ZEV TECHNOLOGIES
PRO CONNECTOR FOR GLOCK®

811338030917 100012422

Features: Precision cut and bent for the greatest consistency possible New proprietary material for improved spring tension Material and geometry allows for improved reset When used in conjunction with the Glockworx Spring Kit (100-004-108), a 3lb trigger will be possible while maintaining a crisp, positive reset

Specs: Fits all Glock but Models 42 or 43.

Mer...

Egenskaper: Nøyaktig kuttet og bøyd for å oppnå størst mulig konsistens Nytt proprietært materiale for forbedret fjærspenning Materialet og geometrien muliggjør en forbedret tilbakestilling Når den brukes sammen med Glockworx Spring Kit (100-004-108), vil en 3lb avtrekker være mulig samtidig som man opprettholder et skarpt, positivt reset

Spesifikasjoner: Passer alle Glock, unntatt modellene 42 eller 43.

Mer...

Kundevurderinger for ZEV TECHNOLOGIES PRO CONNECTOR FOR GLOCK®

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 3,6

Light and silky smooth (10.12.2013)

Great product. Lighter and smoother than either the factory part or the Lone Wolf 3.5 lb connector. No gritty feel, no drag. I also bought the Ghost Ultimate, but haven't had a chance to try it yet. It might be as good as the Glockworx, but I don't see how it could be better. Combined with the Glockworx Competition Spring Kit you've got a pretty sweet trigger at a very reasonable cost.

Excellent connector (24.01.2014)

Best connector I've tried if wanting a lighter pull. High quality.

Maybe, maybe not (13.05.2014)

The trigger pull is great after installing this and a connector, but I have one problem. To describe it best, it's like the trigger safety gets "hung" on the Glock frame. I installed two on different Glocks and they both did it. I haven't gotten into a cure yet, but it will take one. I would not recommend this to someone who couldn't tweak it to get that out.

Works Good (10.05.2016)

This was quite the improvement over the stock connector. It eased the trigger press greatly and was very smooth in its function. It fit correctly and functioned flawlessly. I never oil the the connector and trigger bar as recommended by Glock, however I do lubricate this area will a small amount of fine graphite at each cleaning. Overall it is a good improvement for a small amount of money.

Zev Connector (05.06.2017)

I installed this on my Glock 19 and the trigger broke very late and had a spongie feel. The weight didn't drop compared to the factory part. The point to where the trigger would break wasn't a solid wall. I even tried 2 other complete triggers and they didn't function at all. I was unable to get the pistol to fire. Im a firearms examiner for a major dept and armorer to several brands of firearms. Not recommended.

Works as advertised. (12.06.2017)

Picked this up for a G17. When reassembled correctly, it reduced my trigger to about 3.7lb which is close enough. So I have no issues with the connector.

I did however also get the ZEV spring kit and did not have as good of luck with that. I have a review of that too, but the short version is the trigger spring caused issues.

CAUSED ACCIDENTAL DOUBLE FIRE (12.12.2017)

This connector should be used along with the Zev trigger only and not the stock Glock trigger or another aftermarket trigger. With the stock Glock trigger it takes some poundage off of the trigger pull, but it takes away the crisp wall and makes the trigger pull very mushy without a clear break. When used with a Hyve trigger, it made my glock unintentionally fire immediately upon the resetting of the trigger. In other words, it made my gun fire once when I pulled the trigger, then a second time when I took my finger off the trigger. Although to some a double fire trigger may be considered a "happy mistake" it is not safe to use in my gun for concealed carry purposes. I uninstalled this connector and put back in the stock one for a more predictable, safe, and clean trigger pull.

Les 7 flere anmeldelser fra brownells.com

459 459 1 NOK

Produktnr.: 100012422
ZEV TECHNOLOGIES PRO CONNECTOR FOR GLOCK®
Produsentnr.: CONN-PRO 811338030917 Egenskaper: Nøyaktig kuttet og bøyd for å oppnå størst mulig konsistens Nytt proprietært materiale for forbedret fjærspenning Materialet og geometrien muliggjør en forbedret tilbakestilling Når den brukes sammen med Glockworx Spring Kit (100-004-108), vil en 3lb avtrekker være mulig samtidig som man opprettholder et skarpt, positivt reset

459 NOK 1 kr 459,00 *

Leveringstid ca. 14-21 dager.
1 stk. på lageret i USA

Spesifikasjoner: Make: Glock Modell: Universal Handguns

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Presist kuttet og bøyd for maksimal konsistens og forbedret tilbakestilling.
Nytt proprietært materiale gir bedre fjærspenning og muliggjør en 3lb avtrekker med Glockworx Spring Kit.
Passer alle Glock-modeller unntatt 42 og 43.