Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

BROWNELLS
STEEL PILOTS

050806017931 080686210

Centers Cutters For Accurate Work

Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.

Select one of the following for other rifle/handgun muzzles, cylinder facing & chamfering tools.

	Steel One Caliber Set		45° Cutter & Steel Pilot
	Brass One Caliber Set		45° Cutter & Brass Pilot
	90° Cutter & Steel Pilot		Chamfering & Facing Combo Sets
	90° Cutter & Brass Pilot		Brass Pilot Only

SPECS: Hardened steel. 1¼" (3.2cm) long. .45 ACP Pilots - .45 ACP-1 fits S&W model 25 & 625. .45 ACP-2 fits Colt 1917.

Mer...

Sentrerer Kuttere for Nøyaktig Arbeid

Herdet stålpilot holder Facing og Chamfering-kuttere riktig sentrert i løpet. Motstår slitasje i mange års bruk.

Velg en av følgende for andre rifle-/håndvåpenmunninger, sylinderfacing og avfasningsverktøy.

	Stålsett for én kaliber		45° Kutter & Stål Pilot
	Messingsett for én kaliber		45° Kutter & Messing Pilot
	90° Kutter & Stål Pilot		Kombisett for avfasning og facing
	90° Kutter & Messing Pilot		Kun Messing Pilot

SPECS: Herdet stål. 1¼" (3.2cm) lang. .45 ACP Pilots - .45 ACP-1 passer til S&W modell 25 & 625. .45 ACP-2 passer til Colt 1917.

Mer...

Kundevurderinger for BROWNELLS STEEL PILOT FOR .17 HIGH STD./HM2 MUZZLE (.167")

Antall vurderinger: 10
Fra brownells.com: 10
Gjennomsnittsvurdering: 4,1

Too big for S&W 625 (15.09.2010)

Larger then the 45-1 and that needs to be fit to work with the 625 cylinder

Almost a perfict fit (15.09.2010)

This is the one for the S&W625, it must be turned down for a nice tight wobble free fit but will not wear out after that. Well machined and concentric.

Too small for S&W 610 (15.09.2010)

Very well made, concentric and smooth machining but too small to fit the S&W 610 10mm cylinder. Get the 41mag and turn it down for a perfect zero wobble fit.

Yes this works with Mosins (03.08.2013)

I ordered this pilot for use with an 11 degree muzzle crown tool for my Mosin Nagant rifles. The good, it fit perfect with no wobble. The bad this worked on only one of my rifles, the project gun I ordered it for had a bore diameter of less than .311. No problem I will just order the .30 caliber pilot. I could have ordered the .30 caliber size to begin with but I didn't want a loose fit or have to use a cloth patch to "make" it work.

It is a quality made tool and I can see it lasting a long time with proper care. Yes it works with some Mosins. if you have multiple rifles be prepared to order both of the pilots so you get a perfect fit.

Good quality product (13.11.2009)

The pilot has the look of good quality. The pilot fits the cutter and the muzzle real well.

This fits Mosin Nagant Rifles (10.08.2013)

Good quality pilot, no wobble when used in the proper size bore.

I had a tighter bore Mosin and this worked perfectly. I also ordered the .311 steel pilot to fit my Type 53 Mosin.

If you only plan on buying one pilot to work in all Mosins get this one. If your bore is a little bigger, use a cloth patch to make a tighter fit. This pilot will be loose in the more traditional .311 bore size.

Good quality product. (06.11.2009)

The pilot has the look of good quality. It fits the cutter real well. It also fits real well in the muzzel.

Good quality product. (06.11.2009)

The pilot has the look of qood quality. It fits the cutter real well. It also has a real good fit in the muzzel.

Good quality product. (08.11.2009)

The pilot has a look of good quality. It fits the cutter real well. It also has a good fit in the muzzel.

Good quality product (13.11.2009)

The pilot has the look of good quality. It also fits both the muzzle and cutter real well.

Les 10 flere anmeldelser fra brownells.com

399 499 44 NOK

Produktnr.: 080686210
BROWNELLS STEEL PILOT FOR .17 HIGH STD./HM2 MUZZLE (.167") 050806017931 Herdet stålpilot holder Facing og Chamfering-kuttere riktig sentrert i løpet. Motstår slitasje i mange års bruk.

419 NOK 1 kr 419,00 *

Leveringstid ca. 14-21 dager.
1 stk. på lageret i USA

Spesifikasjoner: Kaliber: 17 Caliber (.172) Material: Steel

BROWNELLS STEEL PILOTS

Kundevurderinger for BROWNELLS STEEL PILOT FOR .17 HIGH STD./HM2 MUZZLE (.167")

Attributes

Elementdetaljer

Kundevurderinger for BROWNELLS STEEL PILOT FOR .17 HIGH STD./HM2 MUZZLE (.167")

Koble til

Sikre betalingsmåter

Bransjeorganisasjoner

Velkommen!

BROWNELLS
STEEL PILOTS