Lightweight Titanium Striker reduces lock time by a minimum of 50% for a faster shot and improved accuracy. Drops in with no gunsmithing and no permanent alterations to the firearm required. CNC machined from titanium and hardened for long lasting performance. Lightweight Steel Striker is 32% lighter than factory part, heat treated for exceptional strength and performance with hot loads. Coated with Kolene Nutride for greater lubricity and corrosion resistance. All models include Wolff striker spring.
SPECS: Solid titanium, TiN coated, gold, heat treated. Small Frame fits GLOCK 9mm/.40 S&W. Steel Striker, EDT150 tool steel, heat treated to Rc 70.
Mer...
Reduserer Låsetid Med 50% I GLOCKS~
Lettvekts Titanium Slagstift reduserer låsetid med minst 50% for et raskere skudd og forbedret nøyaktighet. Kan enkelt settes inn uten behov for børsemaker og ingen permanente endringer på våpenet er nødvendig. CNC-maskinert fra titanium og herdet for langvarig ytelse. Lettvekts Stål Slagstift er 32% lettere enn fabrikkdelen, varmebehandlet for enestående styrke og ytelse med kraftige ladninger. Belagt med Kolene Nutride for bedre smøreevne og korrosjonsmotstand. Alle modeller inkluderer Wolff slagfjær.
SPECS: Solid titanium, TiN-belagt, gullfarget, varmebehandlet. Small Frame passer til GLOCK 9mm/.40 S&W. Stål Slagstift, EDT150 verktøystål, varmebehandlet til Rc 70.
Mer...
Kundevurderinger for LIGHTNING STRIKE STEEL SMALL FRAME STRIKER FOR GLOCK®
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,7
Not a drop in, but works once fitted(10.10.2010)
If you're not prepared to spend an hour or more with a stone and polishing wheel, this isn't for you. Out of curiosity, I found it wouldn't drop in half the Glocks I put it in. In the one I finally fitted it to, it originally increased the trigger pull weight to a gritty 6 lbs from snappy 3 lbs with factory striker. After fitting, it's about 3 lbs again. It's definitely less mass than the factory striker, and with lighter springs it provides reliable ignition.
Works well in 3rd Gen G17(22.01.2018)
Iâved use the âSteelâ striker in (4) 3rd Gen guns and have had great sucess. Teamed with a fitted trigger bar and firing pin block, this striker makes a good improvement over the factory MIM part.
Trigger Job(20.01.2011)
This is the second part of my personal trigger job on my Glocks. Easy install and have had no problem.
A huge compliment to any trigger job!(02.06.2011)
What it does:lighter striker=faster speed.Because it comes w/lighter Wollf spring to help reduce trigger pull,this pair of parts still hits primers with as much force as stock, maybe more.For sake of comparison,stock striker & spring is a 230grn bullet moving @ 800fps..This pair of parts is represented by a 180grn bullet @ 1180fps.Both are .45acp, but the lighter bullet actually carries more ft.lbs. of impact force! The lighter rate,trigger friendly spring is able to strike and ignite primers with as much force as the much heavier stock striker and spring.It also quiets and reduces dry-fire vibrations.T.P.D.A. strongly recommends using a stiffer replacement trigger spring (the 30% by Glokworx is perfect)with this product.Also look at the Lightning Strike safety plunger and a 3.5lb. connector for a full job. If you have any $ left, the trigger itself can be replaced. Lightning Strike makes a nice one. Lone Wolf makes one with a built in 'safe/fire' button. PS-to break down stock striker in order to re-use plastics.Relieve spring pressure on bullet striking end,the small black plastic bushing is 2 piece and sandwiches pin. PSS-Looks as if should be long-lasting if you don't constantly dry-fire.
Noticable difference!(28.02.2013)
Noticable difference in dry fire, weight, and striking of primer. Vibrations during dry fire with stock striker are abundant, but with this firing pin you will notice the difference immediately (for the everyday intermediate to advanced shooter). Weight is also cut dramatically from the stock to this aftermarket piece. I use this in my glock 21SF and it fits perfectly.
Excellent product for competition(17.03.2010)
Really makes a difference in the Glock trigger system especially when used with the corresponding Lightning Strike Titanium Safety Plunger 642-102-021 and Semi Auto Aluminum Trigger 642-103-001.
Trigger Job(20.01.2011)
This is the second part of my personal trigger job on my Glocks. Easy install and never have had any problems.
Produktnr.: 642104001 LIGHTNING STRIKE STEEL SMALL FRAME STRIKER FOR GLOCK® Produsentnr.: 7920 Lettvekts Titanium Slagstift reduserer låsetid med minst 50% for et raskere skudd og forbedret nøyaktighet. Kan enkelt settes inn uten behov for børsemaker og ingen permanente endringer på våpenet er nødvendig. CNC-maskinert fra titanium og herdet for langvarig ytelse. Lettvekts Stål Slagstift er 32% lettere enn fabrikkdelen, varmebehandlet for enestående styrke og ytelse med kraftige ladninger. Belagt med Kolene Nutride for bedre smøreevne og korrosjonsmotstand. Alle modeller inkluderer Wolff slagfjær.
1949NOK2kr 1 949,00
*
Leveringstid ca. 14-21 dager. 2 stk. på lageret i USA
Spesifikasjoner:Kaliber: 9 mm (.355-.356), 40/10 mm (.400-.401)Make: GlockModell: Universal Handguns
Lettvekts Titanium Slagstift reduserer låsetid med minst 50%, noe som gir raskere skudd og forbedret nøyaktighet.
Kan enkelt settes inn uten behov for børsemaker og krever ingen permanente endringer på våpenet.
CNC-maskinert fra titanium og herdet for langvarig ytelse, med Kolene Nutride belegg for bedre smøreevne og korrosjonsmotstand.
Attributes
Kaliber:
9 mm (.355-.356),40/10 mm (.400-.401)
Make:
Glock
Modell:
Universal Handguns
Leveringsvekt: 0,009kgFrakthøyde: 8mmFraktbredde: 79mmFraktlengde: 170mm
Elementdetaljer
Made in USA
US eksport klassifisering: 0A501.x
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr.: 642100001 LIGHTNING STRIKE TITANIUM SMALL FRAME STRIKER Produsentnr.: LS7923 Lettvekts Titanium Slagstift reduserer låsetid med minst 50% for et raskere skudd og forbedret nøyaktighet. Kan enkelt settes inn uten behov for børsemaker og ingen permanente endringer på våpenet er nødvendig. CNC-maskinert fra titanium og herdet for langvarig ytelse. Lettvekts Stål Slagstift er 32% lettere enn fabrikkdelen, varmebehandlet for enestående styrke og ytelse med kraftige ladninger. Belagt med Kolene Nutride for bedre smøreevne og korrosjonsmotstand. Alle modeller inkluderer Wolff slagfjær.
2649NOK2kr 2 649,00
*
Leveringstid ca. 14-21 dager. 2 stk. på lageret i USA
Spesifikasjoner:Kaliber: 9 mm (.355-.356), 40/10 mm (.400-.401)Make: GlockModell: Universal Handguns
Lightweight Titanium Striker reduces lock time by a minimum of 50% for a faster shot and improved accuracy. Drops in with no gunsmithing and no permanent alterations to the firearm required. CNC machined from titanium and hardened for long lasting performance. Lightweight Steel Striker is 32% lighter than factory part, heat treated for exceptional strength and performance with hot loads. Coated with Kolene Nutride for greater lubricity and corrosion resistance. All models include Wolff striker spring.
SPECS: Solid titanium, TiN coated, gold, heat treated. Small Frame fits GLOCK 9mm/.40 S&W. Steel Striker, EDT150 tool steel, heat treated to Rc 70.
Mer...
Reduserer Låsetid Med 50% I GLOCKS~
Lettvekts Titanium Slagstift reduserer låsetid med minst 50% for et raskere skudd og forbedret nøyaktighet. Kan enkelt settes inn uten behov for børsemaker og ingen permanente endringer på våpenet er nødvendig. CNC-maskinert fra titanium og herdet for langvarig ytelse. Lettvekts Stål Slagstift er 32% lettere enn fabrikkdelen, varmebehandlet for enestående styrke og ytelse med kraftige ladninger. Belagt med Kolene Nutride for bedre smøreevne og korrosjonsmotstand. Alle modeller inkluderer Wolff slagfjær.
SPECS: Solid titanium, TiN-belagt, gullfarget, varmebehandlet. Small Frame passer til GLOCK 9mm/.40 S&W. Stål Slagstift, EDT150 verktøystål, varmebehandlet til Rc 70.
Mer...
Kundevurderinger for LIGHTNING STRIKE STEEL SMALL FRAME STRIKER FOR GLOCK®
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,7
Not a drop in, but works once fitted(10.10.2010)
If you're not prepared to spend an hour or more with a stone and polishing wheel, this isn't for you. Out of curiosity, I found it wouldn't drop in half the Glocks I put it in. In the one I finally fitted it to, it originally increased the trigger pull weight to a gritty 6 lbs from snappy 3 lbs with factory striker. After fitting, it's about 3 lbs again. It's definitely less mass than the factory striker, and with lighter springs it provides reliable ignition.
Works well in 3rd Gen G17(22.01.2018)
Iâved use the âSteelâ striker in (4) 3rd Gen guns and have had great sucess. Teamed with a fitted trigger bar and firing pin block, this striker makes a good improvement over the factory MIM part.
Trigger Job(20.01.2011)
This is the second part of my personal trigger job on my Glocks. Easy install and have had no problem.
A huge compliment to any trigger job!(02.06.2011)
What it does:lighter striker=faster speed.Because it comes w/lighter Wollf spring to help reduce trigger pull,this pair of parts still hits primers with as much force as stock, maybe more.For sake of comparison,stock striker & spring is a 230grn bullet moving @ 800fps..This pair of parts is represented by a 180grn bullet @ 1180fps.Both are .45acp, but the lighter bullet actually carries more ft.lbs. of impact force! The lighter rate,trigger friendly spring is able to strike and ignite primers with as much force as the much heavier stock striker and spring.It also quiets and reduces dry-fire vibrations.T.P.D.A. strongly recommends using a stiffer replacement trigger spring (the 30% by Glokworx is perfect)with this product.Also look at the Lightning Strike safety plunger and a 3.5lb. connector for a full job. If you have any $ left, the trigger itself can be replaced. Lightning Strike makes a nice one. Lone Wolf makes one with a built in 'safe/fire' button. PS-to break down stock striker in order to re-use plastics.Relieve spring pressure on bullet striking end,the small black plastic bushing is 2 piece and sandwiches pin. PSS-Looks as if should be long-lasting if you don't constantly dry-fire.
Noticable difference!(28.02.2013)
Noticable difference in dry fire, weight, and striking of primer. Vibrations during dry fire with stock striker are abundant, but with this firing pin you will notice the difference immediately (for the everyday intermediate to advanced shooter). Weight is also cut dramatically from the stock to this aftermarket piece. I use this in my glock 21SF and it fits perfectly.
Excellent product for competition(17.03.2010)
Really makes a difference in the Glock trigger system especially when used with the corresponding Lightning Strike Titanium Safety Plunger 642-102-021 and Semi Auto Aluminum Trigger 642-103-001.
Trigger Job(20.01.2011)
This is the second part of my personal trigger job on my Glocks. Easy install and never have had any problems.