Fully Adjustable, Easy Installation; Rugged Aluminum Housing Adjustable trigger kit lets you select the weight of pull, let-off, and overtravel that best suit your style of shooting. Comfortable, .330" factory width, trigger shoe delivers excellent feel, vertical grooves give positive purchase. Housing is CNC machined from aluminum billet; provides greater internal clearance to reduce drag and produce a smooth felt pull. Available in four weight-of-pull ranges. Models for pre-2006 manufactured rifles retain the factory safety lever and bolt release. Fits Remington 700, 40X, and pre-2006 Model Seven rifles.
SPECS: Housing - T6-6061 aluminum, hardened. Machined and hardened steel levers and pins. Pre-2006 triggers fit Rem 700, 40X, and Model Seven rifles without X-Mark Pro triggers and manufactured prior to 2006. Right hand only. Adjustable pull weight: L-1 - 1½ lb. to 3 lb.
Fullt justerbart, enkel installasjon; Robust aluminiumshus Justerbart avtrekksett lar deg velge avtrekksvekt, utkobling og overstyring som best passer din skytestil. Komfortabelt, .330" fabrikkbredde, avtrekkersko gir utmerket følelse, vertikale riller gir sikkert grep. Huset er CNC-maskinert fra aluminiumsblokk; gir større intern klaring for å redusere friksjon og produsere en jevn følt avtrekksvekt. Tilgjengelig i fire avtrekksvektområder. Modeller for rifler produsert før 2006 beholder fabrikkens sikkerhetshevarm og boltslipp. Passer til Remington 700, 40X og Model Seven rifler produsert før 2006.
SPECS: Hus - T6-6061 aluminium, herdet. Maskinerte og herdede stålhevarmer og -pinner. Avtrekkere før 2006 passer til Rem 700, 40X og Model Seven rifler uten X-Mark Pro avtrekkere og produsert før 2006. Kun for høyrehendte. Justerbar avtrekksvekt: L-1 - 1½ lb. til 3 lb.
Mer...
Kundevurderinger for RIFLE BASIX L-1 CUSTOM TRIGGER FITS PRE-2006
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,3
Nice trigger assembly easy to install(17.03.2011)
This I installed myself a novice. It took a few times to get the spring that hold bolt catch in place. It's not mentioned in the instructions,it took some head scratching,cussing and then my HS-Precision Sand/black web Trapper 700 308 LT Tactical with fluted barrel w/56mm Trijicon is almost done. It should have a quick release swivel for a bi-pod but then complete! If I did it you can do it!!
Would look elsewhere for a replacement(28.10.2011)
Instructions were poor at best...got frustrated before even getting if completely installed; was hoping for a little more improvement over the numerous Timneys I have installed in customer guns, but this isn't it. Guess I will go back to Timney until something better comes along.
Great Trigger breaks clean and crisp (09.10.2014)
I was pleasantly surprised by this trigger. I bought it because i didn't want to wait for a Jewell trigger on back order. I love the trigger it came adjusted beautifully and is well tuned! I really can not tell any difference in the trigger pull or smoothness of this trigger versus my Jewell hvr triggers. The only thing I don't like is the trigger itself feels like it is cheaply chrome plated rather than machined like the jewel. But I can get over than real quick when I start shooting! This is a huge upgrade over the stock trigger and worlds better than any timney I've ever owned. In fact I have sold all my timneys and will never buy another one. This is the same price as a timney and has the quality performance of the Jewell!
P.s.
This trigger installs the same as every other Remington 700 trigger it is not hard to install.
Crisp and Precise(14.02.2013)
I Received the Remington Action 700 Rifle Basix L-1K trigger today. Following the simple and straight forward Remington 700 Install Video (found on the RB website), I had it installed in 15 minutes with no problems. My requested L-1 1.5# setting works Superbly...surprise release, breaks like glass, no creep or over-travel, and feels really Great...WOW!
I'll be taking my new custom .30-06 out to the range for barrel, action, trigger break-in and load ballistics testing. With this L-1 Rifle Basix trigger installed, I'm sure to get the best that this rifle is capable of shooting. Now, if I can just fix the uncontrollable variable...Me!
L-1 Triggers in Rem 700 PSS(22.07.2014)
I have the L-1 installed in both of my Rem 700 PSS, both 308 and 223 for the last 10+ yrs and 5000+ rounds each. Fairly easy to install with orig factory safeties. Called Rifle Basix with questions, and, he was extremely helpful with customer service. Set up each for safe operation at approx 2 1/2 lbs. Once set up and screws lock-tighted... has not changed at all. Every 1000+ or more rounds, I pull the receiver and clean sear mating surfaces with a small strip of clean paper through the keyhole, and reassemble. Good for another 1-2000 rounds unless minor dirt creeps in. I originally chose these over the other quality triggers because I wanted the orig Rem trigger style... wide surface and grooved. I normally shoot paper at 100-200 and metal silhouettes out to 800 yds and beyond. With these triggers and proper rifle setup, I can almost get benchrest accuracy at 100... 1/4" with 223 and under 1/2" 308, and hit bowling pins at 800 yds. I am Extremely Happy with these triggers and would recommend these to others. (former NRA instructor and shooting enthusiast).
Seemed like lower quality vs others(12.09.2014)
One of my function / safety tests is to tap lightly on the side of the action with a rubber mallet with the safety off to see if the firing pin drops. The Rifle Basix trigger set at 3.5 lbs would reliably drop the firing pin on the first or second tap . I haven't had any other 3.5lb+ trigger drop the firing pin. (I don't use any lighter pull weight). Take it FWIW - If you were to possibly hit or drop the rifle, situation would probably dictate that you have the safety on, or carry the rifle unloaded. I liked that the trigger shoe is similar to factory.
Excellent Trigger(27.09.2009)
Easy to install and adjust if needed and is easily converted for left hand rifles
Produktnr.: 758700001 RIFLE BASIX L-1 CUSTOM TRIGGER FITS PRE-2006 Produsentnr.: L1SILVER891678000016 Fullt justerbart, enkel installasjon; Robust aluminiumshus Justerbart avtrekksett lar deg velge avtrekksvekt, utkobling og overstyring som best passer din skytestil. Komfortabelt, .330" fabrikkbredde, avtrekkersko gir utmerket følelse, vertikale riller gir sikkert grep. Huset er CNC-maskinert fra aluminiumsblokk; gir større intern klaring for å redusere friksjon og produsere en jevn følt avtrekksvekt. Tilgjengelig i fire avtrekksvektområder. Modeller for rifler produsert før 2006 beholder fabrikkens sikkerhetshevarm og boltslipp. Passer til Remington 700, 40X og Model Seven rifler produsert før 2006.
2549NOK2kr 2 549,00
*
Leveringstid ca. 14-21 dager. 2 stk. på lageret i USA
Fullt justerbart avtrekksett med enkel installasjon og robust aluminiumshus, designet for Remington 700, 40X og Model Seven rifler produsert før 2006.
Tilbyr justerbar avtrekksvekt, utkobling og overstyring for å passe din skytestil, med en komfortabel avtrekkersko på .330" bredde og vertikale riller for sikkert grep.
Huset er CNC-maskinert fra T6-6061 aluminium, med herdede stålkomponenter, og avtrekksvekt justerbar fra 1½ lb. til 3 lb.
Made in USA
US eksport klassifisering: 0A501.c
Erklæring om kontroll av destinasjon: Disse artiklene er underlagt kontroll av den amerikanske regjering og er kun godkjent for eksport til destinasjonslandet, for anvendelse av den endelige mottager eller sluttbruker(ene), heri identifisert. De skal ikke videreselges, overføres eller på annen måte avhendes til et annet land eller til en annen person enn den godkjente mottakeren eller sluttbrukeren(ene), enten i sin opprinnelige form eller etter innlemmelse i andre artikler, uten først å få godkjenning fra den amerikanske regjering eller dersom godkjennelse følger av amerikanske lover eller forskrifter.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr.: 758000017 RIFLE BASIX L-1K CUSTOM TRIGGER FITS 2006 & LATER Produsentnr.: L-1 K SILVER891678000344 Fullt justerbart, enkel installasjon; Robust aluminiumshus Justerbart avtrekksett lar deg velge avtrekksvekt, utkobling og overstyring som best passer din skytestil. Komfortabelt, .330" fabrikkbredde, avtrekkersko gir utmerket følelse, vertikale riller gir sikkert grep. Huset er CNC-maskinert fra aluminiumsblokk; gir større intern klaring for å redusere friksjon og produsere en jevn følt avtrekksvekt. Tilgjengelig i fire avtrekksvektområder. Modeller for rifler produsert før 2006 beholder fabrikkens sikkerhetshevarm og boltslipp. Passer til Remington 700, 40X og Model Seven rifler produsert før 2006.
3249NOK3kr 3 249,00
*
Leveringstid ca. 14-21 dager. 3 stk. på lageret i USA
Produktnr.: 758000018 RIFLE BASIX LV-1K CUSTOM TRIGGER FITS 2006 & LATER Produsentnr.: LV-1 K SILVER891678000351 Fullt justerbart, enkel installasjon; Robust aluminiumshus Justerbart avtrekksett lar deg velge avtrekksvekt, utkobling og overstyring som best passer din skytestil. Komfortabelt, .330" fabrikkbredde, avtrekkersko gir utmerket følelse, vertikale riller gir sikkert grep. Huset er CNC-maskinert fra aluminiumsblokk; gir større intern klaring for å redusere friksjon og produsere en jevn følt avtrekksvekt. Tilgjengelig i fire avtrekksvektområder. Modeller for rifler produsert før 2006 beholder fabrikkens sikkerhetshevarm og boltslipp. Passer til Remington 700, 40X og Model Seven rifler produsert før 2006.
3499NOK2kr 3 499,00
*
Leveringstid ca. 14-21 dager. 2 stk. på lageret i USA
Produktnr.: 758000019 RIFLE BASIX ERV-3K CUSTOM TRIGGER FITS 2006 & LATER Produsentnr.: ERV-3K SILVER891678000368 Fullt justerbart, enkel installasjon; Robust aluminiumshus Justerbart avtrekksett lar deg velge avtrekksvekt, utkobling og overstyring som best passer din skytestil. Komfortabelt, .330" fabrikkbredde, avtrekkersko gir utmerket følelse, vertikale riller gir sikkert grep. Huset er CNC-maskinert fra aluminiumsblokk; gir større intern klaring for å redusere friksjon og produsere en jevn følt avtrekksvekt. Tilgjengelig i fire avtrekksvektområder. Modeller for rifler produsert før 2006 beholder fabrikkens sikkerhetshevarm og boltslipp. Passer til Remington 700, 40X og Model Seven rifler produsert før 2006.
3949NOK1kr 3 949,00
*
Leveringstid ca. 14-21 dager. 1 stk. på lageret i USA
Fully Adjustable, Easy Installation; Rugged Aluminum Housing Adjustable trigger kit lets you select the weight of pull, let-off, and overtravel that best suit your style of shooting. Comfortable, .330" factory width, trigger shoe delivers excellent feel, vertical grooves give positive purchase. Housing is CNC machined from aluminum billet; provides greater internal clearance to reduce drag and produce a smooth felt pull. Available in four weight-of-pull ranges. Models for pre-2006 manufactured rifles retain the factory safety lever and bolt release. Fits Remington 700, 40X, and pre-2006 Model Seven rifles.
SPECS: Housing - T6-6061 aluminum, hardened. Machined and hardened steel levers and pins. Pre-2006 triggers fit Rem 700, 40X, and Model Seven rifles without X-Mark Pro triggers and manufactured prior to 2006. Right hand only. Adjustable pull weight: L-1 - 1½ lb. to 3 lb.
Fullt justerbart, enkel installasjon; Robust aluminiumshus Justerbart avtrekksett lar deg velge avtrekksvekt, utkobling og overstyring som best passer din skytestil. Komfortabelt, .330" fabrikkbredde, avtrekkersko gir utmerket følelse, vertikale riller gir sikkert grep. Huset er CNC-maskinert fra aluminiumsblokk; gir større intern klaring for å redusere friksjon og produsere en jevn følt avtrekksvekt. Tilgjengelig i fire avtrekksvektområder. Modeller for rifler produsert før 2006 beholder fabrikkens sikkerhetshevarm og boltslipp. Passer til Remington 700, 40X og Model Seven rifler produsert før 2006.
SPECS: Hus - T6-6061 aluminium, herdet. Maskinerte og herdede stålhevarmer og -pinner. Avtrekkere før 2006 passer til Rem 700, 40X og Model Seven rifler uten X-Mark Pro avtrekkere og produsert før 2006. Kun for høyrehendte. Justerbar avtrekksvekt: L-1 - 1½ lb. til 3 lb.
Mer...
Kundevurderinger for RIFLE BASIX L-1 CUSTOM TRIGGER FITS PRE-2006
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 4,3
Nice trigger assembly easy to install(17.03.2011)
This I installed myself a novice. It took a few times to get the spring that hold bolt catch in place. It's not mentioned in the instructions,it took some head scratching,cussing and then my HS-Precision Sand/black web Trapper 700 308 LT Tactical with fluted barrel w/56mm Trijicon is almost done. It should have a quick release swivel for a bi-pod but then complete! If I did it you can do it!!
Would look elsewhere for a replacement(28.10.2011)
Instructions were poor at best...got frustrated before even getting if completely installed; was hoping for a little more improvement over the numerous Timneys I have installed in customer guns, but this isn't it. Guess I will go back to Timney until something better comes along.
Great Trigger breaks clean and crisp (09.10.2014)
I was pleasantly surprised by this trigger. I bought it because i didn't want to wait for a Jewell trigger on back order. I love the trigger it came adjusted beautifully and is well tuned! I really can not tell any difference in the trigger pull or smoothness of this trigger versus my Jewell hvr triggers. The only thing I don't like is the trigger itself feels like it is cheaply chrome plated rather than machined like the jewel. But I can get over than real quick when I start shooting! This is a huge upgrade over the stock trigger and worlds better than any timney I've ever owned. In fact I have sold all my timneys and will never buy another one. This is the same price as a timney and has the quality performance of the Jewell!
P.s.
This trigger installs the same as every other Remington 700 trigger it is not hard to install.
Crisp and Precise(14.02.2013)
I Received the Remington Action 700 Rifle Basix L-1K trigger today. Following the simple and straight forward Remington 700 Install Video (found on the RB website), I had it installed in 15 minutes with no problems. My requested L-1 1.5# setting works Superbly...surprise release, breaks like glass, no creep or over-travel, and feels really Great...WOW!
I'll be taking my new custom .30-06 out to the range for barrel, action, trigger break-in and load ballistics testing. With this L-1 Rifle Basix trigger installed, I'm sure to get the best that this rifle is capable of shooting. Now, if I can just fix the uncontrollable variable...Me!
L-1 Triggers in Rem 700 PSS(22.07.2014)
I have the L-1 installed in both of my Rem 700 PSS, both 308 and 223 for the last 10+ yrs and 5000+ rounds each. Fairly easy to install with orig factory safeties. Called Rifle Basix with questions, and, he was extremely helpful with customer service. Set up each for safe operation at approx 2 1/2 lbs. Once set up and screws lock-tighted... has not changed at all. Every 1000+ or more rounds, I pull the receiver and clean sear mating surfaces with a small strip of clean paper through the keyhole, and reassemble. Good for another 1-2000 rounds unless minor dirt creeps in. I originally chose these over the other quality triggers because I wanted the orig Rem trigger style... wide surface and grooved. I normally shoot paper at 100-200 and metal silhouettes out to 800 yds and beyond. With these triggers and proper rifle setup, I can almost get benchrest accuracy at 100... 1/4" with 223 and under 1/2" 308, and hit bowling pins at 800 yds. I am Extremely Happy with these triggers and would recommend these to others. (former NRA instructor and shooting enthusiast).
Seemed like lower quality vs others(12.09.2014)
One of my function / safety tests is to tap lightly on the side of the action with a rubber mallet with the safety off to see if the firing pin drops. The Rifle Basix trigger set at 3.5 lbs would reliably drop the firing pin on the first or second tap . I haven't had any other 3.5lb+ trigger drop the firing pin. (I don't use any lighter pull weight). Take it FWIW - If you were to possibly hit or drop the rifle, situation would probably dictate that you have the safety on, or carry the rifle unloaded. I liked that the trigger shoe is similar to factory.
Excellent Trigger(27.09.2009)
Easy to install and adjust if needed and is easily converted for left hand rifles