Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

SURGEON RIFLES
REMINGTON 700 ACTION WRENCH

100003675

Prevents Damage When Installing Barrel On Surgeon Or Remington 700 Action

Easy-to-use alternative to old-fashioned T-handle action wrenches is specifically designed to prevent damage to receiver when installing and removing barrels. Lets you torque a Remington 700 or Surgeon Rifles action as close as possible to the barrel threads to eliminate unwanted twisting or bowing of the action that can result in distorted bolt raceways and other expensive damage. Inserts in the ejection port; the two “ears” fit in the raceways at the front ring. Insert a ½" drive ratchet handle or torque wrench and tighten/loosen the action to the barrel. Works on any length action.

SPECS: Steel, black oxide finish. Fits Remington 700 and Surgeon Rifles receivers. Do not exceed 100 foot pounds torque.

Mer...

Forhindrer Skade Ved Montering Av Løp På Surgeon Eller Remington 700 Mottaker

Enkelt-i-bruk alternativ til gammeldagse T-håndtak nøkler, spesielt designet for å forhindre skade på mottakeren ved installasjon og fjerning av løp. Lar deg bruke dreiemoment på en Remington 700 eller Surgeon Rifles mottaker så nær løpstrådene som mulig for å eliminere uønsket vridning eller bøyning av mottakeren som kan føre til forvrengte boltrammer og annen kostbar skade. Settes inn i utkasterporten; de to "ørene" passer i løpsbanene ved forreste ring. Sett inn et ½" drevet skrallehåndtak eller momentnøkkel og stram/løsne mottakeren til løpet. Fungerer på mottakere av hvilken som helst lengde.

SPECS: Stål, sort oksidfinish. Passer til Remington 700 og Surgeon Rifles mottakere. Ikke overskrid 100 fotpund dreiemoment.

Mer...

Kundevurderinger for SURGEON RIFLES SURGEON ACTION WRENCH

Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 4,5

you can use a tourque wrench (09.04.2010)

consistancy and accuracy are key in all gunsmithing with this wrench you can achive more acurate results. This wrench is much tougher than it looks used it to remove a action that had been locktighted to the barrel applied apx 200 ftlbs of tourqe to remove the action so far both the wrench and action apear to have survivied just fine.

A must have (07.09.2010)

Engineered to perfection.This product made short work of a professional barrel installation.No fear of damaging a very expensive receiver .

small but strong (11.04.2012)

made for right handed rifles only,do not try to make work in a lefty,will ruin the receiver!

Excellent tool (02.06.2012)

This is a well engineered tool, it was strong enough to remove and install my new barrel with ease, without a giant clamp marring the outside of my receiver. The only problem with it is that it changes the amount of torque needed to reach a certian ft/lb. It would be nice if Surgeon would provide information on proper torque readings. well worth the $$.

Don't buy ONE, Buy TWO of them..... (29.03.2013)

I love the way it works for my RH M700 applications. I removed some pretty stubborn factory barrels. It BROKE after 6x removals. I emailed the Surgeon folks in Prague, OK and they reminded me that this wrench was NOT for barrel removal but just intalling and removing custom (not factory barrel jobs) barrel arrangements. They were impressed when I reported that I got SIX removals accomplished; they sent me another one for FREE. What gr8 service is that, eh? So now I bought a very serious, "Through the receiver" Action wrench for serious barrel removals, and this Surgeon tool for the installations and subsequent removals or swaps. Life does not get better. Still using it but my buddy took mine and left me several bzzr in exchange. Now I need another one. I loved the Surgeon factory so much, I bought a $1200 Surgeon 591 action just to honor their work ethic. Now I'm a 'fanboy' ha ha ha ha. Peace be to journey.

Good for right hand rifles DOES NOT WORK (10.09.2013)

Was dissapointed it does not work on left hand models. I have been working on a lot of LEFT hand sniper rifles and this product does-not work on them :( so be ware It doese work well for righties

Great product (29.03.2017)

We have several of these in our shop. Our custom action is, like many, very similar to the Rem 700 and this wrench fits perfectly. It is quick, it works perfectly and it does not mar the action. The 1/2" drive hole allows us to utilize a torque wrench for accurate seating of the action to the barrel. It is one of those "perfect" tools that no shop should be without.

Exquisite (21.11.2017)

Small, lightweight, innovative and precision forged, you can take off and install any right hand 700 barrel with ease using a big torque wrench. I routinely use it to remove and install barrels in conjunction with a Viper Barrel Vice. You can probably break if you try, but if a 180 ft-lbs won't loosen it, just use a heat gun to expand the action and soften up and boil out the old never-seize. Hard to believe, but no more heavy, clunky, boat anchor, stone age tools to do the simple job of tightening and loosening a rifle barrel. Five stars is not enough.

Les 8 flere anmeldelser fra brownells.com

0 0 1 NOK

Produktnr.: 100003675
SURGEON RIFLES SURGEON ACTION WRENCH
Produsentnr.: N/A Enkelt-i-bruk alternativ til gammeldagse T-håndtak nøkler, spesielt designet for å forhindre skade på mottakeren ved installasjon og fjerning av løp. Lar deg bruke dreiemoment på en Remington 700 eller Surgeon Rifles mottaker så nær løpstrådene som mulig for å eliminere uønsket vridning eller bøyning av mottakeren som kan føre til forvrengte boltrammer og annen kostbar skade. Settes inn i utkasterporten; de to "ørene" passer i løpsbanene ved forreste ring. Sett inn et ½" drevet skrallehåndtak eller momentnøkkel og stram/løsne mottakeren til løpet. Fungerer på mottakere av hvilken som helst lengde.

Varsle ved tilgjengelighet

Ikke tilgjengelig.

Spesifikasjoner: Make: Remington Modell: 700

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Enkelt-i-bruk alternativ til gammeldagse T-håndtak nøkler, designet for å forhindre skade på mottakeren ved installasjon og fjerning av løp.
Lar deg bruke dreiemoment på en Remington 700 eller Surgeon Rifles mottaker nær løpstrådene for å eliminere uønsket vridning eller bøyning.
Settes inn i utkasterporten og fungerer på mottakere av hvilken som helst lengde; bruk et ½" drevet skrallehåndtak eller momentnøkkel.

Attributes

Make: Remington Modell: 700 Leveringsvekt: 0,159kg Frakthøyde: 8mm Fraktbredde: 104mm Fraktlengde: 124mm

Elementdetaljer

Made in USA

Oppdag REMINGTON 700 ACTION WRENCH! 🛠️ Enkelt og effektivt verktøy for å installere og fjerne løp uten skade på mottakeren.

Prevents Damage When Installing Barrel On Surgeon Or Remington 700 Action

SPECS: Steel, black oxide finish. Fits Remington 700 and Surgeon Rifles receivers. Do not exceed 100 foot pounds torque.

Mer...

Forhindrer Skade Ved Montering Av Løp På Surgeon Eller Remington 700 Mottaker

SPECS: Stål, sort oksidfinish. Passer til Remington 700 og Surgeon Rifles mottakere. Ikke overskrid 100 fotpund dreiemoment.

Mer...

Kundevurderinger for SURGEON RIFLES SURGEON ACTION WRENCH

Antall vurderinger: 8
Fra brownells.com: 8
Gjennomsnittsvurdering: 4,5

you can use a tourque wrench (09.04.2010)

A must have (07.09.2010)

Engineered to perfection.This product made short work of a professional barrel installation.No fear of damaging a very expensive receiver .

small but strong (11.04.2012)

made for right handed rifles only,do not try to make work in a lefty,will ruin the receiver!

Excellent tool (02.06.2012)

Don't buy ONE, Buy TWO of them..... (29.03.2013)

Good for right hand rifles DOES NOT WORK (10.09.2013)

Was dissapointed it does not work on left hand models. I have been working on a lot of LEFT hand sniper rifles and this product does-not work on them :( so be ware It doese work well for righties

Great product (29.03.2017)