Over 300 000 kunder - vi takker dere!

40 000+ produkter for jakt og skytesport

EGW
WALTHER PPQ M2 LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370116850 296000543
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Bushnell RXS-100 Crimson Trace CTS-1500 Holosun 407K* Holosun 507K* Holosun EPS-GR* Holosun EPS-RD* Holosun EPS-Carry-GR* Holosun EPS-Carry-RD* Jpoint Leupold Delta Point Pro Optima Redfield Accelerator Shield RMS Shield RMSc Shield SMS Sig Romeo Zero EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
0 0 1 NOK
Produktnr.: 296000543
EGW WALTHER PPQ M2 LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Produsentnr.: 49394 841370116850 Materiale: 7075 Aluminium Belegg: Matt svart hardcoat Total lengde: 1.811" Total bredde: .99" Monteringsutstyr: (2) 6-32 knappehodeskruer, (2) 6-32 flate hodeskruer, (1) 6-32 sett skrue Rød prikk tilpasning: Bushnell RXS-100 Crimson Trace CTS-1500 Holosun 407K* Holosun 507K* Holosun EPS-GR* Holosun EPS-RD* Holosun EPS-Carry-GR* Holosun EPS-Carry-RD* Jpoint Leupold Delta Point Pro Optima Redfield Accelerator Shield RMS Shield RMSc Shield SMS Sig Romeo Zero EGWs rødpunktsikter er ment å installeres fra venstre til høyre (med munningen vendt fremover). Svalehalen har en progressiv avsmalning for enklere installasjon. Bare fjern baksiktet på våpenet ditt og erstatt det med vår montering for å montere ditt Vortex Viper/Venom, Burris FastFire eller Docter rødpunktsikte. Ingen modifikasjoner er nødvendige. Du kan når som helst ta av vår montering og erstatte baksiktet. Monteringsutstyr inkludert. Installasjonsinstruksjoner Fjern baksiktet* Installer EGW Sight Mount i svalehalen Stram sett skruen (hvis aktuelt) Plasser rødpunktsiktet på EGW Sight Mount (å legge en liten bit papir mellom rødpunktsiktet og siktefeste vil gjøre fjerning enklere og vil holde Loctite borte fra rødpunktsiktet.) Påfør blå Loctite på de medfølgende monteringsskruene Trekk til monteringsskruene til 15in/lbs 2 knappehodeskruer - Levert for Vortex Viper og Venom sikter 2 flate hodeskruer - Levert for Burris FastFire og Docter sikter Skruene som følger med dette festet krever en 5/64'' unbrakonøkkel for installasjon.
Varsle ved tilgjengelighet
Ikke tilgjengelig.
Spesifikasjoner: Farge: Black Make: Walther Material: Aluminum Modell: PPQ M2 Number of Bases: 1-Piece Style: Tactical

Top takeaways

  1. Materiale: 7075 Aluminium med matt svart hardcoat belegg, designet for å passe flere rødpunktsikter som Leupold Delta Point Pro og Holosun modeller.
  2. Enkel installasjon uten behov for modifikasjoner, med monteringsutstyr inkludert og detaljerte instruksjoner for å sikre riktig festing.
  3. Passer spesifikt for Walther PPQ M2 og kan enkelt erstattes med baksiktet når som helst.

Attributes

Farge: Black Make: Walther Material: Aluminum Modell: PPQ M2 Number of Bases: 1-Piece Style: Tactical Leveringsvekt: 0,227kg Frakthøyde: 25mm Fraktbredde: 76mm Fraktlengde: 127mm UPC : 841370116850

Elementdetaljer

Made in USA



Oppgrader din Walther PPQ M2 med EGW Leupold Deltapoint Pro Sight Mount! ✨ Enkel installasjon og solid aluminiumkonstruksjon.

Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Bushnell RXS-100 Crimson Trace CTS-1500 Holosun 407K* Holosun 507K* Holosun EPS-GR* Holosun EPS-RD* Holosun EPS-Carry-GR* Holosun EPS-Carry-RD* Jpoint Leupold Delta Point Pro Optima Redfield Accelerator Shield RMS Shield RMSc Shield SMS Sig Romeo Zero EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Tilbake til toppen