Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

MANSON PRECISION
PRECISION REAMERS MUZZLE CROWN REFACING KIT

513000038

No Lathe Way To Cut A Perfect Crown In Minutes & Improve Accuracy

Hand driver with spring-loaded adapter provides a fast, no lathe way to cut a smooth, concentric muzzle crown on both rifle and handgun barrels for an immediate improvement in accuracy. Expandable pilots provide precise alignment of the facing cutter with the bore. Includes two facing cutters for 0° or 11° crowns, each with precision ground three-blade inserts that quickly and easily remove the toughest material and provide a perfectly square barrel crown. Outside chamfer cutter deburrs the sharp edges for a clean, even finish. Kits include 0° facing cutter, 11° facing cutter, outside chamfer cutter, and two or five pilots depending on kit, plus a 1/8" pilot wrench, 5/64" allen wrench, setup gauge, power driver or manual handle, adapter, instructions, and storage case. Manual version includes a manual handle and adapter for slow even cuts and precise indexing of muzzle brakes. 2-Pilot Kit contains .22 and .30 caliber pilots. 5-Pilot Kit contains .22, .30, 6mm, 7mm, and .338 caliber pilots.

SPECS: Facing Cutters - Steel, carbide inserts. Chamfer Cutter – Steel. 1.25” (32mm) diameter. Pilots - Steel, 8¾” (22.2cm) overall length. Kits include manual handle, 0° facing cutter,11° facing cutter, outside chamfer cutter, (2 or 5) pilots, 1⁄8" pilot wrench, 5⁄64" allen wrench, setup gauge, power driver, adapter, instructions, and storage case. 2-Pilot Kit - .22 and .30 caliber pilots. 5-Pilot Kit - .22, .30, 6mm, 7mm, and .338 caliber pilots.

Mer...

Dreiebenkfri Måte Å Kutte En Perfekt Krone På Minutter & Forbedre Nøyaktigheten

Hånddriver med fjærbelastet adapter gir en rask, dreiebenkfri måte å kutte en glatt, konsentrisk munningkrone på både rifle- og håndvåpenløp for umiddelbar forbedring av nøyaktigheten. Utvidbare piloter sikrer nøyaktig justering av fasingskutteren med løpet. Inkluderer to fasingskuttere for 0° eller 11° kroner, hver med presisjonsslipte trebladsinnlegg som raskt og enkelt fjerner det tøffeste materialet og gir en perfekt kvadratisk munningkrone. Utvendig avfasingskutter fjerner skarpe kanter for en ren, jevn finish. Settene inkluderer 0° fasingskutter, 11° fasingskutter, utvendig avfasingskutter og to eller fem piloter avhengig av settet, pluss en 1/8" pilotnøkkel, 5/64" unbrakonøkkel, oppsettsgauge, kraftdriver eller manuelt håndtak, adapter, instruksjoner og oppbevaringskasse. Manuell versjon inkluderer et manuelt håndtak og adapter for sakte, jevne kutt og presis indeksering av munningbrems. 2-Pilot Sett inneholder .22 og .30 kaliber piloter. 5-Pilot Sett inneholder .22, .30, 6mm, 7mm og .338 kaliber piloter.

SPECS: Fasingskuttere - Stål, karbidinnlegg. Avfasingskutter – Stål. 1.25” (32mm) diameter. Piloter - Stål, 8¾” (22.2cm) totallengde. Settene inkluderer manuelt håndtak, 0° fasingskutter, 11° fasingskutter, utvendig avfasingskutter, (2 eller 5) piloter, 1⁄8" pilotnøkkel, 5⁄64" unbrakonøkkel, oppsettsgauge, kraftdriver, adapter, instruksjoner og oppbevaringskasse. 2-Pilot Sett - .22 og .30 kaliber piloter. 5-Pilot Sett - .22, .30, 6mm, 7mm og .338 kaliber piloter.

Mer...

Kundevurderinger for MANSON PRECISION 2 PILOT MANUAL CROWN KIT

Antall vurderinger: 12
Fra brownells.com: 12
Gjennomsnittsvurdering: 4,6

This is an amazing tool! (16.02.2010)

I have been putting off recrowning an old Remington 35 for over a year now. I always have my lathe tied up on other projects, and the receiver would just barley clear the thru boar on the spindle. Well I had my doubts at first abut this tool, but I am simply amazed. I recrowned that old Remington in 10 minutes and it looks perfect. Manson got their cutter geometry just right so only slight downward pressure is needed to make a perfect, no chatter finish! The outside deburring tool also worked great! This tool will pay for itself in just a few jobs, and it will last forever!

Recrowning with the Manson Tool (18.02.2011)

Around these parts I am know as the crown nazi, a term taken from the Seinfeld character the soup nazi. Anyway, I never believed in manual crowning methods because I didn't like the idea of a revolving pilot running in the bore. If I couldn't swing the barrel in the lathe then it wasn't for me. A friend recommended the Manson tool and so I invested in it thinking it would save time while at the range restoring crowns. I like Dave's crowning tool. I like the fact that the pilot is held in place by an expandable arbor while the cutter rotates around it, providing a clean, crip crown.

I prefer the lathe as that provides the very best results, however, the Manson Crowning Tool goes with me everywhere!

Excellent Tool (09.08.2013)

Since I received this I have done 3 10/22 crown jobs and the results were perfect. This is a very easy gizmo to use, dare I say foolproof. A quick touch-up with Brownell's Oxpho-Blue and I would dare to suspect my 10/22 has a better than factory muzzle now.

What a time saver !!!!!!!!! WOW ! (14.05.2014)

I use to use my south bend lathe and a 4 jaw chuck. and had to take the gun apart to do it. charged 1 hour labor and always took me two. With this it is done in 5 minuets!! WORTH the money !! Will be buying more adapters asap to do more.

Neat Idea, but I'd rather use a lathe (22.04.2015)

While it IS versatile when buying the whole set, be very carefull not to do anything wrong, because all the mandrills have to fit into the same cuttinghead.

I've been extra carefull to clean, and lightly lubricate inside the cuttinghead - but something messed up, and now I cant us ANY of the two cuttingheads, even with shafts/brushes that I haven't previously used.

Make one mistake, and that cuttinghead, and likely the shaft/brush is ruined forever.

If the shaft fastens even a little in the cuttinghead, the shaft/brush will either tighten or loosen - loose enough to not keep the tool in the right angle, or tight enough for the expanding part to lock up inside the gun, making it difficult to remove.

Right now, after 3 uses, it's just he most expencive non-functioning tool on the shelf - collecting dust.

Best crowning tool (23.01.2016)

Does the job done

Worth the money (28.01.2012)

I bought a cheaper crowning tool to reface and crown .223 barrels. After barrel #8, the pilot tube broke off the face of the cutting tool. Rather than spend another $90.00 to replace a tool that already failed, I bought the Manson Precision refacing kit. I first watched a demo of the tool on You Tube. When I used it the first time, it worked exactly as demonstrated. Made smooth cuts with no chatter marks. The pilot bushing fits well inside the barrel. The brush on the end helps remove chips from the barrel as the bushing is pulled from the barrel. The hand crank and guide work very well to provide steady and even downward pressure to the cutting blades. It cost more but the quality and ability to do .22 and .30 calibers made it worth the money for me. If you plan on refacing many barrels this is the professional grade tool to use.

Corinthian Arms, LLC (16.12.2012)

You get what you pay for. This is a well-made tool that is very easy to use. The resulting crown is clean and sharp looking.

The perfect solution to recrown a barrel (19.05.2013)

I just purchased this kit a couple weeks ago, all i can say is Wow, this recrowning kit is simple to use and does an amazing job! I have been playing with a couple .22 rimfires and they went from ok to tack drivers after recrowning the barrels,one of the best purchases I've made.

Excellent kit! (22.09.2013)

So far I've used this kit to cut and re-crown three rifles, all with excellent results.

I just got done cutting an inch off of my .308 Rem 700 varmint, and at the range today I shot a five shot group of .309. Even with the bedded stock and carefully hand loaded ammo, this wasn't possible before the cut/re-crown. I've also cut and re-crowned several Mosin Nagants which dramatically improves the accuracy of these rifles. I can hold under one MOA in the last Mosin I worked on. Previously, I thought you needed a high-end lathe and heaps of experience to achieve this. Not.

Excellent kit for the money (11.01.2014)

Used the first time today to recrown a Mosin Nagant that I believe saw action due to the muzzle being so beat up. The set is very easy to use, remember to use cutting oil (as it states in the instructions) and it makes crowning a muzzle really easy.

Manson Precision Crowning Kit (18.05.2015)

As a law enforcement armorer I needed/wanted to cut down four (4) precision rifle barrels to 18". The cost of the two (2) arbor kit was close to the cost of having the work done. Once the kit arrived it was very easy to setup and use and it did a very fine job. Best of all a guy can hacksaw cut a precision rifle barrel and finish off the cut with this tool. A straight cut of course makes the finish job much faster.

I have owned this kit for three years plus now and have cut down at least 20 barrels and have loaned it out to other agency's. It still cuts as well as it did on day one. The average time from start of cut to finish is about 30 minutes....taking your time.

This is a very high quality tool and does a professional crowning job with ease. While the initial cost seems high it is well worth the cost and can pay for itself many times over.

Les 12 flere anmeldelser fra brownells.com

9999 12299 2 NOK

Produktnr.: 513000038
MANSON PRECISION 2 PILOT MANUAL CROWN KIT
Produsentnr.: NONE Hånddriver med fjærbelastet adapter gir en rask, dreiebenkfri måte å kutte en glatt, konsentrisk munningkrone på både rifle- og håndvåpenløp for umiddelbar forbedring av nøyaktigheten. Utvidbare piloter sikrer nøyaktig justering av fasingskutteren med løpet. Inkluderer to fasingskuttere for 0° eller 11° kroner, hver med presisjonsslipte trebladsinnlegg som raskt og enkelt fjerner det tøffeste materialet og gir en perfekt kvadratisk munningkrone. Utvendig avfasingskutter fjerner skarpe kanter for en ren, jevn finish. Settene inkluderer 0° fasingskutter, 11° fasingskutter, utvendig avfasingskutter og to eller fem piloter avhengig av settet, pluss en 1/8" pilotnøkkel, 5/64" unbrakonøkkel, oppsettsgauge, kraftdriver eller manuelt håndtak, adapter, instruksjoner og oppbevaringskasse. Manuell versjon inkluderer et manuelt håndtak og adapter for sakte, jevne kutt og presis indeksering av munningbrems. 2-Pilot Sett inneholder .22 og .30 kaliber piloter. 5-Pilot Sett inneholder .22, .30, 6mm, 7mm og .338 kaliber piloter.

9999 NOK 5 kr 9 999,00 *

Leveringstid ca. 14-21 dager.
5 stk. på lageret i USA

Spesifikasjoner: Degree: 11 Kaliber: 22 Caliber (.223-.224), 30 Caliber (.308) Material: Steel

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Hånddriver med fjærbelastet adapter gir en rask, dreiebenkfri måte å kutte en glatt, konsentrisk munningkrone på rifle- og håndvåpenløp.
Settene inkluderer 0° og 11° fasingskuttere, utvendig avfasingskutter, piloter, nøkler, oppsettsgauge, kraftdriver eller manuelt håndtak, adapter, instruksjoner og oppbevaringskasse.
2-Pilot Sett inneholder .22 og .30 kaliber piloter, mens 5-Pilot Sett inneholder .22, .30, 6mm, 7mm og .338 kaliber piloter.

Attributes

Degree: 11 Kaliber: 22 Caliber (.223-.224),30 Caliber (.308) Material: Steel Leveringsvekt: 1,066kg Frakthøyde: 71mm Fraktbredde: 244mm Fraktlengde: 338mm

Elementdetaljer

Made in USA

Produktnr.: 513000039
MANSON PRECISION 5 PILOT MANUAL CROWN KIT
Produsentnr.: NONE Hånddriver med fjærbelastet adapter gir en rask, dreiebenkfri måte å kutte en glatt, konsentrisk munningkrone på både rifle- og håndvåpenløp for umiddelbar forbedring av nøyaktigheten. Utvidbare piloter sikrer nøyaktig justering av fasingskutteren med løpet. Inkluderer to fasingskuttere for 0° eller 11° kroner, hver med presisjonsslipte trebladsinnlegg som raskt og enkelt fjerner det tøffeste materialet og gir en perfekt kvadratisk munningkrone. Utvendig avfasingskutter fjerner skarpe kanter for en ren, jevn finish. Settene inkluderer 0° fasingskutter, 11° fasingskutter, utvendig avfasingskutter og to eller fem piloter avhengig av settet, pluss en 1/8" pilotnøkkel, 5/64" unbrakonøkkel, oppsettsgauge, kraftdriver eller manuelt håndtak, adapter, instruksjoner og oppbevaringskasse. Manuell versjon inkluderer et manuelt håndtak og adapter for sakte, jevne kutt og presis indeksering av munningbrems. 2-Pilot Sett inneholder .22 og .30 kaliber piloter. 5-Pilot Sett inneholder .22, .30, 6mm, 7mm og .338 kaliber piloter.

12299 NOK 1 kr 12 299,00 *

Leveringstid ca. 14-21 dager.
1 stk. på lageret i USA

Spesifikasjoner: Degree: 11 Kaliber: 22 Caliber (.223-.224), 243/6 mm (.243), 284/7 mm (.284), 30 Caliber (.308), 338 Caliber (.338) Material: Steel

Legg til ønskeliste

Still spørsmål