Solid & Lightweight For Mounting Scopes & Other Optics
Weaver-style scope mounting rail matches the top contour on all Mossberg 500/590 and 835 models for a durable, no-gap installation. Held by four, 8-40 tpi machine screws that stand up to recoil without deformation or stripping. Machined from lightweight, extruded aluminum, and anodized to match the anodized or black painted Mossberg receivers. Accepts all Weaver-style scope mounts and accessories.
SPECS: Aluminum, black, anodized finish. 5” (12.7cm) long. 2 oz. (56.6g) wt. Includes (4), 8-40 tpi mounting screws. Installation requires drilling and tapping on early model Mossberg 500.
Mer...
Solid & Lettvektig for Montering av Sikter & Annen Optikk
Weaver-stil sikteskinne matcher den øvre konturen på alle Mossberg 500/590 og 835 modeller for en holdbar, uten glippe installasjon. Holdes på plass av fire, 8-40 tpi maskinskruer som tåler rekyl uten deformasjon eller strippet gjenger. Frest fra lett, ekstrudert aluminium, og anodisert for å matche de anodiserte eller svartmalte Mossberg-mottakerne. Aksepterer alle Weaver-stil siktemonteringer og tilbehør.
SPECS: Aluminium, svart, anodisert finish. 5” (12.7cm) lang. 2 oz. (56.6g) vekt. Inkluderer (4), 8-40 tpi monteringsskruer. Installasjon krever boring og gjenging på tidlige modeller av Mossberg 500.
Mer...
Kundevurderinger for HAVLIN MOSSBERG SCOPE RAIL
Antall vurderinger: 2
Fra brownells.com: 2
Gjennomsnittsvurdering: 5
Rail great - Mossberg receiver marginal(24.06.2010)
- I used this rail to mount a 1-4 scope on a Mossberg 535 receiver using the pre-drilled & tapped holes. The fit and finish of the rail couldn't be better. - However, a caution. The rail to receiver screws are going to require some serious 'Loctite'. After 7 3" rifled slugs, the impact point started to shift greatly. At 10, none were on the paper. - All four rail mounting screws (that had been carefully torqued to 15 in lbs) had shot loose from the aluminum alloy receiver.
Lives Up to the Manufactuer's Promise!!(03.09.2010)
Great Accessory, especially for the price!! I bought & recieved this product, pronto!! No complaints so far. I installed the rail right when I got it and it was a quick, easy install (**need benchrest or something to rest gun on**, makes it easier).
I threw a BSA red-dot scope on my Tactical Mossberg 500 and put 50 rounds thru shotgun without any problems, then put an EOTECH sight on it and put another 50 rounds downrange. HOLY, MOLY!!! No problems yet to date.
Just screw the screws in tight, I didn't need Loc-Tite and your good to go. Its a must buy, you will not be let down. I PROMISE!!!
Produktnr.: 100002901 HAVLIN MOSSBERG SCOPE RAIL Produsentnr.: M500R8 Weaver-stil sikteskinne matcher den øvre konturen på alle Mossberg 500/590 og 835 modeller for en holdbar, uten glippe installasjon. Holdes på plass av fire, 8-40 tpi maskinskruer som tåler rekyl uten deformasjon eller strippet gjenger. Frest fra lett, ekstrudert aluminium, og anodisert for å matche de anodiserte eller svartmalte Mossberg-mottakerne. Aksepterer alle Weaver-stil siktemonteringer og tilbehør.
649NOK5kr 649,00
*
Leveringstid ca. 14-21 dager. 5 stk. på lageret i USA
Solid & Lightweight For Mounting Scopes & Other Optics
Weaver-style scope mounting rail matches the top contour on all Mossberg 500/590 and 835 models for a durable, no-gap installation. Held by four, 8-40 tpi machine screws that stand up to recoil without deformation or stripping. Machined from lightweight, extruded aluminum, and anodized to match the anodized or black painted Mossberg receivers. Accepts all Weaver-style scope mounts and accessories.
SPECS: Aluminum, black, anodized finish. 5” (12.7cm) long. 2 oz. (56.6g) wt. Includes (4), 8-40 tpi mounting screws. Installation requires drilling and tapping on early model Mossberg 500.
Mer...
Solid & Lettvektig for Montering av Sikter & Annen Optikk
Weaver-stil sikteskinne matcher den øvre konturen på alle Mossberg 500/590 og 835 modeller for en holdbar, uten glippe installasjon. Holdes på plass av fire, 8-40 tpi maskinskruer som tåler rekyl uten deformasjon eller strippet gjenger. Frest fra lett, ekstrudert aluminium, og anodisert for å matche de anodiserte eller svartmalte Mossberg-mottakerne. Aksepterer alle Weaver-stil siktemonteringer og tilbehør.
SPECS: Aluminium, svart, anodisert finish. 5” (12.7cm) lang. 2 oz. (56.6g) vekt. Inkluderer (4), 8-40 tpi monteringsskruer. Installasjon krever boring og gjenging på tidlige modeller av Mossberg 500.
Mer...
Kundevurderinger for HAVLIN MOSSBERG SCOPE RAIL
Antall vurderinger: 2
Fra brownells.com: 2
Gjennomsnittsvurdering: 5
Rail great - Mossberg receiver marginal(24.06.2010)
- I used this rail to mount a 1-4 scope on a Mossberg 535 receiver using the pre-drilled & tapped holes. The fit and finish of the rail couldn't be better. - However, a caution. The rail to receiver screws are going to require some serious 'Loctite'. After 7 3" rifled slugs, the impact point started to shift greatly. At 10, none were on the paper. - All four rail mounting screws (that had been carefully torqued to 15 in lbs) had shot loose from the aluminum alloy receiver.
Lives Up to the Manufactuer's Promise!!(03.09.2010)
Great Accessory, especially for the price!! I bought & recieved this product, pronto!! No complaints so far. I installed the rail right when I got it and it was a quick, easy install (**need benchrest or something to rest gun on**, makes it easier).
I threw a BSA red-dot scope on my Tactical Mossberg 500 and put 50 rounds thru shotgun without any problems, then put an EOTECH sight on it and put another 50 rounds downrange. HOLY, MOLY!!! No problems yet to date.
Just screw the screws in tight, I didn't need Loc-Tite and your good to go. Its a must buy, you will not be let down. I PROMISE!!!