Optimized for semi-automatic rifles, the second generation JP Semi-Auto Case Gauge guaranties function of your ammo. If it fits our gauge, it will fit even a minimum-depth SAAMI chamber without interference. Features: Specially calibrated to ensure function in semi-auto rifles Guaranties ammo fit in a minimum-spec SAAMI chamber 416 stainless steel construction for wear resistance and greater longevity
Mer...
Hjelper med å forhindre ammunisjonsrelaterte funksjonsfeil
Optimalisert for halvautomatiske rifler, garanterer den andre generasjonen JP Semi-Auto Case Gauge funksjonen til ammunisjonen din. Hvis den passer i vår måler, vil den passe i en minimumsdybde SAAMI-kammer uten forstyrrelser. Funksjoner: Spesielt kalibrert for å sikre funksjon i halvautomatiske rifler Garanterer at ammunisjon passer i et minimums-spesifikasjon SAAMI-kammer Konstruksjon i 416 rustfritt stål for slitasjemotstand og lengre levetid
Mer...
Kundevurderinger for J P ENTERPRISES .223/5.56 WYLDE CASE GAUGE
Antall vurderinger: 3
Fra brownells.com: 3
Gjennomsnittsvurdering: 3,7
Great Gauge(05.06.2014)
I have the LE Wilson gauge and a JP SuperMatch Barrel. Since I have the JP Barrel I decided to pickup the JP Gauge and found some of the cases that fit the Wilson gauge didn't fit the JP gauge. I believe the JP gauge is supposed to be a better match for the JP chamber so that is the one I go by. I only wish it was made from stainless steel instead of aluminum. I have other JP accessories and they are top notch.
Doesn"t Work!(10.06.2013)
Reloaded rounds went in the gauge nice and easy and came out just as easy, therefore I "assumed" good to go. The rounds wouldn"t chamber properly in my rifle bolt would not close! Upon further review there was a slight bulge (.03)in the case (need t check press) but I feel the gauge was of no value it didn't give me any assurance of good round. In my opinion....JUNK!
most accurate 223/556 gage(12.03.2017)
This is the tightest tolerance gage (yes, this spelling is the correct usage for the tool as a noun) out there for 223/5.56.
Defective cases that passed a Dillon 223 gage did not pass the JP gage. It saved me a lot of frustration if I were to start batch reloading based on faulty results.
Produktnr.: 452000102 J P ENTERPRISES .223/5.56 WYLDE CASE GAUGE Produsentnr.: JPCG-223812872022642 Optimalisert for halvautomatiske rifler, garanterer den andre generasjonen JP Semi-Auto Case Gauge funksjonen til ammunisjonen din. Hvis den passer i vår måler, vil den passe i en minimumsdybde SAAMI-kammer uten forstyrrelser. Funksjoner: Spesielt kalibrert for å sikre funksjon i halvautomatiske rifler Garanterer at ammunisjon passer i et minimums-spesifikasjon SAAMI-kammer Konstruksjon i 416 rustfritt stål for slitasjemotstand og lengre levetid
749NOK0kr 749,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Produktnr.: 452000103 J P ENTERPRISES .308/7.62 CASE GAUGE Produsentnr.: JPCG-308812872022659 Optimalisert for halvautomatiske rifler, garanterer den andre generasjonen JP Semi-Auto Case Gauge funksjonen til ammunisjonen din. Hvis den passer i vår måler, vil den passe i en minimumsdybde SAAMI-kammer uten forstyrrelser. Funksjoner: Spesielt kalibrert for å sikre funksjon i halvautomatiske rifler Garanterer at ammunisjon passer i et minimums-spesifikasjon SAAMI-kammer Konstruksjon i 416 rustfritt stål for slitasjemotstand og lengre levetid
749NOK0kr 749,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Spesifikasjoner:Kaliber: 308 Winchester, 7.62 mm NATO
Optimized for semi-automatic rifles, the second generation JP Semi-Auto Case Gauge guaranties function of your ammo. If it fits our gauge, it will fit even a minimum-depth SAAMI chamber without interference. Features: Specially calibrated to ensure function in semi-auto rifles Guaranties ammo fit in a minimum-spec SAAMI chamber 416 stainless steel construction for wear resistance and greater longevity
Mer...
Hjelper med å forhindre ammunisjonsrelaterte funksjonsfeil
Optimalisert for halvautomatiske rifler, garanterer den andre generasjonen JP Semi-Auto Case Gauge funksjonen til ammunisjonen din. Hvis den passer i vår måler, vil den passe i en minimumsdybde SAAMI-kammer uten forstyrrelser. Funksjoner: Spesielt kalibrert for å sikre funksjon i halvautomatiske rifler Garanterer at ammunisjon passer i et minimums-spesifikasjon SAAMI-kammer Konstruksjon i 416 rustfritt stål for slitasjemotstand og lengre levetid
Mer...
Kundevurderinger for J P ENTERPRISES .223/5.56 WYLDE CASE GAUGE
Antall vurderinger: 3
Fra brownells.com: 3
Gjennomsnittsvurdering: 3,7
Great Gauge(05.06.2014)
I have the LE Wilson gauge and a JP SuperMatch Barrel. Since I have the JP Barrel I decided to pickup the JP Gauge and found some of the cases that fit the Wilson gauge didn't fit the JP gauge. I believe the JP gauge is supposed to be a better match for the JP chamber so that is the one I go by. I only wish it was made from stainless steel instead of aluminum. I have other JP accessories and they are top notch.
Doesn"t Work!(10.06.2013)
Reloaded rounds went in the gauge nice and easy and came out just as easy, therefore I "assumed" good to go. The rounds wouldn"t chamber properly in my rifle bolt would not close! Upon further review there was a slight bulge (.03)in the case (need t check press) but I feel the gauge was of no value it didn't give me any assurance of good round. In my opinion....JUNK!
most accurate 223/556 gage(12.03.2017)
This is the tightest tolerance gage (yes, this spelling is the correct usage for the tool as a noun) out there for 223/5.56.
Defective cases that passed a Dillon 223 gage did not pass the JP gage. It saved me a lot of frustration if I were to start batch reloading based on faulty results.