BROWNELLS
REMINGTON 700 RIVETED EXTRACTOR KITS

080000208

Factory-Type Replacement Restores Function & Serviceability

Replaces the no-longer-available Remington factory part to keep older rifles shooting. A fast, economical, alternative to returning rifle to the factory for repair. Replacement requires no modification to bolt or rifle. Fits all variations of 700, 600, 600M, 660, 742, 760, 788, 40X and XP-100. Small fits calibers with .378" (9.60mm) diameter case head, including .17 Rem., .222, .223, etc.

SPECS: Steel. Includes extractor, (2) rivets, and instructions. Gunsmith installation required.

Mer...

Fabrikklignende erstatning gjenoppretter funksjon og servicevennlighet

Erstatter den ikke-lenger-tilgjengelige fabrikkdelen fra Remington for å holde eldre rifler i skyteklar stand. En rask og økonomisk løsning i stedet for å sende riflen tilbake til fabrikken for reparasjon. Bytte krever ingen modifikasjon av bolten eller riflen. Passer alle varianter av 700, 600, 600M, 660, 742, 760, 788, 40X og XP-100. Small passer kalibre med .378" (9.60mm) diameter på hylsehodet, inkludert .17 Rem., .222, .223, osv.

SPECS: Stål. Inkluderer ekstraktor, (2) niter, og instruksjoner. Gunsmith-installasjon kreves.

Mer...

Kundevurderinger for BROWNELLS REMINGTON 700-STYLE RIVETED EXTRACTOR KIT SMALL

Antall vurderinger: 2
Fra brownells.com: 2
Gjennomsnittsvurdering: 4,5

that was so easy (26.05.2010)

My extractor start slippin off the rounds while cycling the bolt. I had about 2300 rds on it. I know better than to do a Sako mod to a Remmy bolt so I got the original style...very easy to do. Extracts round wit ease...let's see another 2300 minimum. This extactor lips is about 2 millimeters wider than original. Should last a lot longer

Just the first try, but... (18.09.2013)

After checking with Brownell's techs, and getting a negative, I decided to take a chance and try this on a 7 mag. I had already determined that the factory part would not hold its shape from a failed try. The main material of the Brownell's is not quite a thou thicker than the original. The hook seems correctly located. The hook itself is about 0.010" thicker than the 7 mag. But bevels normally have to be cut anyway, so I figured that that could come down with the rest. After bevelling, I discovered that the rivet head must be fully flush, unlike "normal fit". But that was also easy with the stone still in the grinder. IT WORKED! Also, with normal instructions to "bend the ends in", the '06 head took care of that. Both bends at the end of the hook required some straightening. But I should give the standard disclaimer that your results may vary. Brownell does NOT recommend this, nor do I at this stage. I'll have to do a couple more to feel confident. But that will be my first choice next time.

Les 2 flere anmeldelser fra brownells.com

0 0 1 NOK

Produktnr.: 080000208
BROWNELLS REMINGTON 700-STYLE RIVETED EXTRACTOR KIT SMALL Erstatter den ikke-lenger-tilgjengelige fabrikkdelen fra Remington for å holde eldre rifler i skyteklar stand. En rask og økonomisk løsning i stedet for å sende riflen tilbake til fabrikken for reparasjon. Bytte krever ingen modifikasjon av bolten eller riflen. Passer alle varianter av 700, 600, 600M, 660, 742, 760, 788, 40X og XP-100. Small passer kalibre med .378" (9.60mm) diameter på hylsehodet, inkludert .17 Rem., .222, .223, osv.

Varsle ved tilgjengelighet

Ikke tilgjengelig.

Spesifikasjoner: Make: Remington Modell: 700

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Erstatter fabrikkdelen fra Remington for å holde eldre rifler i skyteklar stand uten behov for fabrikksreparasjon.
Passer alle varianter av Remington 700, 600, 600M, 660, 742, 760, 788, 40X og XP-100, med kalibre som har .378" diameter på hylsehodet.
Inkluderer ekstraktor, (2) niter, og instruksjoner; krever installasjon av gunsmith.