PRECISION ARMAMENT
REMINGTON 700 PICATINNY SCOPE BASE

100011239

Lightweight Mount With The Strength Of Steel & Only 1/3 The Weight

MIL-STD 1913 Picatinny rail is machined from lightweight Tennalum® 7068 alloy that gives the same strength as steel with only ¹/³ the weight. All contact surfaces are stress relieved and pre-ground before final machining to exact MIL-STD 1913 dimensions. Integral recoil lug and elongated mounting screws let you position the rail so the lug will bear properly against the receiver to prevent the rail from moving even under aggressive recoil. Built in 20 MOA of elevation for extended long-range shooting. All surfaces are fully chamfered, with extra clearance over the ejection port.

SPECS: Tennalum 7068 alloy, hardcoat anodized, matte black finish. Instructions and 6-48 mounting screws included. Short Action (SA) – 6½" (16.5 cm) long, .380” (9.4 mm) high at front ring, 2.3 oz. (.65g) wt.

Mer...

Lettvektsmontasje Med Stålens Styrke & Kun 1/3 Av Vekten

MIL-STD 1913 Picatinny-skinne er maskinert fra lett Tennalum® 7068-legering som gir samme styrke som stål med bare ¹/³ av vekten. Alle kontaktoverflater er spenningsfrie og forslipet før endelig maskinering til nøyaktige MIL-STD 1913-dimensjoner. Integrert rekylkile og forlengede monteringsskruer lar deg posisjonere skinnen slik at kilen vil bære ordentlig mot mottakeren for å forhindre at skinnen beveger seg, selv under aggressiv rekyl. Innebygd 20 MOA høyde for utvidet skyting på lang rekkevidde. Alle overflater er fullstendig avfaset, med ekstra klaring over utkasterporten.

SPECS: Tennalum 7068-legering, hardcoat anodisert, matt svart finish. Instruksjoner og 6-48 monteringsskruer inkludert. Kort handling (SA) – 6½" (16,5 cm) lang, .380” (9,4 mm) høy ved forreste ring, 2,3 oz. (65g) vekt.

Mer...

Kundevurderinger for PRECISION ARMAMENT REMINGTON 700 PICATINNY SCOPE BASE, SA

Antall vurderinger: 3
Fra brownells.com: 3
Gjennomsnittsvurdering: 5

Very High Quality Base! (11.05.2013)

I am very happy with this purchase! The quality of this base is amazing. I bought this on a whim over another manufacture that is know for making very good products. I am definitely glad that I gave this base a chance. The anodizing on it is very nice finish. It does not have any sharp edges and the recoil lug is just the right size. It fits perfectly on my Remington 700 I do not have any gap at all. It is obvious that no corner were skipped in the making this base. I would recommend this base without hesitation. It is worth the money!

No bedding was needed (15.01.2014)

There were several mounts available, and I chose this one ONLY because another reviewer stated that he did not need to bed the mount to the rifle.

I also had no need to bed the mount.

I only put in the front two bolts and hand tightened. Checking the back of the mount, no light comes through and a dollar bill can not fit between the mount and rifle receiver. Removed the two screws, and put in the rear two bolts and hand tightened. Checking the front of the mount, no light comes through and a dollar bill can not fit.

I don't know if people need to bed their mount because of problems with the mount or problems with the receiver. I am just happy that in my case there was no bedding necessary.

Also a big thanks to Brownell staff for helping me select the right mount and rings.

No bedding needed. Excellent fit/finish (06.05.2015)

This unit is lightweight, but quite strong. The finish is even and matches the stock finish of my Remington 700 well. No bedding was needed to install the mount on the receiver, which is a huge plus. The machining is excellent. There are other great mounts out there, but this one is also a great price comparatively. I would not hesitate to buy another one for any future builds.

Les 3 flere anmeldelser fra brownells.com

2399 2399 1 NOK

Produktnr.: 100011239
PRECISION ARMAMENT REMINGTON 700 PICATINNY SCOPE BASE, SA
Produsentnr.: A12001 MIL-STD 1913 Picatinny-skinne er maskinert fra lett Tennalum® 7068-legering som gir samme styrke som stål med bare ¹/³ av vekten. Alle kontaktoverflater er spenningsfrie og forslipet før endelig maskinering til nøyaktige MIL-STD 1913-dimensjoner. Integrert rekylkile og forlengede monteringsskruer lar deg posisjonere skinnen slik at kilen vil bære ordentlig mot mottakeren for å forhindre at skinnen beveger seg, selv under aggressiv rekyl. Innebygd 20 MOA høyde for utvidet skyting på lang rekkevidde. Alle overflater er fullstendig avfaset, med ekstra klaring over utkasterporten.

2399 NOK 4 kr 2 399,00 *

Leveringstid ca. 14-21 dager.
4 stk. på lageret i USA

Spesifikasjoner: Action Fit: Remington 700 (Short) Farge: Black Finish: Black Make: Remington Material: Aluminum Modell: 700 Number of Bases: 1-Piece Style: Tactical Bases, Picatinny

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

MIL-STD 1913 Picatinny-skinne laget av Tennalum® 7068-legering, som gir stålstyrke med en tredjedel av vekten.
Innebygd 20 MOA høyde for langdistanse skyting og integrert rekylkile for å forhindre bevegelse under aggressiv rekyl.
Leveres med instruksjoner og 6-48 monteringsskruer, og har en hardcoat anodisert, matt svart finish.

Attributes

Action Fit: Remington 700 (Short) Farge: Black Finish: Black Make: Remington Material: Aluminum Modell: 700 Number of Bases: 1-Piece Style: Tactical Bases,Picatinny Leveringsvekt: 0,159kg Frakthøyde: 24mm Fraktbredde: 24mm Fraktlengde: 164mm