Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

SINCLAIR INTERNATIONAL
SINCLAIR CASE MOUTH DEBURRING TOOL HOLDER

749004354

Remove burrs from your cases efficiently with the Sinclair Deburring Tool Holder and your case mouth deburring tool. Use in a drill or power screwdriver to quickly debur your case mouths. The stainless steel holder will work with L.E. Wilson deburring tools, current Forster deburring tools. The Sinclair Deburring Tool Holder and the L.E. Wilson Case Mouth Deburring Tool are available together in a package that saves you 15 percent versus purchasing them seperately (05-150).

Mer...

Fjern grader fra hylsene dine effektivt med Sinclair Deburring Tool Holder og ditt verktøy for avgrading av hylsemunning. Brukes i en drill eller elektrisk skrutrekker for å raskt avgradere hylsemunningene dine. Holderen i rustfritt stål vil fungere med avgradingsverktøy fra L.E. Wilson, gjeldende Forster avgradingsverktøy. Sinclair Deburring Tool Holder og L.E. Wilson Case Mouth Deburring Tool er tilgjengelig sammen i en pakke som sparer deg for 15 prosent sammenlignet med å kjøpe dem separat (05-150).

Mer...

Kundevurderinger for SINCLAIR INTERNATIONAL L.E. WILSON DEBURRING TOOL WITH HOLDER

Antall vurderinger: 9
Fra brownells.com: 8
Gjennomsnittsvurdering: 4,1

Works great with Sinclair power center (19.02.2013)

Nice tool. Chucking it up in the Sinclair power center made for the nicest deburring session I've ever had. Darn near effortless.

Do need to keep an eye on how long you hold the case in there with it under power.

Wrong dimensions (05.05.2015)

Holder will only accept chamfer end of L.E. Wilson tool which measures .621. The deburring end of the Wilson tool measures

.6235 and will not enter the holder.

Excellent tool (11.03.2016)

This is great combo. The Wilson deburr tool is very nicely made and sharp. The holder is also really nicely made, with unusually good attention to detail.

Thanks, Sinclair, for offering a unique product.

needed some fitting (19.12.2011)

The description says that the RCBS tool will fit, but my RCBS case mouth chamfer/deburr tool didn't quite fit in this adapter. I chucked the RCBS tool in my drill by the pin on the outside deburring end and spun it while using sandpaper on the tool. This got me pretty close, but it was still a little too tight and required pliers to switch tool ends. I ended up using a fine grit sanding drum on my rotary tool inside the Sinclair adapter to smooth the inside out just a little bit and now it's easy to remove the RCBS tool to switch ends, but still has a snug fit. If it had've fit this good out of the box, it would've gotten 5 stars, but the fitting was a bit annoying. I'd probably still buy again.

AN UNBIASED TOOL REVIEW (07.01.2014)

SUPER NICE & WELL MADE TOOL TO HOLD YOUR DEBURRING TOOL FOR SPINNING WITH A DRILL. HOWEVER, IT WILL NOT EASILY FIT THE "RCBS" DEBURRING TOOL. THE "ID" OF THE HOLDER WILL HAVE TO BE ENLARGED OR THE "OD" OF THE DEBURRING TOOL REDUCED A FEW THOUSANDTHS TO ACHIEVE A PROPER FIT. ANOTHER OPTION WOULD BE TO SIMPLY ORDER A "WILSON" DEBURRING TOOL IF YOU DO NOT ALREADY OWN ONE.

Perfect!! (19.08.2015)

Not sure why some people give it 2 stars when they're trying to use the wrong deburring tool inside... It's made for the Wilson deburring tool, and fits 100% perfectly, and works GREAT!!!

One of the best tools I've ever bought (03.12.2016)

Deburring and chamfering were my least favorite operations of case prep. Now they're a breeze. Just make sure you follow the recommendation an use a Wilson chamfering tool, which I already had. I used to get the worst hand cramps when I would twist the chamfering tool by hand. This holder eliminates that and is much faster to boot! I have mine inserted into my B&D cordless screwdriver, but a drill works too. I just wish I had purchased one of these years ago.

Just what I was looking for! (14.07.2018)

I purchased this item to use with my L.E. Wilson inside/outside 45 degree chamfer tool. It works like it was made for it, which of course it was! There are chamfer tools with a round shaft that will work in a drill press, but the gun sites don't seem to carry them any more. This adapter allows you to do that with the combo tool.

I use it to chamfer the throat of the chamber on black powder reproduction/replica guns cylinders. Makes for easy starting the round balls, and less lead shaving. Brownells also sells a 45 degree brass lapping tool that does have the drill press stem. Use this with their lapping compound to get a smooth finish. See picture.

<img width="500" src='/userdocs/reviewimages/d73f62e7-53a2-4082-a17c-3a19a8e9823b.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/abadad29-5295-4b2d-b9cd-b014cd0478a6.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/8d0d7a87-0f01-448c-a5db-857db700ff9e.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/cd9f8a9c-221c-463b-b2d8-9de3bd132a99.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/374ff11e-4de2-4e47-a8b5-9ed2f2992c65.jpg' alt=''>

Fungerer supert! (08.01.2017)

Monteres på en borrmaskin og gjør jobben med å deburre mye lettere! Kunne gjerne kostet mindre, men er verd pengene!

Les 8 flere anmeldelser fra brownells.com

269 949 2 NOK

Produktnr.: 749004354
SINCLAIR INTERNATIONAL L.E. WILSON DEBURRING TOOL WITH HOLDER
Produsentnr.: 05150 Fjern grader fra hylsene dine effektivt med Sinclair Deburring Tool Holder og ditt verktøy for avgrading av hylsemunning. Brukes i en drill eller elektrisk skrutrekker for å raskt avgradere hylsemunningene dine. Holderen i rustfritt stål vil fungere med avgradingsverktøy fra L.E. Wilson, gjeldende Forster avgradingsverktøy. Sinclair Deburring Tool Holder og L.E. Wilson Case Mouth Deburring Tool er tilgjengelig sammen i en pakke som sparer deg for 15 prosent sammenlignet med å kjøpe dem separat (05-150).

949 NOK 3 kr 949,00 *

Leveringstid ca. 14-21 dager.
3 stk. på lageret i USA

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Effektiv fjerning av grader fra hylser med Sinclair Deburring Tool Holder og L.E. Wilson Case Mouth Deburring Tool.
Kan brukes i en drill eller elektrisk skrutrekker for rask avgrading av hylsemunninger.
Spar 15 prosent ved å kjøpe holderen og avgradingsverktøyet sammen som en pakke (05-150).

Attributes

Leveringsvekt: 0,145kg Frakthøyde: 13mm Fraktbredde: 102mm Fraktlengde: 152mm

Elementdetaljer

Made in USA

Sale

Produktnr.: 749002628
SINCLAIR INTERNATIONAL SINCLAIR CASE MOUTH DEBURRING TOOL HOLDER
Produsentnr.: 05110 Fjern grader fra hylsene dine effektivt med Sinclair Deburring Tool Holder og ditt verktøy for avgrading av hylsemunning. Brukes i en drill eller elektrisk skrutrekker for å raskt avgradere hylsemunningene dine. Holderen i rustfritt stål vil fungere med avgradingsverktøy fra L.E. Wilson, gjeldende Forster avgradingsverktøy. Sinclair Deburring Tool Holder og L.E. Wilson Case Mouth Deburring Tool er tilgjengelig sammen i en pakke som sparer deg for 15 prosent sammenlignet med å kjøpe dem separat (05-150).

269 NOK 4 kr 269,00 * kr 359,00
Kun 1 stk. tilgjengelig til denne prisen

Leveringstid ca. 2-4 dager.
1 stk. i det lokale lageret
4 stk. på lageret i USA

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Effektiviser avgradering av hylsemunningene dine med Sinclair Deburring Tool Holder. 🛠️ Spar 15% når du kjøper sammen med L.E. Wilson verktøy!

Mer...

Kundevurderinger for SINCLAIR INTERNATIONAL L.E. WILSON DEBURRING TOOL WITH HOLDER

Antall vurderinger: 9
Fra brownells.com: 8
Gjennomsnittsvurdering: 4,1

Works great with Sinclair power center (19.02.2013)

Wrong dimensions (05.05.2015)

Holder will only accept chamfer end of L.E. Wilson tool which measures .621. The deburring end of the Wilson tool measures

.6235 and will not enter the holder.

Excellent tool (11.03.2016)

needed some fitting (19.12.2011)

AN UNBIASED TOOL REVIEW (07.01.2014)

Perfect!! (19.08.2015)

Not sure why some people give it 2 stars when they're trying to use the wrong deburring tool inside... It's made for the Wilson deburring tool, and fits 100% perfectly, and works GREAT!!!

One of the best tools I've ever bought (03.12.2016)