One kit so you can precisely tune the autos listed for smoothest double and/or single actions' pull and proper functioning.KIT #26520 COLT 1911 & COMMANDER - Contains 1 each 19 lb., 20 lb. and 21 lb. hammer springs. Factory spring is 23 lbs.
Mer...
3-i-1 Justeringsalternativer
Ett sett slik at du kan justere de oppførte automatene for den jevneste dobbelt- og/eller enkelthandlingsutløsningen og korrekt funksjonering. KIT #26520 COLT 1911 & COMMANDER - Inneholder 1 hver av 19 lb., 20 lb. og 21 lb. hammerfjærer. Fabrikkens fjær er 23 lbs.
Mer...
Kundevurderinger for WOLFF KIT #26520
Antall vurderinger: 5
Fra brownells.com: 5
Gjennomsnittsvurdering: 3,4
3 Springs in 1 Kit(22.10.2009)
3 springs for fine-tuning the 1911,just as advertised
Springs are too long(05.06.2011)
I bought this three pack for my new Springfield TRP. The springs are difficult to install because of their length and once they are installed will not allow the hammer to be cocked because the springs stacks and will not compress any more. I'm not sure if this Springfield hammer spring housing is different, but I doubt it. All three springs are the same length so I don't think Brownell's made a mistake. Bottom line is they are worthless unless you cut them down and I could have done that with the original spring. BTW the original spring is shorter.
"reduced power spring" don't think so!(05.12.2011)
was to replace the old 'reduced power' mainspring by Wilson combat i have--but unfortunately not going to work. first review was right.
Wolff Kit #26520(27.05.2012)
This worked great when I swapped out the ILS mainspring housing to a STD housing. Note. If you have a Springfield this kit will not work. You must change out the factory ILS housing to a more standard colt style. The internal parts are different due to the locking system.
Great product & value(22.11.2012)
All you need to tune action. Right on spec's! Just install each one 'til you get the trigger pull you want. Wollf is on my list of 1911 products!
Produktnr.: 969265200 WOLFF KIT #26520 Produsentnr.: 26520 Ett sett slik at du kan justere de oppførte automatene for den jevneste dobbelt- og/eller enkelthandlingsutløsningen og korrekt funksjonering. KIT #26520 COLT 1911 & COMMANDER - Inneholder 1 hver av 19 lb., 20 lb. og 21 lb. hammerfjærer. Fabrikkens fjær er 23 lbs.
369NOK9kr 369,00
*
Leveringstid ca. 14-21 dager. 9 stk. på lageret i USA
One kit so you can precisely tune the autos listed for smoothest double and/or single actions' pull and proper functioning.KIT #26520 COLT 1911 & COMMANDER - Contains 1 each 19 lb., 20 lb. and 21 lb. hammer springs. Factory spring is 23 lbs.
Mer...
3-i-1 Justeringsalternativer
Ett sett slik at du kan justere de oppførte automatene for den jevneste dobbelt- og/eller enkelthandlingsutløsningen og korrekt funksjonering. KIT #26520 COLT 1911 & COMMANDER - Inneholder 1 hver av 19 lb., 20 lb. og 21 lb. hammerfjærer. Fabrikkens fjær er 23 lbs.
Mer...
Kundevurderinger for WOLFF KIT #26520
Antall vurderinger: 5
Fra brownells.com: 5
Gjennomsnittsvurdering: 3,4
3 Springs in 1 Kit(22.10.2009)
3 springs for fine-tuning the 1911,just as advertised
Springs are too long(05.06.2011)
I bought this three pack for my new Springfield TRP. The springs are difficult to install because of their length and once they are installed will not allow the hammer to be cocked because the springs stacks and will not compress any more. I'm not sure if this Springfield hammer spring housing is different, but I doubt it. All three springs are the same length so I don't think Brownell's made a mistake. Bottom line is they are worthless unless you cut them down and I could have done that with the original spring. BTW the original spring is shorter.
"reduced power spring" don't think so!(05.12.2011)
was to replace the old 'reduced power' mainspring by Wilson combat i have--but unfortunately not going to work. first review was right.
Wolff Kit #26520(27.05.2012)
This worked great when I swapped out the ILS mainspring housing to a STD housing. Note. If you have a Springfield this kit will not work. You must change out the factory ILS housing to a more standard colt style. The internal parts are different due to the locking system.
Great product & value(22.11.2012)
All you need to tune action. Right on spec's! Just install each one 'til you get the trigger pull you want. Wollf is on my list of 1911 products!