Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

CHECK-MATE INDUSTRIES
1911 9RD 9MM MAGAZINES

850020492329 100004787

Unique Feed Lip Geometry Maintains A Consistent Angle For Reliable Feeding

These high-quality magazines have a unique, straight feed lip contour that helps maintain a consistent feed angle for reliable chambering of 9mm ammo. Body tube is through-hardened for superior strength and durability, then polished inside and out to eliminate drag. Follower has an extended front skirt, an anti-friction dry-film finish, and proper dimple placement for precise feed and function with every round. Floorplate is pre-drilled to accept aftermarket screw-on base pads (not included) with .524" center-to-center hole spacing. High-performance spring offers outstanding reliability and long life.

SPECS: Stainless steel, natural silver finish.

Mer...

Unik Mateleppe Geometri Opprettholder En Konsekvent Vinkel For Pålitelig Mating

Disse høykvalitets magasinene har en unik, rett mating leppekontur som bidrar til å opprettholde en konsekvent matevinkel for pålitelig kamring av 9mm ammunisjon. Magasinkroppen er herdet for overlegen styrke og holdbarhet, og deretter polert innvendig og utvendig for å eliminere friksjon. Følgeren har en utvidet frontskjørt, en antifriksjons tørrfilmfinish, og riktig plassering av fordypning for presis mating og funksjon med hver runde. Bunnskiven er forhåndsborret for å akseptere ettermarkedets skruepå baseputer (ikke inkludert) med .524" senter-til-senter hullavstand. Høytytende fjær tilbyr enestående pålitelighet og lang levetid.

SPECS: Rustfritt stål, naturlig sølvfinish.

Mer...

Kundevurderinger for CHECK-MATE INDUSTRIES 9MM MAGAZINE, 9-RD

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4

No go with HP's (01.07.2010)

I got this to use in an STI 9mm 1911 and it will not work with 9rds of HP but will work with 9rds of FMJ's sent back to Check-mate and still dose not work right

Works Great with 1911 STI (19.11.2010)

Bought 10 mags for use with a STI 1911 in 9mm.shot 3 boxes of Federal ([...]) 115gr fmj.not one single problem, also de gun is new.with 124g Montana, reloads with a minor power factor, 2 FTF, L 1.150. Well made mags.Buy the Ed Brown pads, 6 in a bag, perfect fit.Also part of the FTF was that the Recoil Spring is not for the lower loads od the reloads.I shoot USPSA 6 times a month (700-800 Rds)Also IDPA twice a month

Good Buy (03.01.2011)

Nice mags. Bought three for my STI sentry 9mm and they work very well. One mag was a little tight putting in the ninth round, but it loosened up after a range session. Other than that no problems. Will buy more in the future. I'd give 'em five stars if the base plate was removable and holes were threaded. Ed Brown bumper pads worked well, though.

Meh, might be the gun, but I think not (01.02.2012)

I bought three of these magazines to go with the Caspian 9mm 1911 I built for my wife. There is a lot of variation in these magazines, as two go into the magwell pretty easily, but the third does not--feels like the body of the magazine is too wide for the frame.

When test firing the gun (please take note of this--this was my first time firing the gun), the rounds seemed to have a tendency to nose dive into the (admittedly) short ramp on the Kart EZ Fit barrel I installed. This happened just about every round.

Also, the rounds do not seat all the way to the rear of the magazine, often feeling like the slide doesn't get a good bite onto the back of the case to feed it into the chamber properly.

Putting the last round into the magazine was pretty bad, too.

Please keep in mind, I also only fired 100 rounds during this first range session, so it was about 33-34 rounds per magazine. They may loosen up over time--I'm not convinced, however.

I am also using an STI Recoil Master, so I don't know if that's causing the problem. I do know, however, that I've had to push the rounds around after feeding them into the magazine to get them to push the nose of the bullet above the front lip of the magazine body.

I want to try a couple of different magazine types, but at this time, I can't recommend these magazines for someone who needs the gun to be completely reliable.

And who doesn't want that?

Check-Mate 9mm Mags (18.08.2012)

I have been using these in a 9mm Combat Commander for IPSC Competition. I have had no feed issues and they drop cleanly from the pistol.

Excellent build (26.07.2014)

Received the mags today and have to say, these are so good I will be changing the factory mags from my STI Spartan to these for a full set. The build quality is outstanding and the follower sits the cartridge up high for a smooth reliable feed.

Best mag for my 9 mm SA RO (26.09.2014)

Great product and great price. They are cheaper here than through SA.

Les 7 flere anmeldelser fra brownells.com

549 549 1 NOK

Produktnr.: 100004787
CHECK-MATE INDUSTRIES 9MM MAGAZINE, 9-RD
Produsentnr.: CM9MM9S 850020492329 Disse høykvalitets magasinene har en unik, rett mating leppekontur som bidrar til å opprettholde en konsekvent matevinkel for pålitelig kamring av 9mm ammunisjon. Magasinkroppen er herdet for overlegen styrke og holdbarhet, og deretter polert innvendig og utvendig for å eliminere friksjon. Følgeren har en utvidet frontskjørt, en antifriksjons tørrfilmfinish, og riktig plassering av fordypning for presis mating og funksjon med hver runde. Bunnskiven er forhåndsborret for å akseptere ettermarkedets skruepå baseputer (ikke inkludert) med .524" senter-til-senter hullavstand. Høytytende fjær tilbyr enestående pålitelighet og lang levetid.

549 NOK 32 kr 549,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Capacity: 9-Round Finish: Silver Kaliber: 9 mm Luger Make: 1911 Material: Stainless Steel Modell: Government, Commander Antall: 1

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Høykvalitets 9mm magasin med en unik, rett mating leppekontur for pålitelig kamring.
Rustfritt stål med naturlig sølvfinish, herdet for overlegen styrke og holdbarhet.
Følgeren har antifriksjons tørrfilmfinish og bunnskiven er forhåndsborret for baseputer.

Attributes

Cartridge: 9 mm Luger Finish: Silver Kapasitet: 9-Round Make: 1911 Material: Stainless Steel Modell: Commander,Government Leveringsvekt: 0,113kg Frakthøyde: 33mm Fraktbredde: 117mm Fraktlengde: 262mm UPC : 850020492329

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.x

Oppdag 1911 9RD 9MM magasiner fra CHECK-MATE INDUSTRIES! ✨ Høykvalitets, slitesterk design for pålitelig ammunisjon. Bestill nå!

Unique Feed Lip Geometry Maintains A Consistent Angle For Reliable Feeding

SPECS: Stainless steel, natural silver finish.

Mer...

Unik Mateleppe Geometri Opprettholder En Konsekvent Vinkel For Pålitelig Mating

SPECS: Rustfritt stål, naturlig sølvfinish.

Mer...

Kundevurderinger for CHECK-MATE INDUSTRIES 9MM MAGAZINE, 9-RD

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4

No go with HP's (01.07.2010)

I got this to use in an STI 9mm 1911 and it will not work with 9rds of HP but will work with 9rds of FMJ's sent back to Check-mate and still dose not work right

Works Great with 1911 STI (19.11.2010)