A full-length sizing die is designed to resize the entire length of the cartridge case, not just the neck. Unlike neck-sizing dies, which only resize the neck portion, full-length sizing dies are versatile and suitable for any rifle chambered in the same cartridge. When you fire a cartridge, the brass case expands to fit the chamber of your rifle. After firing, the case contracts slightly, but it may not return to its original dimensions. The full-length sizing die restores the case to the correct dimensions by resizing both the neck and body. It also removes any bulges or irregularities caused during firing. Setting up a full-length sizing die involves several steps: Clean the outside of the fired cases with alcohol and a cloth. Zero out the calipers using a headspace comparator and a fired case. Install the full-length sizing die and adjust it gradually until the case shoulder is bumped back by 0.001 inch. Lock the die and lubricate the cases before sizing them. Check the shoulder bump every 10 cases or so and adjust the die if needed. Avoid overworking the brass to prevent case head separation.
Mer...
39939920NOK
Produktnr.: 430109149 LEE PRECISION 350 LEGEND FULL LENGTH SIZING DIE ONLY Produsentnr.: 91140734307911409
399NOK10kr 399,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Spesifikasjoner:Die Style: Full Length Sizing DieKaliber: 350 Legend
A full-length sizing die is designed to resize the entire length of the cartridge case, not just the neck. Unlike neck-sizing dies, which only resize the neck portion, full-length sizing dies are versatile and suitable for any rifle chambered in the same cartridge. When you fire a cartridge, the brass case expands to fit the chamber of your rifle. After firing, the case contracts slightly, but it may not return to its original dimensions. The full-length sizing die restores the case to the correct dimensions by resizing both the neck and body. It also removes any bulges or irregularities caused during firing. Setting up a full-length sizing die involves several steps: Clean the outside of the fired cases with alcohol and a cloth. Zero out the calipers using a headspace comparator and a fired case. Install the full-length sizing die and adjust it gradually until the case shoulder is bumped back by 0.001 inch. Lock the die and lubricate the cases before sizing them. Check the shoulder bump every 10 cases or so and adjust the die if needed. Avoid overworking the brass to prevent case head separation.