Heavy contour, premium-grade “Bentz” chambered .22 LR barrel provides an immediate improvement in accuracy over your original factory barrel. Close-tolerance Bentz chamber combines the accuracy of a match grade chamber with the reliable cycling of a standard factory chamber. Extra-heavy, untapered .920" O.D. provides maximum stability for greater shot-to-shot consistency. Use with standard or match grade ammunition; not for use with CCI Stinger ammunition. Minor fitting to stock may be required. Chrome-moly models have polished blue finish and are available in an 18" length with dished crown or a 16 ½" length with ½"-28 tpi threaded muzzle for adding a compensator. Stainless model available in smooth 18" long barrel or patented helical fluting for greater heat dissipation, less weight, and improved barrel harmonics. Both have dished crown.
Tung kontur, premium-grade “Bentz” kamret .22 LR løp gir umiddelbar forbedring i nøyaktighet over ditt originale fabrikkløp. Close-tolerance Bentz kammer kombinerer nøyaktigheten til et match grade kammer med pålitelig sykling av et standard fabrikkammer. Ekstra-tung, utapered .920" O.D. gir maksimal stabilitet for større konsistens skudd-til-skudd. Brukes med standard eller match grade ammunisjon; skal ikke brukes med CCI Stinger ammunisjon. Mindre tilpasning til kolben kan være nødvendig. Krom-moly modellene har polert blå finish og er tilgjengelige i en 18" lengde med senket krone eller en 16 ½" lengde med ½"-28 tpi gjengede munning for å legge til en kompensator. Rustfritt modell tilgjengelig i glatt 18" langt løp eller patentert helisk fluting for større varmeavledning, mindre vekt og forbedret løpsharmonikk. Begge har senket krone.
SPECS: 4140 krom-molybden stål, blånet, polert finish, eller 416 rustfritt stål (SS), naturlig matt finish. .920" (2.34cm) O.D. 18" lang (45.7cm). Blånet løp med gjengede munning – 16½" (42cm) lang. ½"-28 tpi gjenge.
Mer...
Kundevurderinger for E.R. SHAW 10/22® THREADED TARGET BARREL, BLUED
Antall vurderinger: 23
Fra brownells.com: 23
Gjennomsnittsvurdering: 5
Great barrel for the price.(22.12.2010)
Great handling with this shorter version. Fit and finish was perfect. Very accurate 25 rounds inside a Quarter at 50 yards as fast as you can get on target likes remington golden bullets best.
Couldn't be happier!(23.05.2011)
This barrel is great. A vast improvement over Ruger stock barrel and yet not at all ammo picky. In fact I was getting better 100 yard groups with Winchester Bulk 333 and Federal Bulk 525 packs than from my CCI Mini-Mag's, Aguila Match and Fiocchi Match Training. RWS Match, Fiocchi Exact Super Match and Eley Match were the tightest groups all sub MOA @ 100 but other than occasional flyer so where the bulk packs. Over 1500 rounds were put through this barrel in its first day out and I had one failure to feed, (Which was more likely the mags. fault) and two failures to fire (Both happened at the end of the day and during a rapid firing of 25 rd. mags. with bulk pack ammo). My friend has a much more expensive, longer and ammo picky barrel and when he shot 5-5 round groups at 50 and 5-5round groups at 100 with both guns using same ammo for each he had nearly identical groupings⦠all in all you can hit an acorn in an oak tree at 50 yards. I couldn't be happier
This is a heavy barrel. That said, I would not put this on a tactical or run and gun .22 or a pack gun. With my Tactical Solutions muzzle brake it added nearly 3.5 lbs over the stock barrel weight.
Nice for the price(18.05.2012)
I got this for a budget build 10/22 target/tactical for the wife. This barrel is 16 ½" long and very nice for a working man's price. I wish I bought 2 of them.
Great upgrade for my old 10/22(22.11.2013)
This barrel was v. easy to install, and has put new life into my trusty old Ruger. I use CCI 22LR subsonic ammo, suppressor, Nikon Prostaff 22 rimfire BDC 150 scope, and Game Reaper mount. It's a little heaver when walking around, but I'm confident to hit anything out to 120 meters with subs.
Workhorse(05.05.2015)
I took this barrel for its first real outing on a trip to shoot sage rats in southern Oregon. The barrel was incredibly accurate, and I had no problem all day shooting out to 150 yards. I even took a few out at 250 yard, once I managed to compensate for the drop, however windage was right on, and I got very consistent results when adjusting for elevation so I am going to say that this barrel is better than the shooter. And for the price, it would be just about impossible to beat!
Wow(18.06.2015)
It was pretty easy to install, took 15 minutes.
Took it to the range and zeroed it at 25 yards, here are the results:
- Key holed each time.
- Barrel fires at sub-MOA between 25-100 yards consistently.
I used Agurie .22 ammo, nothing special.
Fits great with the Hogue over molded stock.
Worth every penny, wish I would have swapped barrels 20 years ago.
BROWNELLS / HAWAII(30.11.2015)
This is the Best Company to purchase from....!
Excellent service, very respectful, great product knowledge,
ACTULEY care about there customers and there Shipping to Hawaii Excellent !
The Amazon of Firearm's Parts & Service!!!
Mahalo,
Nice barrel(08.11.2016)
Bought this to breathe new life into an old 10/22. Added this barrel, a Hogue stock, Hornet Custom trigger and an optic. The gun can how host my TacSol Axiom and shoots like a dream. The barrel is flawless in terms of machining and installed in about 10 minutes. I considered the TaxSol X-Ring but at twice the $ I couldn't justify it.
My only complaint: It's heavy. At 2.8# this doesn't make for a light little .22 that you'd be happy toting around all day. If that's your goal then for sure spring for the 16oz TacSol barrel. But if you are target shooting or doing some stationary hunting this barrel should serve you well, and for the price it's an excellent value. Sell your old barrel and stock on fleabay and you'll almost have the cost of this barrel back in your pocket.
Great value!!(30.11.2016)
Great looking barrel. Fit perfectly with Magpul X-22 stock. The barrel is .920 and the muzzle break I used that matched was Tactical Solutions 1022 CMP-02.
Heated up the reciever with a hair dryer and installation was a breeze.
What's Great: Value and Quality. I was unable to find a threaded barrel at a price to match this one. The Benz Chamber is great for accuracy improvements, Machine work and overall finish look great.
Not So Great: With my rifle it does have issues feeding (3 of 50) the Flat Nose (Hollow Point) Ammo however it was purchased to shoot paper in my case so this is not an issue. I have not attempted different mags so this could also be an issue of the specific mag I have been using.
Fit was great and required no additional work other than bolting in the retaining block and placing back into the stock. It actually may have seemed a little looser than I would have liked but has not seemed to effect barrel droop or accuracy. I bed the action and first 1.5 inch of the barrel.
I am still working on accuracy (which ammo it likes) appears to like 40gr round nose best, better than 0.75 MOA at 50 Yards and some groups at 0.38 after only 100 rounds so not close to being broken in.
Wonderfully Accurate(27.07.2013)
Built a 10/22 using:
Timney 10/22 Drop-In Trigger Assembly 883-000-038WB -- great trigger, drop in with no fitting required. The lever magazine release is a great addition, helping with making the rifle a little more ambidextrous. The spring loaded bolt release works as we are accustomed to unlike the factory release. The trigger pull is crisp and clean reminiscent of the Jewel triggers on my 700. The trigger is a vast improvement over factory. 4 stars as the pull measured 3lbs on my Lyman gauge, preferred for hunting but as it is not adjustable I don't consider this a bench rest trigger.
ER Shaw Fluted 10/22 .920 Target Barrel, SS 100-004-747WB -- everything I was looking for. Looks great and shoots great. 1/2" groups at 75 yards on a 100 degree, 10 - 15 mph gusty day with 20 year old Remington Golden Bullet HP, very satisfying. The barrel dropped right into the action and was installed using the factory V-block without barrel droop. V-block barrel retaining screws were just snugged. Checked with a set of headspace gauges and everything was fine and good to go. A 5 star barrel for sure.
Hogue 10/22 Overmolded Rifle Stock B/B Rubber Covering 408-220-100WB -- The stock I wanted was out of stock so I got this one to do the build. I am liking it. Feels good in hand and on the shoulder. Ambidextrous! Bedding was accurate and felt solid. With the action screw torqued to 18 in-lbs the Shaw barrel was dollar bill free floated from 1" behind the flutes to the muzzle. The semi-varmint fore end is a joy in hand or on a bag. 4 Stars as the fore end will flex enough to touch the barrel with moderate straight line side hand pressure, a hasty sling or tight sling. Still I may well forget about the stock I wanted that cost 2-1/2 times as much, this one shoots and feels so good.
Volquartsen 10/22 Socket Head Takedown Screw 930-000-O26WB -- Comparing this screw to my factory screw it is about 2-1/2 threads shorter. However it fit this build just fine, earning it 5 Stars. It and the receiver handled 18 in-lbs of torque without problem.
Outstanding Barrel(25.04.2015)
I put this barrel in a brand new receiver with the BX-25 Ruger trigger. I also used a Boyd's rimfire thumb-hole stock. It is an incredibly accurate barrel/stock/trigger combination. Dime sized groups at 100 yards (10+ rounds). Everything I wanted and could not be happier. Every one that sees the spiral fluted barrel loves it. Good barrel, good price, excellent accuracy.
A friend took one look and wants me to build him one with the same barrel.
Looks great(06.02.2012)
I bought this barrel as a upgrade it installed easy, looks great and shoots even better
good barrel(12.09.2013)
fantastic barrel. noticed a difference the first time I shot with it. best value for a great product if you want to trick out your gun.
Installation was surprisingly easy.(20.03.2016)
I purchased the ER Shaw stainless barrel and installed it on a 10/22 that I've owned for about 5 years. I was very concerned that removing and installing the barrels would be really difficult. I put the new barrel in the freezer for a week and let it contract as much as possible.
Removing the old barrel was surprisingly easy. I had to tap on the receiver with a rubber mallet but it slowly separated. It took me about 5 minutes to get it off.
Installing the frozen barrel was even easier as it just slipped right in. I was worried that it would be hard to align the slot on the barrel but the way the system works that is not really an issue as the clamps will make sure it is in the right spot. Just tighten the clamp slowly and readjust to align every so often.
I also replaced the original stock with a Hogue rubber stock for a bull barrel and it worked great too.
I did a few test shots and everything worked great, all shells ejected nicely
One last thing, you don't need the barrel band on from the original stock - so don't worry about that.
I am always nervous about buying things on the internet because I can't touch and feel them, but this time it worked great. The gun looks great and is shooting great. My first three test shots a 20 yards were in a circle the size of a quarter and I had not sighted the gun in yet.
Drop-in fit on my current generation receiver, top-notch finish, completely reliable with match ammo, and very accurate--one hole groups at 50 yards.
Great Barrel So Far!(11.01.2013)
Using this barrel for a 10/22 Carbine to Target rifle upgrade. Took a bit to get here but came in an awesome thick-walled cardboard tube. (I tried to order the same barrel from another vendor and had an empty, broken, thinwalled cardboard tube delivered to the house. Not good.) Bore looks perfect. Crown and breech look great too. Perfect blue-job. Can't wait to get this installed and send some down-range. Great job E R Shaw and Brownells!
Surprising Accuracy for the price(01.08.2014)
I replaced a factory target barrel that was sensative to ammo changes. (Cheap ammo just did not shoot well through the Ruger barrel). I put this barrel on and I am now getting 2 inch groups at 100 yards. I use the gun to target shoot as well as get rid of pest animals. In short, the barrel more that meets expectations for the price.
Outstanding Value(22.09.2015)
This is my second ER Shaw 10/22 barrel and have not been disappointed . Quality is excellent , accuracy is very good not as good as my KIDD barrels but close for less than half there cost . I used this one to replace my 77/22 factory barrel.
Set the shoulder back, added another extractor slot and recut clamping dovetail and you have a VERY accurate 77/22. For 30% of what some manufactures want for there products.
2 shots down(13.10.2015)
Shipped exactly like they stated and was here in 5 days. I already had the receiver stripped , took 5 minutes to install. Threw a scope on it shot a two shot penny sized group at 20 yards. Topped of with a compensator, made it look awesome and fit totally flush on this barrel. So far so good, can't wait to shoot it at 100 yards and see what happens.
Great barrels (20.10.2015)
10 rounds cci standard ammo through the same hole , about .5 inches at 50 yards .... all day long with this barrel . all day !
I live close to the factory and went to talk the guys down there , great guys , eager to help . AMERICAN MADE by AMERICANS !!
Very good barrel(15.11.2016)
I think that I've shot this barrel enough to give a good review on it. This barrel was bought for my 10/22 build. The barrel was easy to install into the reciver, right after I got it installed I took it to the range. The first few shots at 15 yards were one ragged hole. Then I moved out to 50 yards to see what it could do. So far CCI AR tactical 40gr has given me the best groups, along with eley target ammo (they shoot about 1/2 to 3/8 of an inch) moving out to 100 yards with the CCI AR tactical it gave me the best group of 3/4 of an inch. The eley target gave me a group of about 7/8 inch groups. This is with a stock trigger and free floated barrel. In short this barrel is awesome, you can use it for competitions and varmiting alike.
Excellent value!!(05.04.2018)
Bought this barrel to replace the factory taper barrel. Installed in a couple minutes. Added a Hogue overmolded stock and you have a beautiful rifle....with a suppressor.
Produktnr.: 100004748 E.R. SHAW 10/22® THREADED TARGET BARREL, BLUED Produsentnr.: NONE Tung kontur, premium-grade “Bentz” kamret .22 LR løp gir umiddelbar forbedring i nøyaktighet over ditt originale fabrikkløp. Close-tolerance Bentz kammer kombinerer nøyaktigheten til et match grade kammer med pålitelig sykling av et standard fabrikkammer. Ekstra-tung, utapered .920" O.D. gir maksimal stabilitet for større konsistens skudd-til-skudd. Brukes med standard eller match grade ammunisjon; skal ikke brukes med CCI Stinger ammunisjon. Mindre tilpasning til kolben kan være nødvendig. Krom-moly modellene har polert blå finish og er tilgjengelige i en 18" lengde med senket krone eller en 16 ½" lengde med ½"-28 tpi gjengede munning for å legge til en kompensator. Rustfritt modell tilgjengelig i glatt 18" langt løp eller patentert helisk fluting for større varmeavledning, mindre vekt og forbedret løpsharmonikk. Begge har senket krone.
2599NOK53kr 2 599,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Krav til kjøpetillatelse eller våpenkort og legitimasjon dersom kjøper har våpen i samme kaliber.(Original kjøpetillatelse må sendes pr post. Ordre blir ikke effektuert før kjøpetillatelse eller annen dokumentasjon foreligger))
Top takeaways
Tung kontur og premium-grade “Bentz” kammer gir forbedret nøyaktighet og pålitelig sykling.
Tilgjengelig i både blånet krom-molybden stål og rustfritt stål med ulike lengder og finish.
Ekstra-tung, utapered .920" O.D. gir maksimal stabilitet og konsistens skudd-til-skudd.
Made in USA
US eksport klassifisering: 0A501.c
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr.: 100004745 E.R. SHAW 10/22® TARGET BARREL, BLUED Produsentnr.: NONE Tung kontur, premium-grade “Bentz” kamret .22 LR løp gir umiddelbar forbedring i nøyaktighet over ditt originale fabrikkløp. Close-tolerance Bentz kammer kombinerer nøyaktigheten til et match grade kammer med pålitelig sykling av et standard fabrikkammer. Ekstra-tung, utapered .920" O.D. gir maksimal stabilitet for større konsistens skudd-til-skudd. Brukes med standard eller match grade ammunisjon; skal ikke brukes med CCI Stinger ammunisjon. Mindre tilpasning til kolben kan være nødvendig. Krom-moly modellene har polert blå finish og er tilgjengelige i en 18" lengde med senket krone eller en 16 ½" lengde med ½"-28 tpi gjengede munning for å legge til en kompensator. Rustfritt modell tilgjengelig i glatt 18" langt løp eller patentert helisk fluting for større varmeavledning, mindre vekt og forbedret løpsharmonikk. Begge har senket krone.
2599NOK60kr 2 599,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Produktnr.: 100004746 E.R. SHAW 10/22® TARGET BARREL, SS Produsentnr.: NONE Tung kontur, premium-grade “Bentz” kamret .22 LR løp gir umiddelbar forbedring i nøyaktighet over ditt originale fabrikkløp. Close-tolerance Bentz kammer kombinerer nøyaktigheten til et match grade kammer med pålitelig sykling av et standard fabrikkammer. Ekstra-tung, utapered .920" O.D. gir maksimal stabilitet for større konsistens skudd-til-skudd. Brukes med standard eller match grade ammunisjon; skal ikke brukes med CCI Stinger ammunisjon. Mindre tilpasning til kolben kan være nødvendig. Krom-moly modellene har polert blå finish og er tilgjengelige i en 18" lengde med senket krone eller en 16 ½" lengde med ½"-28 tpi gjengede munning for å legge til en kompensator. Rustfritt modell tilgjengelig i glatt 18" langt løp eller patentert helisk fluting for større varmeavledning, mindre vekt og forbedret løpsharmonikk. Begge har senket krone.
2699NOK23kr 2 699,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Produktnr.: 100004747 E.R. SHAW 10/22® FLUTED TARGET BARREL, SS Produsentnr.: NONE Tung kontur, premium-grade “Bentz” kamret .22 LR løp gir umiddelbar forbedring i nøyaktighet over ditt originale fabrikkløp. Close-tolerance Bentz kammer kombinerer nøyaktigheten til et match grade kammer med pålitelig sykling av et standard fabrikkammer. Ekstra-tung, utapered .920" O.D. gir maksimal stabilitet for større konsistens skudd-til-skudd. Brukes med standard eller match grade ammunisjon; skal ikke brukes med CCI Stinger ammunisjon. Mindre tilpasning til kolben kan være nødvendig. Krom-moly modellene har polert blå finish og er tilgjengelige i en 18" lengde med senket krone eller en 16 ½" lengde med ½"-28 tpi gjengede munning for å legge til en kompensator. Rustfritt modell tilgjengelig i glatt 18" langt løp eller patentert helisk fluting for større varmeavledning, mindre vekt og forbedret løpsharmonikk. Begge har senket krone.
5099NOK16kr 5 099,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Heavy contour, premium-grade “Bentz” chambered .22 LR barrel provides an immediate improvement in accuracy over your original factory barrel. Close-tolerance Bentz chamber combines the accuracy of a match grade chamber with the reliable cycling of a standard factory chamber. Extra-heavy, untapered .920" O.D. provides maximum stability for greater shot-to-shot consistency. Use with standard or match grade ammunition; not for use with CCI Stinger ammunition. Minor fitting to stock may be required. Chrome-moly models have polished blue finish and are available in an 18" length with dished crown or a 16 ½" length with ½"-28 tpi threaded muzzle for adding a compensator. Stainless model available in smooth 18" long barrel or patented helical fluting for greater heat dissipation, less weight, and improved barrel harmonics. Both have dished crown.
Tung kontur, premium-grade “Bentz” kamret .22 LR løp gir umiddelbar forbedring i nøyaktighet over ditt originale fabrikkløp. Close-tolerance Bentz kammer kombinerer nøyaktigheten til et match grade kammer med pålitelig sykling av et standard fabrikkammer. Ekstra-tung, utapered .920" O.D. gir maksimal stabilitet for større konsistens skudd-til-skudd. Brukes med standard eller match grade ammunisjon; skal ikke brukes med CCI Stinger ammunisjon. Mindre tilpasning til kolben kan være nødvendig. Krom-moly modellene har polert blå finish og er tilgjengelige i en 18" lengde med senket krone eller en 16 ½" lengde med ½"-28 tpi gjengede munning for å legge til en kompensator. Rustfritt modell tilgjengelig i glatt 18" langt løp eller patentert helisk fluting for større varmeavledning, mindre vekt og forbedret løpsharmonikk. Begge har senket krone.
SPECS: 4140 krom-molybden stål, blånet, polert finish, eller 416 rustfritt stål (SS), naturlig matt finish. .920" (2.34cm) O.D. 18" lang (45.7cm). Blånet løp med gjengede munning – 16½" (42cm) lang. ½"-28 tpi gjenge.
Mer...
Kundevurderinger for E.R. SHAW 10/22® THREADED TARGET BARREL, BLUED
Antall vurderinger: 23
Fra brownells.com: 23
Gjennomsnittsvurdering: 5
Great barrel for the price.(22.12.2010)
Great handling with this shorter version. Fit and finish was perfect. Very accurate 25 rounds inside a Quarter at 50 yards as fast as you can get on target likes remington golden bullets best.
Couldn't be happier!(23.05.2011)
This barrel is great. A vast improvement over Ruger stock barrel and yet not at all ammo picky. In fact I was getting better 100 yard groups with Winchester Bulk 333 and Federal Bulk 525 packs than from my CCI Mini-Mag's, Aguila Match and Fiocchi Match Training. RWS Match, Fiocchi Exact Super Match and Eley Match were the tightest groups all sub MOA @ 100 but other than occasional flyer so where the bulk packs. Over 1500 rounds were put through this barrel in its first day out and I had one failure to feed, (Which was more likely the mags. fault) and two failures to fire (Both happened at the end of the day and during a rapid firing of 25 rd. mags. with bulk pack ammo). My friend has a much more expensive, longer and ammo picky barrel and when he shot 5-5 round groups at 50 and 5-5round groups at 100 with both guns using same ammo for each he had nearly identical groupings⦠all in all you can hit an acorn in an oak tree at 50 yards. I couldn't be happier
This is a heavy barrel. That said, I would not put this on a tactical or run and gun .22 or a pack gun. With my Tactical Solutions muzzle brake it added nearly 3.5 lbs over the stock barrel weight.
Nice for the price(18.05.2012)
I got this for a budget build 10/22 target/tactical for the wife. This barrel is 16 ½" long and very nice for a working man's price. I wish I bought 2 of them.
Great upgrade for my old 10/22(22.11.2013)
This barrel was v. easy to install, and has put new life into my trusty old Ruger. I use CCI 22LR subsonic ammo, suppressor, Nikon Prostaff 22 rimfire BDC 150 scope, and Game Reaper mount. It's a little heaver when walking around, but I'm confident to hit anything out to 120 meters with subs.
Workhorse(05.05.2015)
I took this barrel for its first real outing on a trip to shoot sage rats in southern Oregon. The barrel was incredibly accurate, and I had no problem all day shooting out to 150 yards. I even took a few out at 250 yard, once I managed to compensate for the drop, however windage was right on, and I got very consistent results when adjusting for elevation so I am going to say that this barrel is better than the shooter. And for the price, it would be just about impossible to beat!
Wow(18.06.2015)
It was pretty easy to install, took 15 minutes.
Took it to the range and zeroed it at 25 yards, here are the results:
- Key holed each time.
- Barrel fires at sub-MOA between 25-100 yards consistently.
I used Agurie .22 ammo, nothing special.
Fits great with the Hogue over molded stock.
Worth every penny, wish I would have swapped barrels 20 years ago.
BROWNELLS / HAWAII(30.11.2015)
This is the Best Company to purchase from....!
Excellent service, very respectful, great product knowledge,
ACTULEY care about there customers and there Shipping to Hawaii Excellent !
The Amazon of Firearm's Parts & Service!!!
Mahalo,
Nice barrel(08.11.2016)
Bought this to breathe new life into an old 10/22. Added this barrel, a Hogue stock, Hornet Custom trigger and an optic. The gun can how host my TacSol Axiom and shoots like a dream. The barrel is flawless in terms of machining and installed in about 10 minutes. I considered the TaxSol X-Ring but at twice the $ I couldn't justify it.
My only complaint: It's heavy. At 2.8# this doesn't make for a light little .22 that you'd be happy toting around all day. If that's your goal then for sure spring for the 16oz TacSol barrel. But if you are target shooting or doing some stationary hunting this barrel should serve you well, and for the price it's an excellent value. Sell your old barrel and stock on fleabay and you'll almost have the cost of this barrel back in your pocket.
Great value!!(30.11.2016)
Great looking barrel. Fit perfectly with Magpul X-22 stock. The barrel is .920 and the muzzle break I used that matched was Tactical Solutions 1022 CMP-02.
Heated up the reciever with a hair dryer and installation was a breeze.
What's Great: Value and Quality. I was unable to find a threaded barrel at a price to match this one. The Benz Chamber is great for accuracy improvements, Machine work and overall finish look great.
Not So Great: With my rifle it does have issues feeding (3 of 50) the Flat Nose (Hollow Point) Ammo however it was purchased to shoot paper in my case so this is not an issue. I have not attempted different mags so this could also be an issue of the specific mag I have been using.
Fit was great and required no additional work other than bolting in the retaining block and placing back into the stock. It actually may have seemed a little looser than I would have liked but has not seemed to effect barrel droop or accuracy. I bed the action and first 1.5 inch of the barrel.
I am still working on accuracy (which ammo it likes) appears to like 40gr round nose best, better than 0.75 MOA at 50 Yards and some groups at 0.38 after only 100 rounds so not close to being broken in.
Wonderfully Accurate(27.07.2013)
Built a 10/22 using:
Timney 10/22 Drop-In Trigger Assembly 883-000-038WB -- great trigger, drop in with no fitting required. The lever magazine release is a great addition, helping with making the rifle a little more ambidextrous. The spring loaded bolt release works as we are accustomed to unlike the factory release. The trigger pull is crisp and clean reminiscent of the Jewel triggers on my 700. The trigger is a vast improvement over factory. 4 stars as the pull measured 3lbs on my Lyman gauge, preferred for hunting but as it is not adjustable I don't consider this a bench rest trigger.
ER Shaw Fluted 10/22 .920 Target Barrel, SS 100-004-747WB -- everything I was looking for. Looks great and shoots great. 1/2" groups at 75 yards on a 100 degree, 10 - 15 mph gusty day with 20 year old Remington Golden Bullet HP, very satisfying. The barrel dropped right into the action and was installed using the factory V-block without barrel droop. V-block barrel retaining screws were just snugged. Checked with a set of headspace gauges and everything was fine and good to go. A 5 star barrel for sure.
Hogue 10/22 Overmolded Rifle Stock B/B Rubber Covering 408-220-100WB -- The stock I wanted was out of stock so I got this one to do the build. I am liking it. Feels good in hand and on the shoulder. Ambidextrous! Bedding was accurate and felt solid. With the action screw torqued to 18 in-lbs the Shaw barrel was dollar bill free floated from 1" behind the flutes to the muzzle. The semi-varmint fore end is a joy in hand or on a bag. 4 Stars as the fore end will flex enough to touch the barrel with moderate straight line side hand pressure, a hasty sling or tight sling. Still I may well forget about the stock I wanted that cost 2-1/2 times as much, this one shoots and feels so good.
Volquartsen 10/22 Socket Head Takedown Screw 930-000-O26WB -- Comparing this screw to my factory screw it is about 2-1/2 threads shorter. However it fit this build just fine, earning it 5 Stars. It and the receiver handled 18 in-lbs of torque without problem.
Outstanding Barrel(25.04.2015)
I put this barrel in a brand new receiver with the BX-25 Ruger trigger. I also used a Boyd's rimfire thumb-hole stock. It is an incredibly accurate barrel/stock/trigger combination. Dime sized groups at 100 yards (10+ rounds). Everything I wanted and could not be happier. Every one that sees the spiral fluted barrel loves it. Good barrel, good price, excellent accuracy.
A friend took one look and wants me to build him one with the same barrel.
Looks great(06.02.2012)
I bought this barrel as a upgrade it installed easy, looks great and shoots even better
good barrel(12.09.2013)
fantastic barrel. noticed a difference the first time I shot with it. best value for a great product if you want to trick out your gun.
Installation was surprisingly easy.(20.03.2016)
I purchased the ER Shaw stainless barrel and installed it on a 10/22 that I've owned for about 5 years. I was very concerned that removing and installing the barrels would be really difficult. I put the new barrel in the freezer for a week and let it contract as much as possible.
Removing the old barrel was surprisingly easy. I had to tap on the receiver with a rubber mallet but it slowly separated. It took me about 5 minutes to get it off.
Installing the frozen barrel was even easier as it just slipped right in. I was worried that it would be hard to align the slot on the barrel but the way the system works that is not really an issue as the clamps will make sure it is in the right spot. Just tighten the clamp slowly and readjust to align every so often.
I also replaced the original stock with a Hogue rubber stock for a bull barrel and it worked great too.
I did a few test shots and everything worked great, all shells ejected nicely
One last thing, you don't need the barrel band on from the original stock - so don't worry about that.
I am always nervous about buying things on the internet because I can't touch and feel them, but this time it worked great. The gun looks great and is shooting great. My first three test shots a 20 yards were in a circle the size of a quarter and I had not sighted the gun in yet.
Drop-in fit on my current generation receiver, top-notch finish, completely reliable with match ammo, and very accurate--one hole groups at 50 yards.
Great Barrel So Far!(11.01.2013)
Using this barrel for a 10/22 Carbine to Target rifle upgrade. Took a bit to get here but came in an awesome thick-walled cardboard tube. (I tried to order the same barrel from another vendor and had an empty, broken, thinwalled cardboard tube delivered to the house. Not good.) Bore looks perfect. Crown and breech look great too. Perfect blue-job. Can't wait to get this installed and send some down-range. Great job E R Shaw and Brownells!
Surprising Accuracy for the price(01.08.2014)
I replaced a factory target barrel that was sensative to ammo changes. (Cheap ammo just did not shoot well through the Ruger barrel). I put this barrel on and I am now getting 2 inch groups at 100 yards. I use the gun to target shoot as well as get rid of pest animals. In short, the barrel more that meets expectations for the price.
Outstanding Value(22.09.2015)
This is my second ER Shaw 10/22 barrel and have not been disappointed . Quality is excellent , accuracy is very good not as good as my KIDD barrels but close for less than half there cost . I used this one to replace my 77/22 factory barrel.
Set the shoulder back, added another extractor slot and recut clamping dovetail and you have a VERY accurate 77/22. For 30% of what some manufactures want for there products.
2 shots down(13.10.2015)
Shipped exactly like they stated and was here in 5 days. I already had the receiver stripped , took 5 minutes to install. Threw a scope on it shot a two shot penny sized group at 20 yards. Topped of with a compensator, made it look awesome and fit totally flush on this barrel. So far so good, can't wait to shoot it at 100 yards and see what happens.
Great barrels (20.10.2015)
10 rounds cci standard ammo through the same hole , about .5 inches at 50 yards .... all day long with this barrel . all day !
I live close to the factory and went to talk the guys down there , great guys , eager to help . AMERICAN MADE by AMERICANS !!
Very good barrel(15.11.2016)
I think that I've shot this barrel enough to give a good review on it. This barrel was bought for my 10/22 build. The barrel was easy to install into the reciver, right after I got it installed I took it to the range. The first few shots at 15 yards were one ragged hole. Then I moved out to 50 yards to see what it could do. So far CCI AR tactical 40gr has given me the best groups, along with eley target ammo (they shoot about 1/2 to 3/8 of an inch) moving out to 100 yards with the CCI AR tactical it gave me the best group of 3/4 of an inch. The eley target gave me a group of about 7/8 inch groups. This is with a stock trigger and free floated barrel. In short this barrel is awesome, you can use it for competitions and varmiting alike.
Excellent value!!(05.04.2018)
Bought this barrel to replace the factory taper barrel. Installed in a couple minutes. Added a Hogue overmolded stock and you have a beautiful rifle....with a suppressor.
Hjelp og kontakt
(0) 
Nyhetsbrev
.jpg?sig=aa1cb95f8c4837c82ff061523477e88ec1967c0fcd86febfa7e53ea20210b18cc "E.R. SHAW"){kind=small}
Klassisk visning
Mobilvisning