Over 300 000 kunder - vi takker dere!

40 000+ produkter for jakt og skytesport

850041491035 430111398
R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
1399 1849 13 NOK
New
Produktnr.: 430111398
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 14X1 LH THREADS FACEMOUNT SHOULDER BLACK
Produsentnr.: 10115 850041491035
1449 NOK 0 kr 1 449,00 *
Varsle ved tilgjengelighet
Utsolgt. Ingen leveringsdato kjent.
Spesifikasjoner: Finish: Black Kaliber: 40 Caliber Material: Stainless Steel Threads: M14x1LH

Attributes

Finish: Black Gjenger: M14x1LH Kaliber: 40 Caliber Material: Stainless Steel Leveringsvekt: 0,227kg Frakthøyde: 152mm Fraktbredde: 32mm Fraktlengde: 102mm UPC : 850041491035

Elementdetaljer

Made in USA



New
Produktnr.: 430111401
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER M18X1.5 THREADS TAPER SHOULDER BLACK
Produsentnr.: 10124 850041491233
1799 NOK 1 kr 1 799,00 *
Leveringstid ca. 14-21 dager.
1 stk. på lageret i USA
Spesifikasjoner: Finish: Black Kaliber: 40 Caliber Material: Stainless Steel Threads: M18X1.5mm
New
Produktnr.: 430111402
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 15X1 RH THREADS TAPER SHOULDER BLACK
Produsentnr.: 10187 850041491868
1449 NOK 2 kr 1 449,00 *
Leveringstid ca. 14-21 dager.
2 stk. på lageret i USA
Spesifikasjoner: Finish: Black Kaliber: 40 Caliber Material: Stainless Steel Threads: M15x1
New
Produktnr.: 430111395
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 1/2-28 THREADS SQUARE SHOULDER BLACK
Produsentnr.: 10086 850035804858
1399 NOK 0 kr 1 399,00 *
Varsle ved tilgjengelighet
Utsolgt. Ingen leveringsdato kjent.
Spesifikasjoner: Finish: Black Kaliber: 40 Caliber Material: Stainless Steel Threads: 1/2-28
New
Produktnr.: 430111396
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 5/8-24 THREADS SQUARE SHOULDER BLACK
Produsentnr.: 10103 850035804919
1449 NOK 0 kr 1 449,00 *
Varsle ved tilgjengelighet
Utsolgt. Ingen leveringsdato kjent.
Spesifikasjoner: Finish: Black Kaliber: 40 Caliber Material: Stainless Steel Threads: 5/8-24
New
Produktnr.: 430111397
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 13.5X1 LH THREADS TAPER SHOULDER BLACK
Produsentnr.: 10109 850035804971
1449 NOK 0 kr 1 449,00 *
Varsle ved tilgjengelighet
Utsolgt. Ingen leveringsdato kjent.
Spesifikasjoner: Finish: Black Kaliber: 40 Caliber Material: Stainless Steel Threads: M13.5x1LH
New
Produktnr.: 430111399
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 1/2-28 THREADS TAPER SHOULDER BLACK
Produsentnr.: 10130 850041491295
1449 NOK 0 kr 1 449,00 *
Varsle ved tilgjengelighet
Utsolgt. Ingen leveringsdato kjent.
Spesifikasjoner: Finish: Black Kaliber: 40 Caliber Material: Stainless Steel Threads: 1/2-28
New
Produktnr.: 430111400
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 5/8-24 THREADS TAPER SHOULDER BLACK
Produsentnr.: 10131 850041491301
1449 NOK 0 kr 1 449,00 *
Varsle ved tilgjengelighet
Utsolgt. Ingen leveringsdato kjent.
Spesifikasjoner: Finish: Black Kaliber: 40 Caliber Material: Stainless Steel Threads: 5/8-24
New
Produktnr.: 430111407
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER SR25 THREADS FACEMOUNT SHOULDER BLACK
Produsentnr.: 10159 850041491585
1849 NOK 0 kr 1 849,00 *
Varsle ved tilgjengelighet
Utsolgt. Ingen leveringsdato kjent.
Spesifikasjoner: Finish: Black Kaliber: 40 Caliber Material: Stainless Steel Threads: SR25
New
Produktnr.: 430111403
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 1/2-36 THREADS SQUARE SHOULDER BLACK
Produsentnr.: 10189 850041491882
1449 NOK 0 kr 1 449,00 *
Varsle ved tilgjengelighet
Utsolgt. Ingen leveringsdato kjent.
Spesifikasjoner: Finish: Black Kaliber: 40 Caliber Material: Stainless Steel Threads: 1/2-36
New
Produktnr.: 430111404
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 13X1 LH THREADS FACEMOUNT SHOULDER BLACK
Produsentnr.: 10191 850041491905
1449 NOK 0 kr 1 449,00 *
Varsle ved tilgjengelighet
Utsolgt. Ingen leveringsdato kjent.
Spesifikasjoner: Finish: Black Kaliber: 40 Caliber Material: Stainless Steel Threads: M13x1LH
New
Produktnr.: 430111405
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 9/16X24 LH THREADS FACEMOUNT SHOULDER BLACK
Produsentnr.: 10193 850041491929
1449 NOK 0 kr 1 449,00 *
Varsle ved tilgjengelighet
Utsolgt. Ingen leveringsdato kjent.
Spesifikasjoner: Finish: Black Kaliber: 40 Caliber Material: Stainless Steel Threads: 9/16-24
New
Produktnr.: 430111406
REARDEN MANUFACTURING GROUP LLC R2S FLASH HIDER 13X1 RH THREADS FACEMOUNT SHOULDER BLACK
Produsentnr.: 10195 850041491943
1449 NOK 0 kr 1 449,00 *
Varsle ved tilgjengelighet
Utsolgt. Ingen leveringsdato kjent.
Spesifikasjoner: Finish: Black Kaliber: 40 Caliber Material: Stainless Steel Threads: M13x1RH
R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
Tilbake til toppen