Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

45™ NO GUNSMITHING

957201100

If you have and older Ruger® MKI, MKII™ MK4 that's not drilled and tapped you can install this WEIG-A-TINNY® Scopemount without making any permanent alterations to your favorite pistol. Remove the rear sight, insert the threaded dovetail filler and install the mount with the screws provided. Accepts all Weaver style rings and accessories and most Picatinny rings and accessories. 5-1/4" long, silver or Black, matte anodized finish, weighs 2.5 ounces.

Mer...

Hvis du har en eldre Ruger® MKI, MKII™ MK4 som ikke er boret og gjengesnittet, kan du installere dette WEIG-A-TINNY® Scopemount uten å foreta noen permanente endringer på din favorittpistol. Fjern baksiktet, sett inn den gjengede skinnen og installer festet med skruene som følger med. Aksepterer alle Weaver-stil ringer og tilbehør og de fleste Picatinny-ringer og tilbehør. 5-1/4" lang, sølv eller svart, matt anodisert finish, veier 2,5 unser.

Mer...

Kundevurderinger for WEIGAND COMBAT RUGER MK I, MK II, 22/451-PIECE BASE, SILVER

Antall vurderinger: 5
Fra brownells.com: 5
Gjennomsnittsvurdering: 4,6

Gunsmith's Dream (04.11.2009)

The answer to mounting optics to Ruger MK I & MK II Pistols that are not drilled & taped at the factory (non adjustable sights). Just knock out the old sight install the provided dovetailed insert in it's place and fasten on the new base. Doesn't get any more simple than this and the base looks "like it belongs there". No modification to the receiver required.

Good Moiunt (19.12.2009)

I like everything about this mount except it is very tall. Raises the scope center point high above the bore center. This is not such a problem at long range but makes short range shooting more complicated (hold over changes drastically at short ranges.) Mid range trajectory goes higher above sight line than if sight were closer to bore center line. I think they could make this mount thinner. Overall well made, easy to install and solid well engineered. I would buy this again. Slight filing on the steel dovetail mounting block was required. A few light passes is all it took on mine. Tapped it into polace with brass punch.

Easy to Install - Solid Mount (14.02.2011)

I installed this mount on my Ruger 22/45 Target Model, and it went on with no issues. The mount is well finished and machined, and goes on without issue. Tap out existing rear sight with a no-mar removal tool or punch, insert the dovetail base, then attached with the provided screws. I mounted a Burris Fastfire II to it with no issues - works nicely and looks great. Main comment is that it would have been nice if an allen wrench (microscopic size) for the set screws for the base were included in the kit, but I managed to find one to fit them. I would recommend this mount for small red dot sights and very small handgun scopes, due to lack of front tie down screw (but no gunsmithing mods are needed with this rail!). Good product.

Great Service and Great Mount (31.05.2012)

Received the mount in 2 days! It fits exactly as stated. Just a slight tap from a small hammer and it went into the dovetail on my Ruger Mark I. You'll need a couple of Allen wrenches but we all have them anyway. I also used Locktite. Great product to mount a red dot scope on the pistol.

The way to go (22.04.2016)

As advertised, if you have a Ruger Mark I or Mark II and don't want to spend a lot of money having it drilled and tapped for a red dot or scope this is the way to go. Very good directions, simple to install and looks very good. I installed it on a Mark II, put a red dot on it, sighted it in and shot 100 rounds (at customer's request) with no movement of the rail. I call that "very good".

Les 5 flere anmeldelser fra brownells.com

1149 1149 2 NOK

Produktnr.: 957201100
WEIGAND COMBAT RUGER MK I, MK II, 22/451-PIECE BASE, SILVER
Produsentnr.: RM2SM Hvis du har en eldre Ruger® MKI, MKII™ MK4 som ikke er boret og gjengesnittet, kan du installere dette WEIG-A-TINNY® Scopemount uten å foreta noen permanente endringer på din favorittpistol. Fjern baksiktet, sett inn den gjengede skinnen og installer festet med skruene som følger med. Aksepterer alle Weaver-stil ringer og tilbehør og de fleste Picatinny-ringer og tilbehør. 5-1/4" lang, sølv eller svart, matt anodisert finish, veier 2,5 unser.

1149 NOK 1 kr 1 149,00 *

Leveringstid ca. 14-21 dager.
1 stk. på lageret i USA

Spesifikasjoner: Farge: Silver Make: Ruger Material: Aluminum Modell: Mark II Number of Bases: 1-Piece Style: Weaver-Style Bases

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Kan installeres uten permanente endringer på Ruger® MKI, MKII™ MK4 som ikke er boret og gjengesnittet.
Aksepterer alle Weaver-stil ringer og tilbehør samt de fleste Picatinny-ringer og tilbehør.
5-1/4" lang, sølv eller svart, matt anodisert finish, veier 2,5 unser.

Attributes

Farge: Silver Make: Ruger Material: Aluminum Modell: Mark II Number of Bases: 1-Piece Style: Weaver-Style Bases Leveringsvekt: 0,045kg Frakthøyde: 15mm Fraktbredde: 89mm Fraktlengde: 170mm

Elementdetaljer

Made in USA

Produktnr.: 957000035
WEIGAND COMBAT RUGER MK I, MK II, 22/451-PIECE BASE, BLACK
Produsentnr.: RM2SMB Hvis du har en eldre Ruger® MKI, MKII™ MK4 som ikke er boret og gjengesnittet, kan du installere dette WEIG-A-TINNY® Scopemount uten å foreta noen permanente endringer på din favorittpistol. Fjern baksiktet, sett inn den gjengede skinnen og installer festet med skruene som følger med. Aksepterer alle Weaver-stil ringer og tilbehør og de fleste Picatinny-ringer og tilbehør. 5-1/4" lang, sølv eller svart, matt anodisert finish, veier 2,5 unser.

1149 NOK 4 kr 1 149,00 *

Leveringstid ca. 14-21 dager.
4 stk. på lageret i USA

Spesifikasjoner: Farge: Black Make: Ruger Material: Aluminum Modell: Mark II Number of Bases: 1-Piece Style: Weaver-Style Bases

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Oppgrader din Ruger® MK I/II/22/45™ med WEIGANDs sølv scopemount ✨. Ingen gunsmithing nødvendig, enkel installasjon og kompatibel med Weaver-stil ringer.