For Ultra-Secure Mounting Of Large-Objective Scopes
Oversized rings provide extra contact area for ultra-secure mounting of large optics on hard-recoiling, long-range rifles such as sniper rifles. Fits all Weaver-style bases. Six no-strip, no-slip Torx® screws hold down the ring cap to ensure the scope keeps its position even under heavy recoil. Oversize hex nuts allow quick removal or attachment of optics in dynamic situations.
SPECS: Aluminum, hardcoat anodized, matte black. Height measured from top of base to underside of scope body. 1" High - .400" high. Accepts scopes with objectives up to 44mm dia. 1" Extra High - .525" high. Accepts objectives up to 50mm dia. 30mm High - .495" high. Accepts objectives up to 44mm dia.
Mer...
For Ultra-Sikker Montering Av Store-Objektiv Kikkertsikter
Oversized ringer gir ekstra kontaktflate for ultra-sikker montering av store optikk på hardt-rekylerende, langdistanse rifler som skarpskytterrifler. Passer alle Weaver-stil baser. Seks Torx® skruer som ikke strippes eller sklir holder ringkappen på plass for å sikre at kikkertsiktet beholder sin posisjon selv under kraftig rekyl. Oversize sekskantmuttere tillater rask fjerning eller festing av optikk i dynamiske situasjoner.
SPECS: Aluminium, hardcoat anodisert, matt svart. Høyde målt fra toppen av basen til undersiden av kikkertsiktet. 1" Høy - .400" høy. Aksepterer kikkertsikter med objektiver opp til 44mm dia. 1" Ekstra Høy - .525" høy. Aksepterer objektiver opp til 50mm dia. 30mm Høy - .495" høy. Aksepterer objektiver opp til 44mm dia.
Mer...
Kundevurderinger for WEAVER 1" TACTICAL RINGS, HIGH
Antall vurderinger: 3
Fra brownells.com: 3
Gjennomsnittsvurdering: 4,3
Excellent product for a good price(29.08.2010)
It doesn't get any better. I have three sets of these rings on rifles from a Ruger 10/22, Colt AR-15A3 and a Springfield Armory M1A.
One, the ring looks very cool. Two, it's large area provides a huge purchase area for secure mounting on scopes - especially large scopes. Once snugged up nothing moves -period. six screws hold down the ring cap and a large nut positively secures the ring to your picatinny or Weaver base.
Great rings for the money(11.04.2011)
These are solid, heavy duty rings! The caps were not matched to the bottoms very well, but after some fit testing, and about an hour of lapping, i got a nice seamless fit.I dont know if these are strong enough for the larger belted magnums, but they are plenty strong enough for non belted cartridges. These are plenty high enough to fit a 44 or 50 mm scope.
Great rings, too low for AR(23.01.2012)
These are very solid, well built scope rings. They have plenty of clearence for mounting at least a 40mm scope, with room left for scope covers. For a regular rifle, they would be ideal. Unfortunately I purchased these to mount a scope on an AR rifle with a flat top receiver. The scope ends up between 1/2 to 3/4 of an inch too low to be used in any other fashion than turning your head sideways and resting it on the butt stock. NOT a comfortable position. If you are looking to mount something on a standard rifle, these are well worth the cost. Find something else if you are going to use an AR.
Produktnr.: 955000138 WEAVER 1" TACTICAL RINGS, HIGH Produsentnr.: 48350076683483508 Oversized ringer gir ekstra kontaktflate for ultra-sikker montering av store optikk på hardt-rekylerende, langdistanse rifler som skarpskytterrifler. Passer alle Weaver-stil baser. Seks Torx® skruer som ikke strippes eller sklir holder ringkappen på plass for å sikre at kikkertsiktet beholder sin posisjon selv under kraftig rekyl. Oversize sekskantmuttere tillater rask fjerning eller festing av optikk i dynamiske situasjoner.
1299NOK55kr 1 299,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Spesifikasjoner:Finish: Matte BlackHeight: .495''Scope Tube Diameter: 1''Style: Weaver-Style RingsStørrelse: High
Produktnr.: 955000140 WEAVER 30MM TACTICAL RINGS, HIGH Produsentnr.: 48352076683483522 Oversized ringer gir ekstra kontaktflate for ultra-sikker montering av store optikk på hardt-rekylerende, langdistanse rifler som skarpskytterrifler. Passer alle Weaver-stil baser. Seks Torx® skruer som ikke strippes eller sklir holder ringkappen på plass for å sikre at kikkertsiktet beholder sin posisjon selv under kraftig rekyl. Oversize sekskantmuttere tillater rask fjerning eller festing av optikk i dynamiske situasjoner.
1299NOK34kr 1 299,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Spesifikasjoner:Finish: Matte BlackHeight: .400''Scope Tube Diameter: 30mmStyle: Weaver-Style RingsStørrelse: High
Produktnr.: 955000139 WEAVER 1" TACTICAL RINGS, EXTRA-HIGH Produsentnr.: 48351076683483515 Oversized ringer gir ekstra kontaktflate for ultra-sikker montering av store optikk på hardt-rekylerende, langdistanse rifler som skarpskytterrifler. Passer alle Weaver-stil baser. Seks Torx® skruer som ikke strippes eller sklir holder ringkappen på plass for å sikre at kikkertsiktet beholder sin posisjon selv under kraftig rekyl. Oversize sekskantmuttere tillater rask fjerning eller festing av optikk i dynamiske situasjoner.
1299NOK2kr 1 299,00
*
Leveringstid ca. 14-21 dager. 2 stk. på lageret i USA
Spesifikasjoner:Finish: Matte BlackHeight: .525''Scope Tube Diameter: 1''Style: Weaver-Style RingsStørrelse: Extra High
For Ultra-Secure Mounting Of Large-Objective Scopes
Oversized rings provide extra contact area for ultra-secure mounting of large optics on hard-recoiling, long-range rifles such as sniper rifles. Fits all Weaver-style bases. Six no-strip, no-slip Torx® screws hold down the ring cap to ensure the scope keeps its position even under heavy recoil. Oversize hex nuts allow quick removal or attachment of optics in dynamic situations.
SPECS: Aluminum, hardcoat anodized, matte black. Height measured from top of base to underside of scope body. 1" High - .400" high. Accepts scopes with objectives up to 44mm dia. 1" Extra High - .525" high. Accepts objectives up to 50mm dia. 30mm High - .495" high. Accepts objectives up to 44mm dia.
Mer...
For Ultra-Sikker Montering Av Store-Objektiv Kikkertsikter
Oversized ringer gir ekstra kontaktflate for ultra-sikker montering av store optikk på hardt-rekylerende, langdistanse rifler som skarpskytterrifler. Passer alle Weaver-stil baser. Seks Torx® skruer som ikke strippes eller sklir holder ringkappen på plass for å sikre at kikkertsiktet beholder sin posisjon selv under kraftig rekyl. Oversize sekskantmuttere tillater rask fjerning eller festing av optikk i dynamiske situasjoner.
SPECS: Aluminium, hardcoat anodisert, matt svart. Høyde målt fra toppen av basen til undersiden av kikkertsiktet. 1" Høy - .400" høy. Aksepterer kikkertsikter med objektiver opp til 44mm dia. 1" Ekstra Høy - .525" høy. Aksepterer objektiver opp til 50mm dia. 30mm Høy - .495" høy. Aksepterer objektiver opp til 44mm dia.
Mer...
Kundevurderinger for WEAVER 1" TACTICAL RINGS, HIGH
Antall vurderinger: 3
Fra brownells.com: 3
Gjennomsnittsvurdering: 4,3
Excellent product for a good price(29.08.2010)
It doesn't get any better. I have three sets of these rings on rifles from a Ruger 10/22, Colt AR-15A3 and a Springfield Armory M1A.
One, the ring looks very cool. Two, it's large area provides a huge purchase area for secure mounting on scopes - especially large scopes. Once snugged up nothing moves -period. six screws hold down the ring cap and a large nut positively secures the ring to your picatinny or Weaver base.
Great rings for the money(11.04.2011)
These are solid, heavy duty rings! The caps were not matched to the bottoms very well, but after some fit testing, and about an hour of lapping, i got a nice seamless fit.I dont know if these are strong enough for the larger belted magnums, but they are plenty strong enough for non belted cartridges. These are plenty high enough to fit a 44 or 50 mm scope.
Great rings, too low for AR(23.01.2012)
These are very solid, well built scope rings. They have plenty of clearence for mounting at least a 40mm scope, with room left for scope covers. For a regular rifle, they would be ideal. Unfortunately I purchased these to mount a scope on an AR rifle with a flat top receiver. The scope ends up between 1/2 to 3/4 of an inch too low to be used in any other fashion than turning your head sideways and resting it on the butt stock. NOT a comfortable position. If you are looking to mount something on a standard rifle, these are well worth the cost. Find something else if you are going to use an AR.