Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

SMITH ENTERPRISE
SPRINGFIELD M14 MUZZLE BRAKE 30 CALIBER

851100014

Drop-On Recoil & Muzzle Control; Fits Domestic & Chinese M14/M1A's

Lets you spend more time practicing with your favorite high-power, match rifle without the recoil. Absolutely no gunsmithing required for amazing muzzle control and greatly reduced felt recoil even on select-fire rifles. Changes the sharp recoil that most shooters experience with the military stock into a soft push. Easily replaces the issue flash hider without alterations and includes the front sight dovetail and castle nut set screw.

Note: Will NOT fit Norinco/Polytech (M305) with M15x.75 thread.

SPECS: Machined steel, manganese phosphate finish. 3" (7.6cm) long, .862" (21mm) diameter, 4.3 oz. (123 g.) wt.

Mer...

Enkel Påmontering for Rekyl & Munningskontroll; Passer til Både Innenlandske & Kinesiske M14/M1A's

Lar deg bruke mer tid på å øve med ditt favoritt høyeffekts konkurransegevær uten rekyl. Absolutt ingen behov for børsemakertjenester for fantastisk munningskontroll og sterkt redusert følt rekyl selv på helautomatiske rifler. Endrer den skarpe rekyl som de fleste skyttere opplever med militær standard til et mykt dytt. Erstatter enkelt den originale flammedemperen uten modifikasjoner og inkluderer kornets spor og låsemutterens innstillingsskrue.

Merk: Passer IKKE til Norinco/Polytech (M305) med M15x.75 gjenger.

SPECS: Maskinert stål, manganfosfat finish. 3" (7.6cm) lang, .862" (21mm) diameter, 4.3 oz. (123 g.) vekt.

Mer...

Kundevurderinger for SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 3,9

Great Product (22.12.2010)

Easy to intsall. Intsalled it on my Chicom M14. Recoil feels like a 5.56 mm.

Great Product (08.03.2011)

Installed in minutes. Installed using only castle nut pliers, No allignment tool needed. Works as described, reducing recoil and muzzle flip.

Best Brake I've ever seen (19.10.2011)

Reduces muzzle climb to Nil.
A felt reduction in recoil.

I noticed an improvement in accuracy immediately. This is the best brake for the m14/m1a I have seen.

Smooth recoil (11.04.2014)

I originally bought this product to give my M1A a different look. I had it installed at my local gun range by a professional gunsmith, shot a few rounds down range just to try this muzzle break, and I can say that it took away the edge of the recoil and made it smoother.I would highly recommend it for all M1A/M14 owners

Disappointing (08.08.2015)

Unlike the Good Iron Muzzle Break for the M1 Garand this is a two piece unit â¦ that is not clear from the description, or pictures, on the web site.

The unit I received had already begun to rust at the point where the rear mount and the break connect. The finish was scratched, dented, and overall the finish was poor.

Perhaps worse than the rust and the finish was that the rear mount and the break were not properly aligned. I didn't break out the protractor to figure out exactly how far, but looking at it from the rear, the break was rotated clockwise 1 to 2 degrees. The interesting thing is that there are alignment marks on both pieces that were apparently not used during assembly. I may have been able to correct the alignment; but with the rust and the poor finish, including burrs and incomplete machining of several of the ports, I returned it.

VERY DISAPPOINTED (03.11.2016)

Highly disappointed!! The muzzle brake I recieved had large amounts of rust on one side, enough that the bag it came in was stained orange. Also there are some scratches. Much like one of the other reviews on this brake mine is also a 2 piece design, both pieces have alignment marks and they are not properly aligned. My biggest issue is the large amount of rust, like it sat in water. Will exchange this one and see how the second one looks.

<img width="500" src='/userdocs/reviewimages/275fafcf-230a-4720-a9c5-6e5bf85ca88b.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/568e58d2-9d4c-40c6-907a-24590b601435.jpg' alt=''>

Settled down the recoil (17.11.2017)

I've got this on my Springfield standard M1A.

Fits on my rifle just fine, turned that recoil down to 3 from a 7, and it looks good.

The timing with the set screw was off a bit so I can't get it in the recess of the castle nut however the set screw it like extra insurance tighten the castlenut to proper and it'll be fine.

Other reviews stated that it was rusty and rusts quickly, my experience with the piece was it came with one small spot with rust. I cleaned and protected it with CLP end of my rusty woes. That was 8 months ago. Also congrats on owning an M1A. I haven't cleaned mine since I put this on it still runs no problems at all!

Les 7 flere anmeldelser fra brownells.com

3499 3499 1 NOK

Produktnr.: 851100014
SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE
Produsentnr.: 2001 Lar deg bruke mer tid på å øve med ditt favoritt høyeffekts konkurransegevær uten rekyl. Absolutt ingen behov for børsemakertjenester for fantastisk munningskontroll og sterkt redusert følt rekyl selv på helautomatiske rifler. Endrer den skarpe rekyl som de fleste skyttere opplever med militær standard til et mykt dytt. Erstatter enkelt den originale flammedemperen uten modifikasjoner og inkluderer kornets spor og låsemutterens innstillingsskrue.

3499 NOK 27 kr 3 499,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Finish: Manganese Phosphate Kaliber: 30 Caliber (.308) Make: Springfield Material: Stainless Steel Modell: M14, M1A Størrelse: .862 Threads: .595-32

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Ingen behov for børsemakertjenester for å oppnå fantastisk munningskontroll og redusert følt rekyl.
Erstatter enkelt den originale flammedemperen uten modifikasjoner, inkludert kornets spor og låsemutterens innstillingsskrue.
Maskinert stål med manganfosfat finish, 3" lang, .862" diameter, og veier 4.3 oz.

Attributes

Finish: Manganese Phosphate Gjenger: .595-32 Kaliber: 30 Caliber (.308) Make: Springfield Material: Stainless Steel Modell: M14,M1A Size: .862 Leveringsvekt: 0,136kg Frakthøyde: 23mm Fraktbredde: 25mm Fraktlengde: 94mm

Elementdetaljer

Made in USA

Opplev forbedret munningskontroll med Springfield M14 Muzzle Brake! 🚀 Reduser rekyl og øk presisjonen på ditt konkurransegevær.

Drop-On Recoil & Muzzle Control; Fits Domestic & Chinese M14/M1A's

Note: Will NOT fit Norinco/Polytech (M305) with M15x.75 thread.

SPECS: Machined steel, manganese phosphate finish. 3" (7.6cm) long, .862" (21mm) diameter, 4.3 oz. (123 g.) wt.

Mer...

Enkel Påmontering for Rekyl & Munningskontroll; Passer til Både Innenlandske & Kinesiske M14/M1A's

Merk: Passer IKKE til Norinco/Polytech (M305) med M15x.75 gjenger.

SPECS: Maskinert stål, manganfosfat finish. 3" (7.6cm) lang, .862" (21mm) diameter, 4.3 oz. (123 g.) vekt.

Mer...

Kundevurderinger for SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 3,9

Great Product (22.12.2010)

Easy to intsall. Intsalled it on my Chicom M14. Recoil feels like a 5.56 mm.

Great Product (08.03.2011)

Installed in minutes. Installed using only castle nut pliers, No allignment tool needed. Works as described, reducing recoil and muzzle flip.

Best Brake I've ever seen (19.10.2011)

Reduces muzzle climb to Nil.
A felt reduction in recoil.

I noticed an improvement in accuracy immediately. This is the best brake for the m14/m1a I have seen.

Smooth recoil (11.04.2014)