Dial Caliper Body for your Modular Headspace Comparator assembly. Now available with 2 mounting configurations: “Centered” for normal use, “Offset” for use with Hornady COAL Tools. ***Body is required to use Bullet and Headspace Inserts*** This is the body only for the Modular Headspace Comparator tool. You must purchase the body for the Modular Headspace Comparator inserts to work. Available in two configurations. Standard: The longest of the two configurations, works with loaded ammunition up to 338 Lapua Magnum with solid turned bullets. Short: The shortest body of the two configurations. More compact when the customer wants to dedicate a body for measuring fired brass or bullets only. Made from 6061 Aluminum made in the U.S.A. these bodies clamp onto your dial calibers allowing the Headspace and Bullet inserts to be changed quickly with the use of any tools. Both Standard and Short Modular Headspace Comparator Bodies have two clamping configurations when mounting to your dial calipers. Configuration “C”: Centered With the 10/32 Thumb Screw mounted on the bottom side with a “C” means that the Modular Headspace Comparator Body will be centered on the dial calipers. This is standard for all normal uses. Configuration “O”: Offset With the 10/32 Thumb Screw mounted on the bottom side with a “O” means that the Modular Headspace Comparator Body will be offset on the dial calipers. When using the Hornady COAL measuring tools, the Modular Headspace Comparator body must be offset on the dial calipers in order for the Hornady tool to be properly aligned with the Modular Headspace Comparator assembly.
Dial Caliper Body for din modulære Headspace Comparator-assemblage. Nå tilgjengelig med 2 monteringskonfigurasjoner: "Sentral" for normal bruk, "Offset" for bruk med Hornady COAL-verktøy. ***Kroppen er nødvendig for å bruke Bullet og Headspace Inserts*** Dette er kun kroppen for det modulære Headspace Comparator-verktøyet. Du må kjøpe kroppen for at de modulære Headspace Comparator-innsatsene skal fungere. Tilgjengelig i to konfigurasjoner. Standard: Den lengste av de to konfigurasjonene, fungerer med ladet ammunisjon opp til 338 Lapua Magnum med solide dreide kuler. Kort: Den korteste kroppen av de to konfigurasjonene. Mer kompakt når kunden ønsker å dedikere en kropp for å måle brennte hylser eller kuler kun. Laget av 6061 aluminium laget i USA, disse kroppene klemmes på dine dial-calipere, slik at Headspace og Bullet-innsatsene kan byttes raskt uten bruk av verktøy. Både Standard og Kort modulære Headspace Comparator-kropper har to klemkonfigurasjoner når de monteres på dine dial-calipere. Konfigurasjon "C": Sentral Med 10/32 tommel skrue montert på undersiden med en "C" betyr at den modulære Headspace Comparator-kroppen vil være sentrert på dial-caliperne. Dette er standard for all normal bruk. Konfigurasjon "O": Offset Med 10/32 tommel skrue montert på undersiden med en "O" betyr at den modulære Headspace Comparator-kroppen vil være offset på dial-caliperne. Når du bruker Hornady COAL-målverktøyene, må den modulære Headspace Comparator-kroppen være offset på dial-caliperne for at Hornady-verktøyet skal være riktig justert med den modulære Headspace Comparator-assemblagen.