Kundevurderinger for SPRINGFIELD ARMORY SPRINGFIELD M14 STOCK OEM WOOD BROWN
Antall vurderinger: 10
Fra brownells.com: 10
Gjennomsnittsvurdering: 4,4
This is a must have peice of furniture(26.02.2011)
I put this on both of my Socom 16's and they are a much tighter fit than the synthetic stock they came with. My shot groups have improved dramatically and reduced recoil, which I'm sure is due to the extra weight. It also really enhances the overall look and feel. Don't even give this a second thought, BUY it!
Great stock(07.09.2011)
Just buy, and drop in and go! Great fit great finish.
Does not come with all hardware(07.12.2013)
This stock was supposed to be a swap-and-go replacement. My stock did not come with the stock liner screws although they were pictured at the time of purchase. I called customer service and was told that the screws are not included even though they are in the picture that accompanies the product description. I was told, when I called, that I was supposed to use my old screws. I bought this stock to replace my synthetic stock which does not need the screws since the synthetic stock does not have the stock liner. Brownells sent me two screws in an attempt to make it right, but now I need to spend more money to buy the special tool to put the screws in the stock. My stock is sitting unused in the box until I can get one of the tools required to put the stock liner screws in. Hopefully Brownells updates the description of the product soon to accurately reflect what is included with the stock.
Pretty Good, not great(15.01.2014)
I just received my M1A walnut stock. The bad news first, I was disappointed and surprised to see that it did come with the metal stock liner. I ordered the stock liner screws and liner tool based off of another review, but now, I have to order the actual stock liner itself. I bought this stock as a replacement to the black synthetic stock (which doesn't require a stock liner). This might sound picky, but I was also a little disappointed at the look and finish of the INSIDE of the stock. There are a lot of wood burrs left over from milling. Nothing a little sanding can't fix though. Also, when I went to test fit my upper receiver, there was no cutout for the op rod spring guide takedown pin. It went together with a little forcing, which carved out a spot for the pin. The good news is that, the overall finish of the wood looks nice and it came with the metal flip-up butt pad, front stock ferrule, and sling swivels. The price is still fair for it being a finished walnut stock with "most" metal and no selector switch cut-out.
Nice stock(25.01.2014)
had some minor fitting for a Norinco 18" shorty, but it was worth it. The factory plastic Norc stock is junk.
Great product!(19.09.2016)
Awesome stock! Great price. Springfield M1A standard dropped right in and fit like it should have.
Just What I Wanted . . .(10.01.2017)
I have the basic M1A that came with the black synthetic stock, bought about 10 years ago. I always thought this stock was rather cheap-o looking, and wanted to have more of the "real thing," anyway. This fits the bill. The walnut is quite attractive, all of the hardware was already put together on the stock, and it fit perfectly, I think. It required a few "love taps" from a small rubber-faced hammer to do the final "seat," and it looks real sharp. I think I'll replace the top handguard next, the one on there now is the original and I did a DuraCoat tiger stripe on it previously so it doesn't really go with my new "look."
MADE FOR A SPRINGFLIELD!(20.05.2018)
If you own a SPRINGFIELD, M1A (Not an M14) and need the Walnut? This is the one. NOT INTENDED for a Fulton, Norinco.
May work OK with an LRB receiver? I do not know, I don't own an LRB receiver.
May or may NOT come with the steel "Liner" or side screws.
(I'd call first). If you want to replace that flexible plastic stock this will make you happy. Fiberglass is a VERY different animal.
My FACTORY M1A walnut stock had been abused to the end. Just beat up from Tactical drills. This one when arrived DID have the steel liner and screws. My SPRINGFIELD dropped right in.
Wasn't rough with "Lathe issues" or production attention detail problems. Looked exactly like the one I was replacing.
Again! Look at the manufacturer! Actually after receiving this one?
I ordered a second one.
JUST WHAT I WANTED(10.09.2018)
MY STOCK CAME WITH ALL HARDWARE AND MY SOCOM-16 DROPPED RIGHT IN SOLID AND SECURE .
ABSOLUTELY LOVE IT.
MY SOCOM-16 NOW HAS A SOUL .
High Quality and a Beautiful Stock(25.09.2018)
I installed this stock on my M1A Standard that I purchased with a black synthetic stock. It fits perfectly and looks fantastic. I always wanted to change out the synthetic stock for a high quality walnut stock, This is the one to purchase. Perfect fit and I did not need any additional parts or do any customizing.
Farge:
Brown
Make:
Springfield
Material:
Wood
Modell:
M14,M1A
Style:
OEM
Leveringsvekt: 1,474kgFrakthøyde: 70mmFraktbredde: 171mmFraktlengde: 933mm
UPC
: 706397852405
Elementdetaljer
Made in USA
US eksport klassifisering: 0A501.y.1
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
VIKTIG! I henhold til Våpenforskriften § 2.2, må våpenets totallengde ikke være kortere enn 84 cm. Dette ansvaret ligger på deg som kjøper ved enhver modifikasjon. Regel om 84 cm gjelder med stokken innskyvet eller foldet om du benytter en justerbar- eller foldestokk.
Oppgrader din rifle med SPRINGFIELD M14 STOCK i tre brun 🌳. OEM kvalitet fra Springfield Armory for M14 og M1A. Kjøp nå!
Kundevurderinger for SPRINGFIELD ARMORY SPRINGFIELD M14 STOCK OEM WOOD BROWN
Antall vurderinger: 10
Fra brownells.com: 10
Gjennomsnittsvurdering: 4,4
This is a must have peice of furniture(26.02.2011)
I put this on both of my Socom 16's and they are a much tighter fit than the synthetic stock they came with. My shot groups have improved dramatically and reduced recoil, which I'm sure is due to the extra weight. It also really enhances the overall look and feel. Don't even give this a second thought, BUY it!
Great stock(07.09.2011)
Just buy, and drop in and go! Great fit great finish.
Does not come with all hardware(07.12.2013)
This stock was supposed to be a swap-and-go replacement. My stock did not come with the stock liner screws although they were pictured at the time of purchase. I called customer service and was told that the screws are not included even though they are in the picture that accompanies the product description. I was told, when I called, that I was supposed to use my old screws. I bought this stock to replace my synthetic stock which does not need the screws since the synthetic stock does not have the stock liner. Brownells sent me two screws in an attempt to make it right, but now I need to spend more money to buy the special tool to put the screws in the stock. My stock is sitting unused in the box until I can get one of the tools required to put the stock liner screws in. Hopefully Brownells updates the description of the product soon to accurately reflect what is included with the stock.
Pretty Good, not great(15.01.2014)
I just received my M1A walnut stock. The bad news first, I was disappointed and surprised to see that it did come with the metal stock liner. I ordered the stock liner screws and liner tool based off of another review, but now, I have to order the actual stock liner itself. I bought this stock as a replacement to the black synthetic stock (which doesn't require a stock liner). This might sound picky, but I was also a little disappointed at the look and finish of the INSIDE of the stock. There are a lot of wood burrs left over from milling. Nothing a little sanding can't fix though. Also, when I went to test fit my upper receiver, there was no cutout for the op rod spring guide takedown pin. It went together with a little forcing, which carved out a spot for the pin. The good news is that, the overall finish of the wood looks nice and it came with the metal flip-up butt pad, front stock ferrule, and sling swivels. The price is still fair for it being a finished walnut stock with "most" metal and no selector switch cut-out.
Nice stock(25.01.2014)
had some minor fitting for a Norinco 18" shorty, but it was worth it. The factory plastic Norc stock is junk.
Great product!(19.09.2016)
Awesome stock! Great price. Springfield M1A standard dropped right in and fit like it should have.
Just What I Wanted . . .(10.01.2017)
I have the basic M1A that came with the black synthetic stock, bought about 10 years ago. I always thought this stock was rather cheap-o looking, and wanted to have more of the "real thing," anyway. This fits the bill. The walnut is quite attractive, all of the hardware was already put together on the stock, and it fit perfectly, I think. It required a few "love taps" from a small rubber-faced hammer to do the final "seat," and it looks real sharp. I think I'll replace the top handguard next, the one on there now is the original and I did a DuraCoat tiger stripe on it previously so it doesn't really go with my new "look."
MADE FOR A SPRINGFLIELD!(20.05.2018)
If you own a SPRINGFIELD, M1A (Not an M14) and need the Walnut? This is the one. NOT INTENDED for a Fulton, Norinco.
May work OK with an LRB receiver? I do not know, I don't own an LRB receiver.
May or may NOT come with the steel "Liner" or side screws.
(I'd call first). If you want to replace that flexible plastic stock this will make you happy. Fiberglass is a VERY different animal.
My FACTORY M1A walnut stock had been abused to the end. Just beat up from Tactical drills. This one when arrived DID have the steel liner and screws. My SPRINGFIELD dropped right in.
Wasn't rough with "Lathe issues" or production attention detail problems. Looked exactly like the one I was replacing.
Again! Look at the manufacturer! Actually after receiving this one?
I ordered a second one.
JUST WHAT I WANTED(10.09.2018)
MY STOCK CAME WITH ALL HARDWARE AND MY SOCOM-16 DROPPED RIGHT IN SOLID AND SECURE .
ABSOLUTELY LOVE IT.
MY SOCOM-16 NOW HAS A SOUL .
High Quality and a Beautiful Stock(25.09.2018)
I installed this stock on my M1A Standard that I purchased with a black synthetic stock. It fits perfectly and looks fantastic. I always wanted to change out the synthetic stock for a high quality walnut stock, This is the one to purchase. Perfect fit and I did not need any additional parts or do any customizing.
Hjelp og kontakt
(0) 
Nyhetsbrev
Klassisk visning
Mobilvisning