from my STI Spartan to these for a full set. The build quality is outstanding and the follower sits the cartridge up high for a smooth reliable feed.
Best mag for my 9 mm SA RO(26.09.2014)
Great product and great price. They are cheaper here than through SA.
Produktnr.: 100004787 CHECK-MATE INDUSTRIES 9MM MAGAZINE, 9-RD Produsentnr.: CM9MM9S850020492329 Disse høykvalitets magasinene har en unik, rett mating leppekontur som bidrar til å opprettholde en konsekvent matevinkel for pålitelig kamring av 9mm ammunisjon. Magasinkroppen er herdet for overlegen styrke og holdbarhet, og deretter polert innvendig og utvendig for å eliminere friksjon. Følgeren har en utvidet frontskjørt, en antifriksjons tørrfilmfinish, og riktig plassering av fordypning for presis mating og funksjon med hver runde. Bunnskiven er forhåndsborret for å akseptere ettermarkedets skruepå baseputer (ikke inkludert) med .524" senter-til-senter hullavstand. Høytytende fjær tilbyr enestående pålitelighet og lang levetid.
549NOK32kr 549,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Made in USA
US eksport klassifisering: 0A501.x
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Oppdag 1911 9RD 9MM magasiner fra CHECK-MATE INDUSTRIES! ✨ Høykvalitets, slitesterk design for pålitelig ammunisjon. Bestill nå!
Unique Feed Lip Geometry Maintains A Consistent Angle For Reliable Feeding
These high-quality magazines have a unique, straight feed lip contour that helps maintain a consistent feed angle for reliable chambering of 9mm ammo. Body tube is through-hardened for superior strength and durability, then polished inside and out to eliminate drag. Follower has an extended front skirt, an anti-friction dry-film finish, and proper dimple placement for precise feed and function with every round. Floorplate is pre-drilled to accept aftermarket screw-on base pads (not included) with .524" center-to-center hole spacing. High-performance spring offers outstanding reliability and long life.
SPECS: Stainless steel, natural silver finish.
Mer...
Unik Mateleppe Geometri Opprettholder En Konsekvent Vinkel For Pålitelig Mating
Disse høykvalitets magasinene har en unik, rett mating leppekontur som bidrar til å opprettholde en konsekvent matevinkel for pålitelig kamring av 9mm ammunisjon. Magasinkroppen er herdet for overlegen styrke og holdbarhet, og deretter polert innvendig og utvendig for å eliminere friksjon. Følgeren har en utvidet frontskjørt, en antifriksjons tørrfilmfinish, og riktig plassering av fordypning for presis mating og funksjon med hver runde. Bunnskiven er forhåndsborret for å akseptere ettermarkedets skruepå baseputer (ikke inkludert) med .524" senter-til-senter hullavstand. Høytytende fjær tilbyr enestående pålitelighet og lang levetid.
SPECS: Rustfritt stål, naturlig sølvfinish.
Mer...
Kundevurderinger for CHECK-MATE INDUSTRIES 9MM MAGAZINE, 9-RD
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4
No go with HP's(01.07.2010)
I got this to use in an STI 9mm 1911 and it will not work with 9rds of HP but will work with 9rds of FMJ's sent back to Check-mate and still dose not work right
Works Great with 1911 STI(19.11.2010)
Bought 10 mags for use with a STI 1911 in 9mm.shot 3 boxes of Federal ([...]) 115gr fmj.not one single problem, also de gun is new.with 124g Montana, reloads with a minor power factor, 2 FTF, L 1.150. Well made mags.Buy the Ed Brown pads, 6 in a bag, perfect fit.Also part of the FTF was that the Recoil Spring is not for the lower loads od the reloads.I shoot USPSA 6 times a month (700-800 Rds)Also IDPA twice a month
Good Buy(03.01.2011)
Nice mags. Bought three for my STI sentry 9mm and they work very well. One mag was a little tight putting in the ninth round, but it loosened up after a range session. Other than that no problems. Will buy more in the future. I'd give 'em five stars if the base plate was removable and holes were threaded. Ed Brown bumper pads worked well, though.
Meh, might be the gun, but I think not(01.02.2012)
I bought three of these magazines to go with the Caspian 9mm 1911 I built for my wife. There is a lot of variation in these magazines, as two go into the magwell pretty easily, but the third does not--feels like the body of the magazine is too wide for the frame.
When test firing the gun (please take note of this--this was my first time firing the gun), the rounds seemed to have a tendency to nose dive into the (admittedly) short ramp on the Kart EZ Fit barrel I installed. This happened just about every round.
Also, the rounds do not seat all the way to the rear of the magazine, often feeling like the slide doesn't get a good bite onto the back of the case to feed it into the chamber properly.
Putting the last round into the magazine was pretty bad, too.
Please keep in mind, I also only fired 100 rounds during this first range session, so it was about 33-34 rounds per magazine. They may loosen up over time--I'm not convinced, however.
I am also using an STI Recoil Master, so I don't know if that's causing the problem. I do know, however, that I've had to push the rounds around after feeding them into the magazine to get them to push the nose of the bullet above the front lip of the magazine body.
I want to try a couple of different magazine types, but at this time, I can't recommend these magazines for someone who needs the gun to be completely reliable.
And who doesn't want that?
Check-Mate 9mm Mags(18.08.2012)
I have been using these in a 9mm Combat Commander for IPSC Competition. I have had no feed issues and they drop cleanly from the pistol.
Excellent build(26.07.2014)
Received the mags today and have to say, these are so good I will be changing the factory mags from my STI Spartan to these for a full set. The build quality is outstanding and the follower sits the cartridge up high for a smooth reliable feed.
Best mag for my 9 mm SA RO(26.09.2014)
Great product and great price. They are cheaper here than through SA.