Extremely lightweight titanium safety plunger reduces mass for a lighter felt trigger pull. Titanium nitride coating reduces friction. One of those small detail that helps complete a Glock® trigger job. Includes Wolff safety plunger spring.
Hjelper Deg Med Å Få En Glattere, Lettere Avtrekksvekt
Ekstremt lett titan sikkerhetsplunger reduserer masse for en lettere følt avtrekksvekt. Titan nitrid belegg reduserer friksjon. En av de små detaljene som hjelper med å fullføre en Glock® avtrekksjobb. Inkluderer Wolff sikkerhetsplungerfjær.
Kundevurderinger for LIGHTNING STRIKE LARGE SAFETY PLUNGER
Antall vurderinger: 10
Fra brownells.com: 10
Gjennomsnittsvurdering: 4,4
G 22(30.10.2010)
wonderful product. Use it with the 3.5 ghost connector and the trigger feels alot smoother. The oringal trigger weight is just fine but had to much creep and the break was not clean. With these two products the creep has almost been eliminated and is a smooth draw and a clean break. Would put these in any Glock.
Improving perfection(20.01.2011)
I install this safety plunger as part of a personal trigger job on all my glocks. They work find and I have not had any problems with them.
Glock Titanium safety plunger(12.01.2012)
If you have a glock, you need this!!! It makes the trigger feel more that of one on a double action pistol. I can now feel a sooth pre-travel, followed by a crisp action.
Glock Safety Plunger(11.05.2014)
I think the plunger offers an upgrade in the performance of the pistol when combined with a new connector. The edges of the plunger are much smoother and stronger so you should experience a long service life. It certainly makes the feel of the trigger more crisp. It is a drop in item so no fitting or polishing is required.
Longevity issues(01.04.2015)
I wish it lasted a little longer. I wore this sucker out with just over 3,000 rounds down the pipe. When I first installed the Ti plunger its operation was smooth and silky, but with over 3,000 rounds through my Gen4 G22 with the Ti Safety Plunger installed, it was beginning to feel gritty and showing signs of wear, most notable is scoring of the cylinder edge that contacts the extractor. I like this product, but I had to pull it out of my weapon when I found metal shavings inside the plunger hole, striker pin channel and on the extractor. I run my weapon pretty hard and never experienced a malfunction or FTE, but I cannot continue to use this plunger in it's current condition.
Hmmm.... I wonder if Brownells will replace it? Maybe I should give the sales team a call.
Not suitable for self defense ..(12.04.2018)
The lower cylinder started to scar and leave metal chips in my plunger hole after 100 rounds. Glock 17. Not suitable for a self defense or high use range gun. It simply is not reliable. Someone needs to hire a metallurgist and rework this entire thing. Helped smooth out trigger quite a bit when new. Used with six pound spring, and 3.5 lb trigger connector. Like tossing 20 dollars down the toilet. Went back to just polishing the glock saftey plunger.
model 30(23.02.2010)
fit perfect in the gun. much better than the factory plunger. trigger pull is much smoother. looks good also
Trigger Job(20.01.2011)
I use this product as part of a trigger job for all my Glocks. Easy installation, have had no problems, and is economical.
Good addition to a reduced pull trigger.(31.07.2011)
I have fired 200+ rounds downrange on trigger job, which includes the L.S. titanium plunger. It ads to a smooth, more consistent, lightened trigger. It also complements the L.S. titanium striker. T.P.D.A.
Fantastic Product(02.10.2012)
I installed this safety plunger (and supplied spring) along with a 969-161-610 Reduced Power Striker Spring in my carry G19. Previously I had installed a 3.5 pound connector and NY1 spring to create a steady pressure trigger similar to a double action revolver. These two parts changed the trigger pull into a very smooth action and the pull weight dropped from just under 8 pounds to 6.5 pounds. It is hard to imagine the difference without actually experiencing it.
Produktnr.: 642102017 LIGHTNING STRIKE LARGE SAFETY PLUNGER Produsentnr.: LS2024 Ekstremt lett titan sikkerhetsplunger reduserer masse for en lettere følt avtrekksvekt. Titan nitrid belegg reduserer friksjon. En av de små detaljene som hjelper med å fullføre en Glock® avtrekksjobb. Inkluderer Wolff sikkerhetsplungerfjær.
699NOK0kr 699,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Made in USA
US eksport klassifisering: 0A501.x
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr.: 642102021 LIGHTNING STRIKE SMALL SAFETY PLUNGER Produsentnr.: LS7924 Ekstremt lett titan sikkerhetsplunger reduserer masse for en lettere følt avtrekksvekt. Titan nitrid belegg reduserer friksjon. En av de små detaljene som hjelper med å fullføre en Glock® avtrekksjobb. Inkluderer Wolff sikkerhetsplungerfjær.
419NOK0kr 419,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Extremely lightweight titanium safety plunger reduces mass for a lighter felt trigger pull. Titanium nitride coating reduces friction. One of those small detail that helps complete a Glock® trigger job. Includes Wolff safety plunger spring.
Hjelper Deg Med Å Få En Glattere, Lettere Avtrekksvekt
Ekstremt lett titan sikkerhetsplunger reduserer masse for en lettere følt avtrekksvekt. Titan nitrid belegg reduserer friksjon. En av de små detaljene som hjelper med å fullføre en Glock® avtrekksjobb. Inkluderer Wolff sikkerhetsplungerfjær.
Kundevurderinger for LIGHTNING STRIKE LARGE SAFETY PLUNGER
Antall vurderinger: 10
Fra brownells.com: 10
Gjennomsnittsvurdering: 4,4
G 22(30.10.2010)
wonderful product. Use it with the 3.5 ghost connector and the trigger feels alot smoother. The oringal trigger weight is just fine but had to much creep and the break was not clean. With these two products the creep has almost been eliminated and is a smooth draw and a clean break. Would put these in any Glock.
Improving perfection(20.01.2011)
I install this safety plunger as part of a personal trigger job on all my glocks. They work find and I have not had any problems with them.
Glock Titanium safety plunger(12.01.2012)
If you have a glock, you need this!!! It makes the trigger feel more that of one on a double action pistol. I can now feel a sooth pre-travel, followed by a crisp action.
Glock Safety Plunger(11.05.2014)
I think the plunger offers an upgrade in the performance of the pistol when combined with a new connector. The edges of the plunger are much smoother and stronger so you should experience a long service life. It certainly makes the feel of the trigger more crisp. It is a drop in item so no fitting or polishing is required.
Longevity issues(01.04.2015)
I wish it lasted a little longer. I wore this sucker out with just over 3,000 rounds down the pipe. When I first installed the Ti plunger its operation was smooth and silky, but with over 3,000 rounds through my Gen4 G22 with the Ti Safety Plunger installed, it was beginning to feel gritty and showing signs of wear, most notable is scoring of the cylinder edge that contacts the extractor. I like this product, but I had to pull it out of my weapon when I found metal shavings inside the plunger hole, striker pin channel and on the extractor. I run my weapon pretty hard and never experienced a malfunction or FTE, but I cannot continue to use this plunger in it's current condition.
Hmmm.... I wonder if Brownells will replace it? Maybe I should give the sales team a call.
Not suitable for self defense ..(12.04.2018)
The lower cylinder started to scar and leave metal chips in my plunger hole after 100 rounds. Glock 17. Not suitable for a self defense or high use range gun. It simply is not reliable. Someone needs to hire a metallurgist and rework this entire thing. Helped smooth out trigger quite a bit when new. Used with six pound spring, and 3.5 lb trigger connector. Like tossing 20 dollars down the toilet. Went back to just polishing the glock saftey plunger.
model 30(23.02.2010)
fit perfect in the gun. much better than the factory plunger. trigger pull is much smoother. looks good also
Trigger Job(20.01.2011)
I use this product as part of a trigger job for all my Glocks. Easy installation, have had no problems, and is economical.
Good addition to a reduced pull trigger.(31.07.2011)
I have fired 200+ rounds downrange on trigger job, which includes the L.S. titanium plunger. It ads to a smooth, more consistent, lightened trigger. It also complements the L.S. titanium striker. T.P.D.A.
Fantastic Product(02.10.2012)
I installed this safety plunger (and supplied spring) along with a 969-161-610 Reduced Power Striker Spring in my carry G19. Previously I had installed a 3.5 pound connector and NY1 spring to create a steady pressure trigger similar to a double action revolver. These two parts changed the trigger pull into a very smooth action and the pull weight dropped from just under 8 pounds to 6.5 pounds. It is hard to imagine the difference without actually experiencing it.
Hjelp og kontakt
(0) 
Nyhetsbrev
Klassisk visning
Mobilvisning