Drop-in, .22 LR target barrel features a premium, button-rifled, chrome moly liner installed in a lightweight aluminum shell to achieve match grade accuracy and reduced weight. Deep, CNC machined flutes help keep barrel weight to 1 lb., plus increase rigidity and overall surface area for improved heat dissipation. Hardcoat anodized surface delivers added strength and abrasion resistance. Versatile, 1-16" twist rifling stabilizes a wide variety of hunting and match ammunition. Installation may require alteration to factory stock.
Mer...
Reduserer vekt uten å gå på akkord med nøyaktighet
Drop-in, .22 LR målløpsbarrel har en premium, knappe-riflet, krom moly-fôring installert i et lettvekts aluminiumsskall for å oppnå matchgradsnøyaktighet og redusert vekt. Dype, CNC-maskinerte fluter bidrar til å holde løpsvekten nede på 1 lb., i tillegg til å øke stivheten og den totale overflatearealet for forbedret varmeavledning. Hardcoat anodisert overflate gir økt styrke og motstand mot slitasje. Allsidig, 1-16" tvist-rifling stabiliserer et bredt utvalg av jakt- og konkurranseammunisjon. Installasjon kan kreve endring av fabrikkens kolbe.
Mer...
Kundevurderinger for TACTICAL SOLUTIONS, LLC THREADED FLUTED BARREL, MB
Antall vurderinger: 5
Fra brownells.com: 5
Gjennomsnittsvurdering: 3,4
Nice Barrel, Tough Install(23.08.2010)
I bought this to go on a customized ruger 10/22. In the end, this thing is sweet. Installation however, was a bit tougher than expected. I had a rough time getting the Ruger barrell out of my receiver, but that has nothing to do with this barrel. This barrel did however need to be sanded down to fit properly. The lug that sits in the recess in the receiver doesn't fit. I essentially had to sand off the finish to get a proper fit.
Once fitted, this barrel is sweet. The finish looks good, but does not match exactly that of the 10/22 receiver. Once together however, you hardly notice the difference.
The threads were nice and clean. The Tactical Solutions compensator screwed right on out of the box.
All in all, I'm happy with this barrel. It looks good, and shoots darn straight. Just don't expect a quick drop in install.
Super Lightweight Super Accurate(20.10.2010)
I installed this barrel, and zeroed my scope and at 50 yards. I shot the bulls-eye out if a target, just one big ragged hole. The barrel is super light weight and with the compensator it was surprisingly quiet.
Lightweight & Accurate(02.01.2012)
Great barrel to lighten and increase accuracy of a 10/22! Yes, you have to fit it to the receiver.. that's a good thing, folks! Wrap a piece of medium emery cloth around the shank and twist the barrel to evenly remove material. Check often for a tight fit. No problem and a no-slop fit. Substantial accuracy improvement. 100% reliability with various ammo makes (so far). I'll be buying another one for another 10/22 I'm building up.
Good quality, accurate, but design flaws(16.02.2015)
Overall, this product is good considering accuracy and aesthetics. However, I do not care for the aluminum in the muzzle threads and particularly on the breech face. High volume shooting will actually cause the steel bolt to dent the soft aluminum breech face. I switched to the Volquartsen carbon fiber barrel that has a SS breech and threads.
Maybe I got a lemon(17.07.2015)
Like everyone said in their review, this barrel requires sanding and fitment to work. I have less than 300 rounds in the barrel, and I recently found major defects in my barrel. Two sections of the bore started to bulge out. On further inspection, the barrel isn't straight. It has a slight curve. I've tried calling tactical solutions about this issue, but it appears that their customer service is nonexistent. Luckily, the Brownells staff is wonderful and walked me through the return process. I should mention that my original purchase date of this product was almost 3 years ago. For Brownells accepting a return that is over 2 years, that speaks volume about Brownells as a company.
Produktnr.: 100003816 TACTICAL SOLUTIONS, LLC THREADED FLUTED BARREL, MB Produsentnr.: 1022TE-MB856365001097 Drop-in, .22 LR målløpsbarrel har en premium, knappe-riflet, krom moly-fôring installert i et lettvekts aluminiumsskall for å oppnå matchgradsnøyaktighet og redusert vekt. Dype, CNC-maskinerte fluter bidrar til å holde løpsvekten nede på 1 lb., i tillegg til å øke stivheten og den totale overflatearealet for forbedret varmeavledning. Hardcoat anodisert overflate gir økt styrke og motstand mot slitasje. Allsidig, 1-16" tvist-rifling stabiliserer et bredt utvalg av jakt- og konkurranseammunisjon. Installasjon kan kreve endring av fabrikkens kolbe.
5899NOK6kr 5 899,00
*
Leveringstid ca. 14-21 dager. 6 stk. på lageret i USA
Krav til kjøpetillatelse eller våpenkort og legitimasjon dersom kjøper har våpen i samme kaliber.(Original kjøpetillatelse må sendes pr post. Ordre blir ikke effektuert før kjøpetillatelse eller annen dokumentasjon foreligger))
Top takeaways
Premium, knappe-riflet, krom moly-fôring i lettvekts aluminiumsskall gir matchgradsnøyaktighet og redusert vekt.
Dype, CNC-maskinerte fluter reduserer vekten til 1 lb. og forbedrer varmeavledning.
Hardcoat anodisert overflate gir økt styrke og motstand mot slitasje, med allsidig 1-16" tvist-rifling som stabiliserer et bredt utvalg av ammunisjon.
Made in USA
US eksport klassifisering: 0A501.c
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr.: 100005206 TACTICAL SOLUTIONS, LLC THREADED FLUTED BARREL, MS Produsentnr.: 1022TE-SIL856365001202 Drop-in, .22 LR målløpsbarrel har en premium, knappe-riflet, krom moly-fôring installert i et lettvekts aluminiumsskall for å oppnå matchgradsnøyaktighet og redusert vekt. Dype, CNC-maskinerte fluter bidrar til å holde løpsvekten nede på 1 lb., i tillegg til å øke stivheten og den totale overflatearealet for forbedret varmeavledning. Hardcoat anodisert overflate gir økt styrke og motstand mot slitasje. Allsidig, 1-16" tvist-rifling stabiliserer et bredt utvalg av jakt- og konkurranseammunisjon. Installasjon kan kreve endring av fabrikkens kolbe.
5899NOK3kr 5 899,00
*
Leveringstid ca. 14-21 dager. 3 stk. på lageret i USA
Krav til kjøpetillatelse eller våpenkort og legitimasjon dersom kjøper har våpen i samme kaliber.(Original kjøpetillatelse må sendes pr post. Ordre blir ikke effektuert før kjøpetillatelse eller annen dokumentasjon foreligger))
Top takeaways
Drop-in, .22 LR målløpsbarrel med premium, knappe-riflet, krom moly-fôring og lettvekts aluminiumsskall for matchgradsnøyaktighet.
Dype, CNC-maskinerte fluter reduserer vekten til 1 lb. og øker stivheten samt varmeavledningen.
Hardcoat anodisert overflate gir økt styrke og motstand mot slitasje, med en allsidig 1-16" tvist-rifling for stabilisering av ulike ammunisjonstyper.
Made in USA
US eksport klassifisering: 0A501.c
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Oppgrader din Ruger 10/22 med dette lette, flutede målløpsbarrel for økt nøyaktighet 🎯 og forbedret varmeavledning. Perfekt for jakt og konkurranse!
Drop-in, .22 LR target barrel features a premium, button-rifled, chrome moly liner installed in a lightweight aluminum shell to achieve match grade accuracy and reduced weight. Deep, CNC machined flutes help keep barrel weight to 1 lb., plus increase rigidity and overall surface area for improved heat dissipation. Hardcoat anodized surface delivers added strength and abrasion resistance. Versatile, 1-16" twist rifling stabilizes a wide variety of hunting and match ammunition. Installation may require alteration to factory stock.
Mer...
Reduserer vekt uten å gå på akkord med nøyaktighet
Drop-in, .22 LR målløpsbarrel har en premium, knappe-riflet, krom moly-fôring installert i et lettvekts aluminiumsskall for å oppnå matchgradsnøyaktighet og redusert vekt. Dype, CNC-maskinerte fluter bidrar til å holde løpsvekten nede på 1 lb., i tillegg til å øke stivheten og den totale overflatearealet for forbedret varmeavledning. Hardcoat anodisert overflate gir økt styrke og motstand mot slitasje. Allsidig, 1-16" tvist-rifling stabiliserer et bredt utvalg av jakt- og konkurranseammunisjon. Installasjon kan kreve endring av fabrikkens kolbe.
Mer...
Kundevurderinger for TACTICAL SOLUTIONS, LLC THREADED FLUTED BARREL, MB
Antall vurderinger: 5
Fra brownells.com: 5
Gjennomsnittsvurdering: 3,4
Nice Barrel, Tough Install(23.08.2010)
I bought this to go on a customized ruger 10/22. In the end, this thing is sweet. Installation however, was a bit tougher than expected. I had a rough time getting the Ruger barrell out of my receiver, but that has nothing to do with this barrel. This barrel did however need to be sanded down to fit properly. The lug that sits in the recess in the receiver doesn't fit. I essentially had to sand off the finish to get a proper fit.
Once fitted, this barrel is sweet. The finish looks good, but does not match exactly that of the 10/22 receiver. Once together however, you hardly notice the difference.
The threads were nice and clean. The Tactical Solutions compensator screwed right on out of the box.
All in all, I'm happy with this barrel. It looks good, and shoots darn straight. Just don't expect a quick drop in install.
Super Lightweight Super Accurate(20.10.2010)
I installed this barrel, and zeroed my scope and at 50 yards. I shot the bulls-eye out if a target, just one big ragged hole. The barrel is super light weight and with the compensator it was surprisingly quiet.
Lightweight & Accurate(02.01.2012)
Great barrel to lighten and increase accuracy of a 10/22! Yes, you have to fit it to the receiver.. that's a good thing, folks! Wrap a piece of medium emery cloth around the shank and twist the barrel to evenly remove material. Check often for a tight fit. No problem and a no-slop fit. Substantial accuracy improvement. 100% reliability with various ammo makes (so far). I'll be buying another one for another 10/22 I'm building up.
Good quality, accurate, but design flaws(16.02.2015)
Overall, this product is good considering accuracy and aesthetics. However, I do not care for the aluminum in the muzzle threads and particularly on the breech face. High volume shooting will actually cause the steel bolt to dent the soft aluminum breech face. I switched to the Volquartsen carbon fiber barrel that has a SS breech and threads.
Maybe I got a lemon(17.07.2015)
Like everyone said in their review, this barrel requires sanding and fitment to work. I have less than 300 rounds in the barrel, and I recently found major defects in my barrel. Two sections of the bore started to bulge out. On further inspection, the barrel isn't straight. It has a slight curve. I've tried calling tactical solutions about this issue, but it appears that their customer service is nonexistent. Luckily, the Brownells staff is wonderful and walked me through the return process. I should mention that my original purchase date of this product was almost 3 years ago. For Brownells accepting a return that is over 2 years, that speaks volume about Brownells as a company.