Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

CLYMER
RIMLESS RIFLE CHAMBERING REAMERS

184050400

Finest Workmanship & Quality; Made In USA From M-7 High Speed Steel

Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.

Note: If you do not see the caliber you are looking for below, please feel free to contact our Special Orders Department, as many additional items are avaliable from Clymer.

SPECS: RIFLE REAMERS - 6, right-hand cutting, straight flutes. Solid pilot, integral throat. Stocked in Rougher and Finisher. 7/16" round shank with 3/8" square drive. ¼" round shank on .22 RF. ORDERING: Advise: 1) Stock #. 2) Cartridge Caliber and Name.

Mer...

Ypperlig håndverk & kvalitet; Laget i USA fra M-7 Høyhastighetsstål

Laget av Clymer, en virkelig dedikert gruppe våpenentusiaster, fra materialer av høyeste kvalitet, M-7 Høyhastighetsstål. Dette er presisjonsverktøy for den profesjonelle børsemakeren og vil gi en levetid med tjeneste når de blir tatt godt vare på. Full garanti. Grovere verktøy er .010" mindre i diameter enn den endelige størrelsen, kutter ikke halsområdet og bør brukes for å spare slitasje på Finish Reamer når mange kamre skal skjæres. Hvis det bare skal skjæres noen få kamre, er en Finish Reamer alt du trenger. Superb kvalitetsreamere laget etter SAAMI-spesifikasjoner.

Merk: Hvis du ikke finner kaliberet du leter etter nedenfor, ikke nøl med å kontakte vår avdeling for spesialbestillinger, ettersom mange flere produkter er tilgjengelige fra Clymer.

SPESIFIKASJONER: RIFLE REAMERS - 6, høyrehånds kutting, rette fløyter. Fast pilot, integrert hals. Lagerført som Grover og Finisher. 7/16" rundt skaft med 3/8" firkantet drivverk. ¼" rundt skaft på .22 RF. BESTILLING: Oppgi: 1) Lagernr. 2) Patronkaliber og navn.

Mer...

Kundevurderinger for CLYMER 308 WINCHESTER FINISHING REAMER

Antall vurderinger: 9
Fra brownells.com: 9
Gjennomsnittsvurdering: 3,7

Works well (11.06.2011)

Using the methods outlined in Sweeney's AR-15 Gunsmithing volume, and lubed with Do-Drill, I was able to adjust the headspace on a new, non-chromed barrel. Less than a half-dozen turns brought the chamber to the point where the stripped bolt would just close on a Clymer GO gauge. With the gauge then lengthened by .003" using a piece of tape, I further adjusted the headspace with an additional 3/4 turn of the reamer. Now the bolt closes on the lengthened gauge but not on a NO-GO gauge. This should produce an accurate rifle.

Beautiful finishing reamer (30.04.2015)

Leaves a great finish, spec's out perfectly, and is a great value for the money.

Sharp as a razor (11.05.2015)

I used this to hand ream a short chambered barrel there was no chatter what-so-ever and the chamber was left with a mirror-like finish. I used plain ATF to lubricate this reamer and it worked great. It finished the chamber in 4 or 5 passes.

Good reamer (01.12.2013)

I heard bad things about Clymer reamers, but wasn't disappointed. Cut the chamber smooth and chatter free. I am happy.

Chatter (27.09.2010)

Clymer reamers have become notorious for chatter lately. I have had a couple that chattered, and several of my Gunsmith colleagues have had the same thing. I would not recommend the reamers by this company, as their quality has gone downhill in the past few years. My reamer chattered so bad so fast that the chamber was almost not salvageable.

Excessive chatter (12.09.2009)

Having used Clymer reramers in the past, I expected no problems. When I used this reamer it started to chatter immediately. Regardless of lathe speed or feed rate I was unable to eliminate the chatter. Thanks to the folks at Brownells, I was not stuck with this poorly made tool. I will continue to use Clymer reamers in the future, which I already have, but will think twice before buying another one.

CLYMER REAMER in .243 Winchester (14.10.2017)

If It works as intended, I shall be able to close my Remington 700 bolt with a cartridge in place with ease. My new Shilen 26" Chrome-Moly barrel with 1 in 10" twist is beautiful and almost ready to lock-and-load. So, I will inform you soon as to how the reamer performed. My main bullets are: Hornaday 75 grain V-Max and Swift Scirocco II 90 grain Bonded. I have no images yet, because I am not ready to disclose my findings. Cliffy

not worth spending the money on (04.03.2010)

Bought Clymer reamer because of reputation - MISTAKE. Even with a floating reamer holder, I couldn't make it stop chattering. Had to set barrel back & start over with another brand of reamer (worked great)

.223 reamer...finishing (08.06.2011)

This was used to extend the life of AR15 barrels that were getting a little long in the throat. The barrel extension is removed, 0.062 removed from the barrel shoulder (one thread) and the reamer is used to deepen the chamber 0.060. A "shot out" Krieger and a RR barrel were renewed and their usable lives were extended by a 2-3 thousand rounds.

Les 9 flere anmeldelser fra brownells.com

2199 3399 30 NOK

Produktnr.: 184050400
CLYMER 308 WINCHESTER FINISHING REAMER
Produsentnr.: F308WIN Laget av Clymer, en virkelig dedikert gruppe våpenentusiaster, fra materialer av høyeste kvalitet, M-7 Høyhastighetsstål. Dette er presisjonsverktøy for den profesjonelle børsemakeren og vil gi en levetid med tjeneste når de blir tatt godt vare på. Full garanti. Grovere verktøy er .010" mindre i diameter enn den endelige størrelsen, kutter ikke halsområdet og bør brukes for å spare slitasje på Finish Reamer når mange kamre skal skjæres. Hvis det bare skal skjæres noen få kamre, er en Finish Reamer alt du trenger. Superb kvalitetsreamere laget etter SAAMI-spesifikasjoner.

2799 NOK 15 kr 2 799,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Kaliber: 308 Winchester Style: Rimless Rifle

CLYMER RIMLESS RIFLE CHAMBERING REAMERS

Kundevurderinger for CLYMER 308 WINCHESTER FINISHING REAMER

Top takeaways

Attributes

Elementdetaljer

Kundevurderinger for CLYMER 308 WINCHESTER FINISHING REAMER

Koble til

Sikre betalingsmåter

Bransjeorganisasjoner

Velkommen!

CLYMER
RIMLESS RIFLE CHAMBERING REAMERS