Incredibly hard, industrial diamond, powder impregnated surface requires very little travel to quickly cut even the hardest materials - carbide, steel, glass or ceramics.
SPECS: Available in either Coarse or Fine grit. Files are 5.5" (14cm) long. Carbon steel shanks are .118" (3mm) dia.
Mer...
Diamantimpregnerte, nålfiler
Utrolig hard overflate impregnert med industriell diamantpulver krever svært lite bevegelse for å raskt kutte selv de hardeste materialene - karbid, stål, glass eller keramikk.
SPECS: Tilgjengelig i enten grov eller fin kornstørrelse. Filene er 5,5" (14 cm) lange. Karbonstålskaftene er .118" (3 mm) i diameter.
Mer...
Kundevurderinger for EZE-LAP DIAMOND EZE-LAP 600 SET, FINE
Antall vurderinger: 4
Fra brownells.com: 4
Gjennomsnittsvurdering: 3
Not Durable(27.04.2010)
The diamond coating only lasted a few jobs. It is definitely not a durable tool. It might be OK for a hobbyist, but not for professional gunsmithing.
FRANKLY, NOT WORTH 2 CENTS TO A GUNSMITH(17.05.2011)
THESE FILES LASTED MAYBE TWO FITTINGS. ONE OF AN EXTRACTOR ON A SEMI-AUTO AND AN OVERSIZED HAND ON A S&W. I AM SURPRISED THAT BROWNELL'S WOULD EVEN OFFER SUCH AN INFERIOR ITEM TO THEIR CUSTOMERS.
works for me!(20.08.2014)
miscellaneous workshop use
Great set(08.09.2015)
I run a professional gunsmithing/custom gun building shop and I have had this set of files for almost 7 years now. Yes, the outer coating does rub off quickly but the files still work for fine work. I think other reviewers have run into trouble trying to use these files where you actually need to remove a lot of material like when fitting parts - use Swiss needle files for that type of work. I have used these for polishing for the better part of a decade and they are still going strong.
Produktnr.: 290600100 EZE-LAP DIAMOND EZE-LAP 600 SET, FINE Produsentnr.: 600F081810960012 Utrolig hard overflate impregnert med industriell diamantpulver krever svært lite bevegelse for å raskt kutte selv de hardeste materialene - karbid, stål, glass eller keramikk.
849NOK6kr 849,00
*
Leveringstid ca. 14-21 dager. 6 stk. på lageret i USA
Produktnr.: 290600105 EZE-LAP DIAMOND NEEDLE FILE, FINE, FLAT WARD Produsentnr.: 605F081819060515 Utrolig hard overflate impregnert med industriell diamantpulver krever svært lite bevegelse for å raskt kutte selv de hardeste materialene - karbid, stål, glass eller keramikk.
239NOK18kr 239,00
*
Leveringstid ca. 14-21 dager. Mer enn 10 stk. på lager i USA
Produktnr.: 290600200 EZE-LAP DIAMOND EZE-LAP 600 SET, COURSE Produsentnr.: 600C081819060027 Utrolig hard overflate impregnert med industriell diamantpulver krever svært lite bevegelse for å raskt kutte selv de hardeste materialene - karbid, stål, glass eller keramikk.
849NOK0kr 849,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Incredibly hard, industrial diamond, powder impregnated surface requires very little travel to quickly cut even the hardest materials - carbide, steel, glass or ceramics.
SPECS: Available in either Coarse or Fine grit. Files are 5.5" (14cm) long. Carbon steel shanks are .118" (3mm) dia.
Mer...
Diamantimpregnerte, nålfiler
Utrolig hard overflate impregnert med industriell diamantpulver krever svært lite bevegelse for å raskt kutte selv de hardeste materialene - karbid, stål, glass eller keramikk.
SPECS: Tilgjengelig i enten grov eller fin kornstørrelse. Filene er 5,5" (14 cm) lange. Karbonstålskaftene er .118" (3 mm) i diameter.
Mer...
Kundevurderinger for EZE-LAP DIAMOND EZE-LAP 600 SET, FINE
Antall vurderinger: 4
Fra brownells.com: 4
Gjennomsnittsvurdering: 3
Not Durable(27.04.2010)
The diamond coating only lasted a few jobs. It is definitely not a durable tool. It might be OK for a hobbyist, but not for professional gunsmithing.
FRANKLY, NOT WORTH 2 CENTS TO A GUNSMITH(17.05.2011)
THESE FILES LASTED MAYBE TWO FITTINGS. ONE OF AN EXTRACTOR ON A SEMI-AUTO AND AN OVERSIZED HAND ON A S&W. I AM SURPRISED THAT BROWNELL'S WOULD EVEN OFFER SUCH AN INFERIOR ITEM TO THEIR CUSTOMERS.
works for me!(20.08.2014)
miscellaneous workshop use
Great set(08.09.2015)
I run a professional gunsmithing/custom gun building shop and I have had this set of files for almost 7 years now. Yes, the outer coating does rub off quickly but the files still work for fine work. I think other reviewers have run into trouble trying to use these files where you actually need to remove a lot of material like when fitting parts - use Swiss needle files for that type of work. I have used these for polishing for the better part of a decade and they are still going strong.