Do It Yourself Trigger Upgrades For Ruger~ Bolt Guns
Easy-to-install, triggers are investment cast from A-2 tool steel, then heat-treated and drawn to Rc 50-55 for long-lasting reliability. Radius ground sear surfaces help eliminate creep and enhance overall smoothness. Adjusts for weight of pull and uses the factory safety with no alterations. RU-MK II™ fits all Ruger M77® MKII™ rifles with 3-position safety. RU-R replaces the non-adjustable trigger in 77/22® and 77/17® rimfire rifles. Will not fit V/T Models with 2 stage trigger.
SPECS: A-2 tool steel, matte blue finish. Rc 50-55. Fits right- or left-hand rifles. RU-MK II - 14 oz. (397g) - 2½ lb. (1.1kg). RU-R - 1½ - 3 lb (.7-1.4kg).
Mer...
Gjør-det-selv avtrekksoppgraderinger for Ruger~ boltrifler
Lett å installere, avtrekkere er støpt i investeringskvalitet fra A-2 verktøystål, deretter varmebehandlet og trukket til Rc 50-55 for langvarig pålitelighet. Radius slipte sear-overflater bidrar til å eliminere kryping og forbedre den generelle jevnheten. Justerbar for avtrekksvekt og bruker fabrikkens sikkerhet uten endringer. RU-MK II™ passer alle Ruger M77® MKII™ rifler med 3-posisjons sikkerhet. RU-R erstatter det ikke-justerbare avtrekket i 77/22® og 77/17® salongrifler. Passer ikke V/T-modeller med 2-trinns avtrekk.
SPECS: A-2 verktøystål, matt blå finish. Rc 50-55. Passer høyre- eller venstrehånds rifler. RU-MK II - 14 oz. (397g) - 2½ lb. (1.1kg). RU-R - 1½ - 3 lb (.7-1.4kg).
Mer...
Kundevurderinger for RIFLE BASIX RU-R TRIGGER
Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 4,7
Simply the Best(11.04.2011)
Excellent trigger. Use it on the range (@ 14oz.) and for hunting (1.5lbs). Fully repeatable settings, one complete turn and weights are dead-on. Simple to install, easy to follow instructions. Very good buy, completely satisfied. One point to consider: you might want to put a drop of blue thread locker on the adjustment screw.
Good design(04.06.2011)
I tried the Timney sear in a M77/17, but it had too much creep. I then bought the Rifle Basix trigger and it was very easy to install and set for the factory safety. I like the fact that there are no modifications to any factory parts; you could return the gun to factory specs if you chose to. I would buy this again.
ru-r for ruger 77/357(12.01.2012)
this is an excellent product and easy for the home gunsmith to install. my ruger 77/357 now has a vastly improved trigger. the "rifle basix" customer service is excellent.
Exellent triger for the money(11.03.2012)
Lots of adjustment and very little if any creep. I did have to do some stock inletting to clear the safety adjustment screw but it was minor. I plan to order another for my 77/22. This one was for my 77/17.
No gunsmith needed(03.06.2012)
This trigger upgrade was so easy to install. The instructions were very clear with photos to prevent confusion. There is no creep and pull is adjustible in the field with out removing the action. I have my trigger set at the lightest setting ( a little over 1 lb ) and it is so nice. Be sure to test the safety and adjust before reassembling the rifle.
Great(01.04.2015)
Installed in my 77/44 and first trigger did not function properly, called âBrownellsâ and said would replace. Then phoned factory, they were more than Helpful, put replacement in Airmail that day and sent returne postage for defective one. New one works as described Thanks To All!
77/22 (31.05.2015)
Big improvement over stock 77/22 trigger but still small amount of creep and for the money should have come with replacement sear. Threads on safety engagement screw were damaged so I guess I will contact Brownells or Rifle Basix for replacement.
excellent for $$(13.03.2016)
Studied the reviews of this and others, picked this trigger. It was the right choice! Not a gunsmith, but tinker. No filing, no inletting, no messing up my gun. I installed this on my 77/17 in 20 minutes without a hitch. Was easy to adjust, no noticeable creep, VERY light and crisp. Compares close to the factory set trigger on my CZ 527/ .204. Very happy so far! Now to go pop some dogs!
Nice, very nice(13.05.2017)
Installed in a 77/22 ("all weather"). Needed minor wood removal inside stock due to the new safety set screw scraping. No big deal. The trigger pull went from awful to sweet. KInda hard to put into words. It's so good, Brownells' rating censors probably would not would allow me to fully describe it.- it's really that good!
Produktnr.: 758000010 RIFLE BASIX RU-R TRIGGER Produsentnr.: RU-R BLACK891678000481 Lett å installere, avtrekkere er støpt i investeringskvalitet fra A-2 verktøystål, deretter varmebehandlet og trukket til Rc 50-55 for langvarig pålitelighet. Radius slipte sear-overflater bidrar til å eliminere kryping og forbedre den generelle jevnheten. Justerbar for avtrekksvekt og bruker fabrikkens sikkerhet uten endringer. RU-MK II™ passer alle Ruger M77® MKII™ rifler med 3-posisjons sikkerhet. RU-R erstatter det ikke-justerbare avtrekket i 77/22® og 77/17® salongrifler. Passer ikke V/T-modeller med 2-trinns avtrekk.
2149NOK2kr 2 149,00
*
Leveringstid ca. 14-21 dager. 2 stk. på lageret i USA
Made in USA
US eksport klassifisering: 0A501.c
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr.: 758000008 RIFLE BASIX RU-MK II TRIGGER Produsentnr.: RU-MK II BLACK891678000474 Lett å installere, avtrekkere er støpt i investeringskvalitet fra A-2 verktøystål, deretter varmebehandlet og trukket til Rc 50-55 for langvarig pålitelighet. Radius slipte sear-overflater bidrar til å eliminere kryping og forbedre den generelle jevnheten. Justerbar for avtrekksvekt og bruker fabrikkens sikkerhet uten endringer. RU-MK II™ passer alle Ruger M77® MKII™ rifler med 3-posisjons sikkerhet. RU-R erstatter det ikke-justerbare avtrekket i 77/22® og 77/17® salongrifler. Passer ikke V/T-modeller med 2-trinns avtrekk.
2149NOK5kr 2 149,00
*
Leveringstid ca. 14-21 dager. 5 stk. på lageret i USA
Spesifikasjoner:Make: RugerModell: M77 Mark IIStyle: Adjustable
Do It Yourself Trigger Upgrades For Ruger~ Bolt Guns
Easy-to-install, triggers are investment cast from A-2 tool steel, then heat-treated and drawn to Rc 50-55 for long-lasting reliability. Radius ground sear surfaces help eliminate creep and enhance overall smoothness. Adjusts for weight of pull and uses the factory safety with no alterations. RU-MK II™ fits all Ruger M77® MKII™ rifles with 3-position safety. RU-R replaces the non-adjustable trigger in 77/22® and 77/17® rimfire rifles. Will not fit V/T Models with 2 stage trigger.
SPECS: A-2 tool steel, matte blue finish. Rc 50-55. Fits right- or left-hand rifles. RU-MK II - 14 oz. (397g) - 2½ lb. (1.1kg). RU-R - 1½ - 3 lb (.7-1.4kg).
Mer...
Gjør-det-selv avtrekksoppgraderinger for Ruger~ boltrifler
Lett å installere, avtrekkere er støpt i investeringskvalitet fra A-2 verktøystål, deretter varmebehandlet og trukket til Rc 50-55 for langvarig pålitelighet. Radius slipte sear-overflater bidrar til å eliminere kryping og forbedre den generelle jevnheten. Justerbar for avtrekksvekt og bruker fabrikkens sikkerhet uten endringer. RU-MK II™ passer alle Ruger M77® MKII™ rifler med 3-posisjons sikkerhet. RU-R erstatter det ikke-justerbare avtrekket i 77/22® og 77/17® salongrifler. Passer ikke V/T-modeller med 2-trinns avtrekk.
SPECS: A-2 verktøystål, matt blå finish. Rc 50-55. Passer høyre- eller venstrehånds rifler. RU-MK II - 14 oz. (397g) - 2½ lb. (1.1kg). RU-R - 1½ - 3 lb (.7-1.4kg).
Mer...
Kundevurderinger for RIFLE BASIX RU-R TRIGGER
Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 4,7
Simply the Best(11.04.2011)
Excellent trigger. Use it on the range (@ 14oz.) and for hunting (1.5lbs). Fully repeatable settings, one complete turn and weights are dead-on. Simple to install, easy to follow instructions. Very good buy, completely satisfied. One point to consider: you might want to put a drop of blue thread locker on the adjustment screw.
Good design(04.06.2011)
I tried the Timney sear in a M77/17, but it had too much creep. I then bought the Rifle Basix trigger and it was very easy to install and set for the factory safety. I like the fact that there are no modifications to any factory parts; you could return the gun to factory specs if you chose to. I would buy this again.
ru-r for ruger 77/357(12.01.2012)
this is an excellent product and easy for the home gunsmith to install. my ruger 77/357 now has a vastly improved trigger. the "rifle basix" customer service is excellent.
Exellent triger for the money(11.03.2012)
Lots of adjustment and very little if any creep. I did have to do some stock inletting to clear the safety adjustment screw but it was minor. I plan to order another for my 77/22. This one was for my 77/17.
No gunsmith needed(03.06.2012)
This trigger upgrade was so easy to install. The instructions were very clear with photos to prevent confusion. There is no creep and pull is adjustible in the field with out removing the action. I have my trigger set at the lightest setting ( a little over 1 lb ) and it is so nice. Be sure to test the safety and adjust before reassembling the rifle.
Great(01.04.2015)
Installed in my 77/44 and first trigger did not function properly, called âBrownellsâ and said would replace. Then phoned factory, they were more than Helpful, put replacement in Airmail that day and sent returne postage for defective one. New one works as described Thanks To All!
77/22 (31.05.2015)
Big improvement over stock 77/22 trigger but still small amount of creep and for the money should have come with replacement sear. Threads on safety engagement screw were damaged so I guess I will contact Brownells or Rifle Basix for replacement.
excellent for $$(13.03.2016)
Studied the reviews of this and others, picked this trigger. It was the right choice! Not a gunsmith, but tinker. No filing, no inletting, no messing up my gun. I installed this on my 77/17 in 20 minutes without a hitch. Was easy to adjust, no noticeable creep, VERY light and crisp. Compares close to the factory set trigger on my CZ 527/ .204. Very happy so far! Now to go pop some dogs!
Nice, very nice(13.05.2017)
Installed in a 77/22 ("all weather"). Needed minor wood removal inside stock due to the new safety set screw scraping. No big deal. The trigger pull went from awful to sweet. KInda hard to put into words. It's so good, Brownells' rating censors probably would not would allow me to fully describe it.- it's really that good!