The Apex Spring Kit for the SDVE produces a smoother trigger pull and improved reset and is designed for Duty/Carry use. The kit works as a stand-alone or in conjunction with the Apex Polymer Action Enhancement Trigger for the SDVE. NOT for use in the Sigma Series pistols.
Mer...
Apex Spring Kit for SDVE gir en jevnere avtrekksfølelse og forbedret tilbakestilling, og er designet for tjeneste-/bærebruk. Settet fungerer som en frittstående enhet eller i kombinasjon med Apex Polymer Action Enhancement Trigger for SDVE. IKKE for bruk i Sigma Series pistoler.
Mer...
Kundevurderinger for APEX TACTICAL SPECIALTIES INC S&W SDVE SPRING KIT
Antall vurderinger: 2
Fra brownells.com: 2
Gjennomsnittsvurdering: 4,5
25 PERCENT TRIGGER PULL REDUCTION (07.11.2017)
SPRINGS INSTALLED WITHOUT ANY NEED TO FIT OR MODIFY THEM OR PISTOL. ORIGINAL TRIGGER PULL WAS
8 1/4 LBS AND WITH APEX SPRING KIT IT NOW BREAKS AT
6 LBS. ROLL PIN HOLDING SEAR BLOCK IS VERY TIGHT SO MAKE SURE YOU USE CORRECT SIZE PUNCH AND GOOD SUPPORT.
Almost mandatory add-on(12.08.2018)
The Apex spring kit for the SD9 series is almost a mandatory add on. In fact I wonder why S&W doesn't install this kit at the factory or just include it in the box. Spend a few minutes and $20 and your trigger goes from 8.5# with a stiff break to 6.25# or so with a much cleaner break. About the same weight as factory Glock trigger. Apex provides an instant trigger job with no reduction in reliability or liability. I have now installed 3 of these kits and have yet to be disappointed in any way. Can't say that about the Galloway kit. Plus if you want to improve the pull even more, add on the trigger upgrade as well. Since I don't mind the pivoting trigger I just use the springs.
Produktnr.: 100019864 APEX TACTICAL SPECIALTIES INC S&W SDVE SPRING KIT Produsentnr.: 107-120856008005390 Apex Spring Kit for SDVE gir en jevnere avtrekksfølelse og forbedret tilbakestilling, og er designet for tjeneste-/bærebruk. Settet fungerer som en frittstående enhet eller i kombinasjon med Apex Polymer Action Enhancement Trigger for SDVE. IKKE for bruk i Sigma Series pistoler.
599NOK8kr 599,00
*
Leveringstid ca. 14-21 dager. 8 stk. på lageret i USA
The Apex Spring Kit for the SDVE produces a smoother trigger pull and improved reset and is designed for Duty/Carry use. The kit works as a stand-alone or in conjunction with the Apex Polymer Action Enhancement Trigger for the SDVE. NOT for use in the Sigma Series pistols.
Mer...
Apex Spring Kit for SDVE gir en jevnere avtrekksfølelse og forbedret tilbakestilling, og er designet for tjeneste-/bærebruk. Settet fungerer som en frittstående enhet eller i kombinasjon med Apex Polymer Action Enhancement Trigger for SDVE. IKKE for bruk i Sigma Series pistoler.
Mer...
Kundevurderinger for APEX TACTICAL SPECIALTIES INC S&W SDVE SPRING KIT
Antall vurderinger: 2
Fra brownells.com: 2
Gjennomsnittsvurdering: 4,5
25 PERCENT TRIGGER PULL REDUCTION (07.11.2017)
SPRINGS INSTALLED WITHOUT ANY NEED TO FIT OR MODIFY THEM OR PISTOL. ORIGINAL TRIGGER PULL WAS
8 1/4 LBS AND WITH APEX SPRING KIT IT NOW BREAKS AT
6 LBS. ROLL PIN HOLDING SEAR BLOCK IS VERY TIGHT SO MAKE SURE YOU USE CORRECT SIZE PUNCH AND GOOD SUPPORT.
Almost mandatory add-on(12.08.2018)
The Apex spring kit for the SD9 series is almost a mandatory add on. In fact I wonder why S&W doesn't install this kit at the factory or just include it in the box. Spend a few minutes and $20 and your trigger goes from 8.5# with a stiff break to 6.25# or so with a much cleaner break. About the same weight as factory Glock trigger. Apex provides an instant trigger job with no reduction in reliability or liability. I have now installed 3 of these kits and have yet to be disappointed in any way. Can't say that about the Galloway kit. Plus if you want to improve the pull even more, add on the trigger upgrade as well. Since I don't mind the pivoting trigger I just use the springs.