Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

45™ TARGET TRIGGER

810162012441 930000123

Drop-In Trigger Job For .22 Pistols

Precision machined from billet for precise fit to cut down trigger weight and eliminate the heavy pressure required to move the factory part. Helps produce a more consistent pull for improved accuracy. Stop screw is adjustable for overtravel and pretravel with the gun fully assembled, so you get a no-creep pull. Ultra-smooth shoe offers more contact with the trigger finger. Available in Black anodized aluminum or polished stainless steel (SS). Includes trigger spring and trigger spring plunger.

SPECS: Aluminum, anodized, black, or stainless steel, natural silver finish. .354" (9mm) wide trigger shoe face. Fits Ruger Mark I, Mark II, Mark III, and 22/45 pistols.

Mer...

Drop-In Avtrekkerjobb for .22 Pistoler

Presisjonsmaskinert fra billet for nøyaktig passform for å redusere avtrekkervekt og eliminere det tunge trykket som kreves for å flytte fabrikkdelen. Hjelper med å produsere en mer konsekvent avtrekk for forbedret nøyaktighet. Stoppeskruen kan justeres for overtrekk og fortrekk med pistolen fullt montert, slik at du får et avtrekk uten kryp. Ultramyk sko gir mer kontakt med avtrekkerfingeren. Tilgjengelig i svart anodisert aluminium eller polert rustfritt stål (SS). Inkluderer avtrekkerfjær og avtrekkerfjærstøtter.

SPECS: Aluminium, anodisert, svart, eller rustfritt stål, naturlig sølvfinish. .354" (9mm) bredt avtrekkerskoansikt. Passer til Ruger Mark I, Mark II, Mark III og 22/45 pistoler.

Mer...

Kundevurderinger for VOLQUARTSEN RUGER® TARGET TRIGGER, SS

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,4

Far better than their aluminum trigger (25.02.2012)

Overall better fit and finish than the aluminum Volquartsen trigger. I highly recommend this over either the Ruger factory of Volquartsen aluminum trigger.

Nice touch for Mark III (08.03.2012)

The set screw on the back of the trigger is to short ,, needs to be about .070 longer. Other than that its really good . I would buy it again .

Money Well Spent!!! (08.05.2014)

High quality fit and finish. My only gripe is there aren't any instructions on the proper way to adjust the trigger. None with the product or on the company's web site. I wasn't too hard to figure out though. My original trigger pull was a creepy 4&1/4Lbs, this trigger and their replacement sear brought it down to 1&3/4Lbs. very crisp and no creep!

VOLQUARTSEN MK322/45 Trigger (14.05.2014)

I purchased the Ruger 3903 22/45 a month ago, great gun, but it came with one major factory flaw (the mag. disconnect), and one minor flaw the trigger. The trigger had way too much trvel in it, and the pounage was a bit high, so I order this trigger, and handed over to my son AJ. To my surprise he had it changed out, the bushing put in for the disconnect problem, and every thing polished up in no time. He gave me my gun back, and it was like a whole new gun, what a differance in the trigger travel, and even less poundage too boot. The gun is more accurate because of the good crisp trigger, without a good trigger your done for, and the VOLQUARTSEN deffinetly did as promised.
Tom

Better have extra set screws (15.09.2011)

Trigger works as advertised and is easy to install, but set screws for trigger stop and pre-travel are too short. Especially the one used as a trigger stop. At proper adjustment for trigger stop only a couple of threads are engaged and it is almost impossible to get a satisfactory setting with the supplied set screw. Of course you don't know this prior to installation, so it becomes a PIA to replace them with longer ones. Be aware of this and have a couple of longer ones on hand before attempting installation. Too bad Volquartsen doesn't furnish a couple of different length set screws to solve this problem, they ain't that expensive considering the cost of the trigger.

Works like a dream (10.03.2012)

Trigger works great ,looks good. But the set screw on the stop ( the one right behind your trigger finger is to short needs to be .312 long 8-32 by .312 long )

Works very well. (02.05.2013)

This trigger did a very nice job of transforming my MKIII into a real tack driver. I installed it with the Volquartsen sear and a Majestic Arms 3.2 Speed Strip kit. The trigger feel after the conversion is very good. Volquartsen must be listening because my trigger came with two lengths of overtravel screw. The Volquartsen installation videos on YouTube are not useful, but there are some very good videos to guide you through the installation. I highly recommend this upgrade to your Mark series Ruger.

Les 7 flere anmeldelser fra brownells.com

899 1099 2 NOK

Produktnr.: 930000123
VOLQUARTSEN RUGER® TARGET TRIGGER, SS
Produsentnr.: VC2TT-ST 810162012441 Presisjonsmaskinert fra billet for nøyaktig passform for å redusere avtrekkervekt og eliminere det tunge trykket som kreves for å flytte fabrikkdelen. Hjelper med å produsere en mer konsekvent avtrekk for forbedret nøyaktighet. Stoppeskruen kan justeres for overtrekk og fortrekk med pistolen fullt montert, slik at du får et avtrekk uten kryp. Ultramyk sko gir mer kontakt med avtrekkerfingeren. Tilgjengelig i svart anodisert aluminium eller polert rustfritt stål (SS). Inkluderer avtrekkerfjær og avtrekkerfjærstøtter.

1099 NOK 2 kr 1 099,00 *

Leveringstid ca. 14-21 dager.
2 stk. på lageret i USA

Spesifikasjoner: Finish: Stainless Steel Make: Ruger Modell: Mark III, Mark I, Mark II Style: Adjustable, Drop-In, Curved

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Presisjonsmaskinert for å redusere avtrekkervekt og forbedre nøyaktigheten.
Justerbar stoppeskrue for overtrekk og fortrekk, gir avtrekk uten kryp.
Tilgjengelig i svart anodisert aluminium eller polert rustfritt stål (SS).

Attributes

Finish: Stainless Steel Make: Ruger Modell: Mark I,Mark II,Mark III Style: Adjustable,Curved,Drop-In Leveringsvekt: 0,023kg Frakthøyde: 15mm Fraktbredde: 71mm Fraktlengde: 86mm UPC : 810162012441

Elementdetaljer

Made in USA
US eksport klassifisering: 0A501.c

Produktnr.: 930012002
VOLQUARTSEN RUGER® TARGET TRIGGER, BLACK
Produsentnr.: VC2TT 810162011475 Presisjonsmaskinert fra billet for nøyaktig passform for å redusere avtrekkervekt og eliminere det tunge trykket som kreves for å flytte fabrikkdelen. Hjelper med å produsere en mer konsekvent avtrekk for forbedret nøyaktighet. Stoppeskruen kan justeres for overtrekk og fortrekk med pistolen fullt montert, slik at du får et avtrekk uten kryp. Ultramyk sko gir mer kontakt med avtrekkerfingeren. Tilgjengelig i svart anodisert aluminium eller polert rustfritt stål (SS). Inkluderer avtrekkerfjær og avtrekkerfjærstøtter.

899 NOK 5 kr 899,00 *

Leveringstid ca. 14-21 dager.
5 stk. på lageret i USA

Spesifikasjoner: Finish: Black Make: Ruger Modell: Mark I, Mark II Style: Adjustable, Drop-In, Curved

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Oppgrader avtrekket på din Ruger med Volquartsen's presisjonsmaskinerte måltrigger. 🌟 Justerbar, ultramyk og tilgjengelig i rustfritt stål!

Drop-In Trigger Job For .22 Pistols

SPECS: Aluminum, anodized, black, or stainless steel, natural silver finish. .354" (9mm) wide trigger shoe face. Fits Ruger Mark I, Mark II, Mark III, and 22/45 pistols.

Mer...

Drop-In Avtrekkerjobb for .22 Pistoler

SPECS: Aluminium, anodisert, svart, eller rustfritt stål, naturlig sølvfinish. .354" (9mm) bredt avtrekkerskoansikt. Passer til Ruger Mark I, Mark II, Mark III og 22/45 pistoler.

Mer...

Kundevurderinger for VOLQUARTSEN RUGER® TARGET TRIGGER, SS

Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,4

Far better than their aluminum trigger (25.02.2012)

Overall better fit and finish than the aluminum Volquartsen trigger. I highly recommend this over either the Ruger factory of Volquartsen aluminum trigger.

Nice touch for Mark III (08.03.2012)

The set screw on the back of the trigger is to short ,, needs to be about .070 longer. Other than that its really good . I would buy it again .

Money Well Spent!!! (08.05.2014)

VOLQUARTSEN MK322/45 Trigger (14.05.2014)

Better have extra set screws (15.09.2011)

Works like a dream (10.03.2012)

Trigger works great ,looks good. But the set screw on the stop ( the one right behind your trigger finger is to short needs to be .312 long 8-32 by .312 long )

Works very well. (02.05.2013)

Les 7 flere anmeldelser fra brownells.com