Durable Forend With Outstanding Grip Characteristics; Rubber-Coated Finish Grips Great, With or Without Gloves
Fiberglass-reinforced, polymer, shotgun stock provides synthetic-stock durability and is overmolded with rubber for a sure grip every time you grab your gun. Rubber is pebble-textured in the gripping areas.
Holdbar forskjefte med utmerkede grepsegenskaper; Gummibelagt finish gir godt grep, med eller uten hansker
Fiberglass-forsterket, polymer, haglegeværskjefte gir holdbarheten til et syntetisk skjefte og er overmoldet med gummi for et sikkert grep hver gang du tar tak i våpenet ditt. Gummi er småkornet teksturert i grepområdene.
SPECS: Polymerskjefte; gummi overmoldet, svart, matt finish.
Mer...
Kundevurderinger for HOGUE REM. 870 FOREND ONLY, 12 GA.
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 5
Good replacement for factory forend(06.02.2012)
I was disapponted with the factory installed Tri-rail forend. My hand kept slipping and I could not get a good grip. Ordered this forend and I am very happy with it. Installation was easy and required no swearing. I din't have tube wrench and brownells was out of the one I wanted so I used one of the shell stop bars to loosen the nut. Fit perfect, and then used a rubber mallet to break the factory forend free. Slid it off, put the hogue on and tightened the nut. Looks great, solid non slip grip. Should have bought a long time ago.
Works for 590A1 as well.(31.01.2013)
The grip on this forend is soft enough to get a better grip than the stock forend and still hard enough that it feels like it will last for a while. When you take it out of the box, look at it from the rear and you will see 3 raised portions on the inside that extend further back than the stock forend from a 590A1. After grinding these to the same length as the 590A1 stock forend it fit perfectly.
Most Comfortable(28.01.2010)
I really like this forend grip
Hogue is the stuff!(03.07.2011)
Bought for a 870 project gun. Quality is fantastic. The pebbled tecture and consistancy of the rubber used on hogue products is perfect for a shotgun forearm.
Matches MESA Tactical Stock(04.08.2011)
Matches perfectly with MESA Tactical Stock conversion kit. Feels Great.
Positive grip(27.05.2012)
Very nice addition to my 870. Cant see any fualts with it.
Great with 6 rd shell carrier(10.08.2015)
Fit & finish were perfect. Installation was uncomplicated (Brownells forend wrench recommended). Function was flawless. Excellent value. This is a great choice for use with the Mesa 6 rd sidesaddle shell carrier--no modification needed. To add the Nordic Components clamp for attaching a light (via short rail) or QDA point, I needed to also replace the stock mag ext tube with one from Nordic as well. The clamp would not grasp the stock mag ext tube. Hope this helps.
Produktnr.: 408000066 HOGUE REM. 870 FOREND ONLY, 12 GA. Produsentnr.: 08701743108087015 Fiberglass-forsterket, polymer, haglegeværskjefte gir holdbarheten til et syntetisk skjefte og er overmoldet med gummi for et sikkert grep hver gang du tar tak i våpenet ditt. Gummi er småkornet teksturert i grepområdene.
649NOK4kr 649,00
*
Leveringstid ca. 14-21 dager. 4 stk. på lageret i USA
Produktnr.: 408000067 HOGUE MOSS. 500 FOREND ONLY, 12 GA. Produsentnr.: 05001743108050019 Fiberglass-forsterket, polymer, haglegeværskjefte gir holdbarheten til et syntetisk skjefte og er overmoldet med gummi for et sikkert grep hver gang du tar tak i våpenet ditt. Gummi er småkornet teksturert i grepområdene.
599NOK3kr 599,00
*
Leveringstid ca. 14-21 dager. 3 stk. på lageret i USA
Durable Forend With Outstanding Grip Characteristics; Rubber-Coated Finish Grips Great, With or Without Gloves
Fiberglass-reinforced, polymer, shotgun stock provides synthetic-stock durability and is overmolded with rubber for a sure grip every time you grab your gun. Rubber is pebble-textured in the gripping areas.
Holdbar forskjefte med utmerkede grepsegenskaper; Gummibelagt finish gir godt grep, med eller uten hansker
Fiberglass-forsterket, polymer, haglegeværskjefte gir holdbarheten til et syntetisk skjefte og er overmoldet med gummi for et sikkert grep hver gang du tar tak i våpenet ditt. Gummi er småkornet teksturert i grepområdene.
SPECS: Polymerskjefte; gummi overmoldet, svart, matt finish.
Mer...
Kundevurderinger for HOGUE REM. 870 FOREND ONLY, 12 GA.
Antall vurderinger: 7
Fra brownells.com: 7
Gjennomsnittsvurdering: 5
Good replacement for factory forend(06.02.2012)
I was disapponted with the factory installed Tri-rail forend. My hand kept slipping and I could not get a good grip. Ordered this forend and I am very happy with it. Installation was easy and required no swearing. I din't have tube wrench and brownells was out of the one I wanted so I used one of the shell stop bars to loosen the nut. Fit perfect, and then used a rubber mallet to break the factory forend free. Slid it off, put the hogue on and tightened the nut. Looks great, solid non slip grip. Should have bought a long time ago.
Works for 590A1 as well.(31.01.2013)
The grip on this forend is soft enough to get a better grip than the stock forend and still hard enough that it feels like it will last for a while. When you take it out of the box, look at it from the rear and you will see 3 raised portions on the inside that extend further back than the stock forend from a 590A1. After grinding these to the same length as the 590A1 stock forend it fit perfectly.
Most Comfortable(28.01.2010)
I really like this forend grip
Hogue is the stuff!(03.07.2011)
Bought for a 870 project gun. Quality is fantastic. The pebbled tecture and consistancy of the rubber used on hogue products is perfect for a shotgun forearm.
Matches MESA Tactical Stock(04.08.2011)
Matches perfectly with MESA Tactical Stock conversion kit. Feels Great.
Positive grip(27.05.2012)
Very nice addition to my 870. Cant see any fualts with it.
Great with 6 rd shell carrier(10.08.2015)
Fit & finish were perfect. Installation was uncomplicated (Brownells forend wrench recommended). Function was flawless. Excellent value. This is a great choice for use with the Mesa 6 rd sidesaddle shell carrier--no modification needed. To add the Nordic Components clamp for attaching a light (via short rail) or QDA point, I needed to also replace the stock mag ext tube with one from Nordic as well. The clamp would not grasp the stock mag ext tube. Hope this helps.