On the bench or in the field, you ll have the right screwdrivers for your gun in one compact, go-anywhere package. We precisely matched each gun s screws to the correct Magna-Tip® bits to give you the best possible, blade-to-slot fit. Except where indicated otherwise, each set comes with a magnetic socket, Hollow Handle for easy, on-board storage of the bits. Four bits to fit side plate, grip, thumb latch, and rear sight elevation and tang screws.
SPECS: 8" (20.3cm) long overall. 1¼" (3.2cm) diameter grip.
Mer...
Selvlagrende, Bærbar For Børsemakere & Skyttere
På verkstedet eller i felt, vil du ha de riktige skrutrekkerne for ditt våpen i en kompakt, alt-i-ett pakke som er enkel å ta med seg. Vi har nøye matchet hver skrue på våpenet til de korrekte Magna-Tip® bitsene for å gi deg den best mulige, blad-til-spor passformen. Bortsett fra der annet er angitt, kommer hvert sett med en magnetisk sokkel, Hollow Handle for enkel, ombord lagring av bitsene. Fire bits for å passe til sideplaten, grep, tommellås, og baksikte høyde og tang skruer.
SPECS: 8" (20.3cm) lang totalt. 1¼" (3.2cm) diameter på grep.
Mer...
Kundevurderinger for BROWNELLS S&W COMBO BITS ONLY
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 3,6
Tips are too thin for my J frame.(19.02.2017)
This set of bits are good quality, but were useless for the side plate and crane screws on a 1999 640-1and a 2016 340 M&P. The tip thickness of the 150-3 included in the set is too thin to properly fit the screw notches.
The Best(04.09.2009)
The only Screwdrivers and bits I use to work on Guns.
VERY NICE!(18.08.2010)
These Brownell bits are superbly crafted and fit all my S&W revolvers, from J-Frames to N-Frames. Plus, they fit many slotted fasteners on my rifles too. I'm so impressed, I'm going to order a complete Brownell's bit set.
Not up to Brownells usual quality(27.10.2011)
On the very first screw, a side plate screw, the screwdriver tip bent and buggered up the screw head. Very dissappointed!
Excellent Bits(06.04.2012)
My armored courier company very recently began issuing semi-automatics. But before that, everyone brought me their guns to clean. This 4-in-1 screwdriver let me clean and lubricate everything on our model 64's easily and without damage to the weapons. If you're doing anything with a S&W revolver, you need this.
Nice set, but missing an important bit.(08.08.2014)
I like the bits and the handle and the idea of including a set up the most used bits for a S&W revolver. The problem is, the MOST used bit for my N framed 625 isn't included. None of the included bits properly fit the yoke screw (which appears to need a 180-4 bit. Some of the bits that are included don't seem to fit anything on my revolver. They may be for a different frame size. But, the kit should have the proper yoke screw bit for each frame size.
Excellent Product(08.02.2017)
Purchased this set for my S&W 460 and 500. The smallest bit seems to have no real use for my S&W X-frames, the other bits are excellent for the side plate and cylinder release screws.
The larger bit is good for the grip screw but somewhat undersized. Overall an excellent product!
Produktnr.: 080087002 BROWNELLS S&W COMBO BITS ONLY050806007963 På verkstedet eller i felt, vil du ha de riktige skrutrekkerne for ditt våpen i en kompakt, alt-i-ett pakke som er enkel å ta med seg. Vi har nøye matchet hver skrue på våpenet til de korrekte Magna-Tip® bitsene for å gi deg den best mulige, blad-til-spor passformen. Bortsett fra der annet er angitt, kommer hvert sett med en magnetisk sokkel, Hollow Handle for enkel, ombord lagring av bitsene. Fire bits for å passe til sideplaten, grep, tommellås, og baksikte høyde og tang skruer.
329NOK8kr 329,00
*
Leveringstid ca. 14-21 dager. 8 stk. på lageret i USA
Spesifikasjoner:Make: Smith & WessonModell: Universal Handguns
Produktnr.: 080087004 BROWNELLS S&W 4-IN-1 COMBO SCREWDRIVER050806007970 På verkstedet eller i felt, vil du ha de riktige skrutrekkerne for ditt våpen i en kompakt, alt-i-ett pakke som er enkel å ta med seg. Vi har nøye matchet hver skrue på våpenet til de korrekte Magna-Tip® bitsene for å gi deg den best mulige, blad-til-spor passformen. Bortsett fra der annet er angitt, kommer hvert sett med en magnetisk sokkel, Hollow Handle for enkel, ombord lagring av bitsene. Fire bits for å passe til sideplaten, grep, tommellås, og baksikte høyde og tang skruer.
599NOK46kr 599,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Spesifikasjoner:Handle: 84 HollowMake: Smith & WessonModell: Universal HandgunsStyle: 4-Bits
On the bench or in the field, you ll have the right screwdrivers for your gun in one compact, go-anywhere package. We precisely matched each gun s screws to the correct Magna-Tip® bits to give you the best possible, blade-to-slot fit. Except where indicated otherwise, each set comes with a magnetic socket, Hollow Handle for easy, on-board storage of the bits. Four bits to fit side plate, grip, thumb latch, and rear sight elevation and tang screws.
SPECS: 8" (20.3cm) long overall. 1¼" (3.2cm) diameter grip.
Mer...
Selvlagrende, Bærbar For Børsemakere & Skyttere
På verkstedet eller i felt, vil du ha de riktige skrutrekkerne for ditt våpen i en kompakt, alt-i-ett pakke som er enkel å ta med seg. Vi har nøye matchet hver skrue på våpenet til de korrekte Magna-Tip® bitsene for å gi deg den best mulige, blad-til-spor passformen. Bortsett fra der annet er angitt, kommer hvert sett med en magnetisk sokkel, Hollow Handle for enkel, ombord lagring av bitsene. Fire bits for å passe til sideplaten, grep, tommellås, og baksikte høyde og tang skruer.
SPECS: 8" (20.3cm) lang totalt. 1¼" (3.2cm) diameter på grep.
Mer...
Kundevurderinger for BROWNELLS S&W COMBO BITS ONLY
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 3,6
Tips are too thin for my J frame.(19.02.2017)
This set of bits are good quality, but were useless for the side plate and crane screws on a 1999 640-1and a 2016 340 M&P. The tip thickness of the 150-3 included in the set is too thin to properly fit the screw notches.
The Best(04.09.2009)
The only Screwdrivers and bits I use to work on Guns.
VERY NICE!(18.08.2010)
These Brownell bits are superbly crafted and fit all my S&W revolvers, from J-Frames to N-Frames. Plus, they fit many slotted fasteners on my rifles too. I'm so impressed, I'm going to order a complete Brownell's bit set.
Not up to Brownells usual quality(27.10.2011)
On the very first screw, a side plate screw, the screwdriver tip bent and buggered up the screw head. Very dissappointed!
Excellent Bits(06.04.2012)
My armored courier company very recently began issuing semi-automatics. But before that, everyone brought me their guns to clean. This 4-in-1 screwdriver let me clean and lubricate everything on our model 64's easily and without damage to the weapons. If you're doing anything with a S&W revolver, you need this.
Nice set, but missing an important bit.(08.08.2014)
I like the bits and the handle and the idea of including a set up the most used bits for a S&W revolver. The problem is, the MOST used bit for my N framed 625 isn't included. None of the included bits properly fit the yoke screw (which appears to need a 180-4 bit. Some of the bits that are included don't seem to fit anything on my revolver. They may be for a different frame size. But, the kit should have the proper yoke screw bit for each frame size.
Excellent Product(08.02.2017)
Purchased this set for my S&W 460 and 500. The smallest bit seems to have no real use for my S&W X-frames, the other bits are excellent for the side plate and cylinder release screws.
The larger bit is good for the grip screw but somewhat undersized. Overall an excellent product!