Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

BROWNELLS
RUGER® DOUBLE ACTION SCREWDRIVER SET

050806107250 080432001

Self-Storing, Carry Along For 'Smiths & Shooters

Heat-treated, ejector retainer bit with Magna-Tip handle helps remove the ejector retainer screw; a “must do” step for complete disassembly of Ruger® double action cylinders. Self-aligns perfectly over the center pin rod during removal.

SPECS: Ejector Bit – Steel, 1-15⁄16" (5cm) long. Magna-Tip handle - 8” (20.3cm) long x 1¼" (3.2cm) diameter, solid grip handle. Fits Redhawk, Super Redhawk, GP-100, and SP101 Cylinders.

Will NOT fit the Super Redhawk Alaskan

Mer...

Selvoppbevarende, Ta med for 'Smiths & Skyttere

Varmebehandlet, utkasterfeste-bit med Magna-Tip håndtak hjelper med å fjerne utkasterfesteskruen; et “må gjøre”-steg for fullstendig demontering av Ruger® dobbeltvirkende sylindere. Selvjusterer perfekt over senterstiften under fjerning.

SPECS: Utkasterbit – Stål, 1-15⁄16" (5cm) lang. Magna-Tip håndtak - 8” (20.3cm) langt x 1¼" (3.2cm) diameter, solidt grep. Passer til Redhawk, Super Redhawk, GP-100, og SP101 sylindere.

Passer IKKE til Super Redhawk Alaskan

Mer...

Kundevurderinger for BROWNELLS RUGER® D/A EJECTOR BIT, ONLY

Antall vurderinger: 5
Fra brownells.com: 5
Gjennomsnittsvurdering: 4,2

Must Have Ruger Tool. (30.09.2011)

This item is not like the low quality tools alot of stores sell. Just by gripping it you know it is not going to snap into and cut your hand or ruin your weapon. Very well crafted. Even comes with directions if you should need them.

Worthless! (19.09.2014)

I just purchased this product to remove the ejector from my Ruger Super Redhawk 44 Mag and it does not fit my weapon. The product brochure days it is for the SP 100 and SP 101 with no mention of the Rehawk, or Super Redhawk.

Rob Bargewell

works fine on new SP101 (12.11.2015)

Was leery of this because of the other review and because I could not see a hole for the center pin rod (it protrudes through and above the ejector retainer). Brownell's tech support answered by questions expeditiously. It does have a hole. You must guide the rod into this nut, gently. The retainer is left-handed thread, and fairly tight on my new SP101. By the bye, the SP101 has evolved in the past few years (mine has the screw-in firing pin bushing) but the schematic for mine is correct as to the cylinder assembly, not that it is too complicated. Now, if Brownell's would provide a snake-eyes nut to just fit the firing pin bushing (it is sort of #10, but the prong holes are round and small), life with the SP101 would be almost easy__especially if I ignore the trigger group.

An essential Ruger DA tool (24.03.2017)

Test fits great, well made, ready to use. The one tool you have to have to totally disassemble a SP101 or GP100. The Redhawk, I think (?) uses the same design. I can think of no way to substitute another tool. Necessary for accessing the ejector, ejector spring, and center pins.

Someone mentioned the firing pin plug needing something similar. A good set of spring clip pliers with long tips should do that fairly well.

If you shoot GP, get this (31.07.2018)

I had to clean some flashing off mine. Other than that it is right on the money good.

Les 5 flere anmeldelser fra brownells.com

349 649 2 NOK

Produktnr.: 080432001
BROWNELLS RUGER® D/A EJECTOR BIT, ONLY
Produsentnr.: EJECTORBIT 050806107250 Varmebehandlet, utkasterfeste-bit med Magna-Tip håndtak hjelper med å fjerne utkasterfesteskruen; et “må gjøre”-steg for fullstendig demontering av Ruger® dobbeltvirkende sylindere. Selvjusterer perfekt over senterstiften under fjerning.

349 NOK 56 kr 349,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Blade Diameter: .398 Blade Thickness: .025 Style: Ejector

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Attributes

Blade Diameter: .398 Blade tykkelse: .025 Style: Ejector Leveringsvekt: 0,02kg Frakthøyde: 10mm Fraktbredde: 78mm Fraktlengde: 144mm UPC : 050806107250

Elementdetaljer

Made in USA

Produktnr.: 080000362
BROWNELLS RUGER® DOUBLE ACTION EJECTOR DRIVER SET 050806005983 Varmebehandlet, utkasterfeste-bit med Magna-Tip håndtak hjelper med å fjerne utkasterfesteskruen; et “må gjøre”-steg for fullstendig demontering av Ruger® dobbeltvirkende sylindere. Selvjusterer perfekt over senterstiften under fjerning.

649 NOK 56 kr 649,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Make: Ruger Modell: Universal Handguns

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Få en effektiv demontering av Ruger® med vår Ejector bit 🔧. Perfekt for Redhawk, GP-100 og SP101. Kvalitet fra BROWNELLS.

Self-Storing, Carry Along For 'Smiths & Shooters

SPECS: Ejector Bit – Steel, 1-15⁄16" (5cm) long. Magna-Tip handle - 8” (20.3cm) long x 1¼" (3.2cm) diameter, solid grip handle. Fits Redhawk, Super Redhawk, GP-100, and SP101 Cylinders.

Will NOT fit the Super Redhawk Alaskan

Mer...

Selvoppbevarende, Ta med for 'Smiths & Skyttere

SPECS: Utkasterbit – Stål, 1-15⁄16" (5cm) lang. Magna-Tip håndtak - 8” (20.3cm) langt x 1¼" (3.2cm) diameter, solidt grep. Passer til Redhawk, Super Redhawk, GP-100, og SP101 sylindere.

Passer IKKE til Super Redhawk Alaskan

Mer...