Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

SADLAK INDUSTRIES
M14/M1A TACTICAL SCOPE MOUNT

855981008022 100002407

Maximum Support, Superior Strength-To-Weight Ratio

Helps keep the weight down when adding heavy tactical optics to your M14/M1A. Three-point design clamps down solidly, without alteration, to the side receiver ring, charger guide dovetail and receiver mount lug. Precision-cut rail includes 5º angle milled on the underside for easy case ejection without hang-ups; accepts Picatinny and Weaver-style rings. Open sight channel gives unobstructed view of back-up iron sights. Standard model is available in three strength-to-weight combinations. Steel model is fully machined from stress-relieved 4142 chrome-moly steel barstock, hardened to Rc 28-32 for maximum strength. Aluminum model is machined from 7075 bar stock aluminum and hardcoat anodized matte black for durability. Airborne model features a lightweight skeletonized frame with seven, 3/8" diameter CNC machined lightening holes in the top of the rail for reduced weight without sacrificing strength. Machined from chrome-moly steel bar stock and heat-treated to Rc 50 for superior strength. Mil-Spec Parkerized finish resists abrasion and corrosion. Adopted by the 101st Airborne.

SPECS: 5-7⁄16" (13.8cm) long, 2" (5.1cm) wide, 1¾" (4.4cm) high. Includes mounting hardware, Allen wrenches, and complete instructions. Steel - 4142 chrome-moly steel, hardened to Rc 28-32, mil-spec manganese phosphate Parkerized, matte black. 11.8 oz. (334g) wt. Aluminum - 7075 aircraft aluminum bar stock, hard coat anodized, black, matte finish. 7.52 oz. (213g) wt. Airborne - Steel, chrome-moly, Parkerized, black, matte finish. 9.4oz. (266g) wt.

Mer...

Maksimal støtte, overlegen styrke-til-vekt forhold

Hjelper med å holde vekten nede når du legger til tunge taktiske optikker på din M14/M1A. Trepunkts design klemmer seg fast solid, uten endringer, til sidemottaker ringen, ladeguide dovetail og mottaker monteringslug. Presisjonskutt skinne inkluderer en 5º vinkel frest på undersiden for enkel hylseutkastelse uten oppheng; aksepterer Picatinny og Weaver-stil ringer. Åpen siktekanal gir uhindret utsikt over back-up jernsikter. Standardmodellen er tilgjengelig i tre styrke-til-vekt kombinasjoner. Stålmodellen er fullstendig maskinert fra stressavlastet 4142 krom-molybden stål barlager, herdet til Rc 28-32 for maksimal styrke. Aluminiumsmodellen er maskinert fra 7075 bar lager aluminium og hardcoat anodisert matt svart for holdbarhet. Airborne modellen har en lettvekts skjelett ramme med syv, 3/8" diameter CNC maskinerte lettelseshull i toppen av skinnen for redusert vekt uten å ofre styrke. Maskinert fra krom-molybden stål bar lager og varmebehandlet til Rc 50 for overlegen styrke. Mil-Spec Parkerisert finish motstår slitasje og korrosjon. Adoptert av 101st Airborne.

SPECS: 5-7⁄16" (13.8cm) lang, 2" (5.1cm) bred, 1¾" (4.4cm) høy. Inkluderer monteringsutstyr, Allen-nøkler og komplette instruksjoner. Stål - 4142 krom-molybden stål, herdet til Rc 28-32, militær-spesifikasjon manganfosfat Parkerisert, matt svart. 11.8 oz. (334g) vekt. Aluminium - 7075 flyaluminium bar lager, hard anodisert, svart, matt finish. 7.52 oz. (213g) vekt. Airborne - Stål, krom-molybden, Parkerisert, svart, matt finish. 9.4oz. (266g) vekt.

Mer...

Kundevurderinger for SADLAK INDUSTRIES ALUMINUM M14/M1A TACTICAL MOUNT

Antall vurderinger: 15
Fra brownells.com: 15
Gjennomsnittsvurdering: 4,6

Wish I had bought this the first time (20.04.2010)

Perfect fit. Complete step by step instructions.Quality Control personally signed off by Mike Sadlak. Dont find that too often these days.

Sadlak is QUALITY... (22.04.2010)

Sadlak's "Airborne" is of topnotch quality..with a really decent price. No regrets after opening the package and realizing the workmanship that Sadlak puts in to their products. The precise tolerances with mounting it on a Springfield Armory M1A, new production, was mind-blowing. They even go as far as making available(for a nominal fee)a DETAILED 'measuring kit', if the receiver isn't G.I. spec. Would definately purchase it again! NO negatives from me...

Should have bought this first. (27.04.2010)

Excellent piece of machining. Perfect tight fit. Final inspection performed by Mr. Sadlak himself. You do not see that very often these days. Concise step by step instructions with clear diagrams.

Fantastic Scope mount!! (21.09.2010)

HOW WOULD I RATE THIS MOUNT?? ABSULTELY! RANGE AT 300 YDS I CAN COVER IT WITH A SILVER DOLLAR SHOT OFTER SHOT SOLID AND AND EXTREMELY WELL MADE FOR THE M14 BY FULTON ARMORY VERY HIGHLY RECOMMENDED FOR ANY TYPE OF SHOOTER!

WOW!!! (29.10.2011)

I paired this with my Leupold Mark 4 LT/R M5 3.5-10x40mm on a SOCOM 16/M1A. I was getting 1"-1.5" groupings all day long with Winchester SUPER X 150 grain bullets at a 100 yards! This is another great product from Sadlak! WORTH IT'S WEIGHT IN GOLD!!

M14/M1A AIRBORNE SCOPE MOUNT by SADLAK I (04.11.2011)

Excellent instructions. Follow them to the letter and you won't have any trouble. You'll need a set of 6 inch dial calipers to check your receiver to make sure it is within specs. Mine fit like a glove.

Exelant product for a soild company (06.01.2013)

I have used Sadlak parts on many M1a builds and the mounts work! I have a Ti on my own and the Airborne on several others.
The mount sets up and dials in and stays set!
BZ

Great Product (25.05.2010)

Installed it on a Federal receiver. Even though the receiver was way out of spec in several places I was able to get it installed without removing any metal from base or receiver. The ability to see the iron sights through the base helps when mounting the base/scope. I was able to get the base mounted and the scope on the paper first shot by using the iron sights before going to the range.

100% Pleased (25.08.2010)

Easy to install, No problems with the M1A fit.

Very handsome headache...jam, jam, jam (07.11.2010)

Sadlak makes an absolutely exquisite mount, but it caused my M1A jam repeatedly, repeatedly, repeatedly. The case would wedge above the chamber, between the scope mount and the receiver. Although the mount is relieved and angled to facilitate ejection, the relief cut ends about half an inch before the chamber, leaving a narrow "trap" to catch brass. Found a number of similar reports on the internet--supposedly a ejection timing issue--so I swapped in new mil-spec springs on the op rod and ejector, with no difference. Sorry, for [$], there's no excuse to produce a mount that causes jams. Went back to a Springfield 4th gen mount and it works without a hitch.

Best bang for the buck (01.12.2010)

Three years and over 1k down the pipe this Sadlak mount has been great. When I have R&R'd the mount it returns within 3moa.

Sadlak Industries Aluminum M1A Scope Mou (02.04.2015)

I purchased the Sadlak aluminum scope mount for my (1991 vintage) M1A. I am impressed with the quality of the mount, detailed instructions and end result, which is a rock solid scope mount. I fired 30 rds after mounting the scope and had no function issues.

I don't usually write reviews, but was compelled to give this product a five star review. Great product!!

Worked well with my standard (12.09.2016)

Product shipped fast and arrived with all items needed to install. A little tricky to torque the allen screws, but if instructions are followed properly just a little extra snugging on each screw/bolt was right on the money. I had NO ejection issues with 40 rounds fired on my Springfield standard. Installed a Vortex 4-12x44 with weaver rings. I will say that I was about 12 inches low and 10 inches right at 50 yards to start-yikes!!! I did not do the recommended spec sheet from sadlak ahead of time, that would help I'm sure. I think up and down could be adjusted depending on how you install, but right to left cannot. Long story short I had enough adjustment in the scope to zero it. Moved out to 100 yards and fine tuned a bit. Took 20-25 rounds from a sandbag and picnic table without a bore sight laser. Overall happy with it, and the instructions are easy and accurate. I know the steel or titanium would be better, but for me, a light shooter I didn't find it necessary for the extra money. Not enough rounds down range to really know for sure about holding zero and shooting loose, but I think it will be fine. Will further review if anything changes. Sadlak and Brownells were great to deal with as everyone says!

Fit First try, adjustment takes longer. (21.06.2017)

Got the new Tactical Sadlak Mount for M14/M1 Springfields from Brownells. Test Fit and all parts fell in place on 1st try, nothing too loose or too tight. Used Directions and Mount adjustment kit and mine was in specifications. Installed per directions and this was only the difficult spot which was tighten then loosen and tighten again, even per directions made that statement. Next will be range after using Green Boresight laser set for 600 yard Neighbors rafter above window (2" x 6" on red Background) to see if big bore 762 x 51 shakes things loose..

Great mount (23.06.2017)

I ordered this Sadlack Aluminum mount for my 1994 Armscorp Heavy National Match from Brownells last month after another popular mount in the same price range would not lock or stay locked in the left side reciever slot. Before ordering I called Sadlack customer service and was told this mount was designed to adjust for recievers with out of spec recievers including the left side mounting slot (and he was right). I needed this mount because at 61 i can't see good enough to shoot 1 MOA anymore with the NM iron sights. Took around 30-45 minutes to install and using internet videos made it a very easy project. Comes with a small tube of loc tight too. Mount looks great and i really like the high quality fit/finish and the white lettering too. Fired around 100 rounds last week (3 shot groups) and it held a zero using 2 scopes. Mount has a slot under the rail so i can still use my iron sights. I am very pleased with this mount and its a great deal at $124.00.

Les 15 flere anmeldelser fra brownells.com

4099 6399 3 NOK

Produktnr.: 100002407
SADLAK INDUSTRIES ALUMINUM M14/M1A TACTICAL MOUNT
Produsentnr.: 140012 855981008022 Hjelper med å holde vekten nede når du legger til tunge taktiske optikker på din M14/M1A. Trepunkts design klemmer seg fast solid, uten endringer, til sidemottaker ringen, ladeguide dovetail og mottaker monteringslug. Presisjonskutt skinne inkluderer en 5º vinkel frest på undersiden for enkel hylseutkastelse uten oppheng; aksepterer Picatinny og Weaver-stil ringer. Åpen siktekanal gir uhindret utsikt over back-up jernsikter. Standardmodellen er tilgjengelig i tre styrke-til-vekt kombinasjoner. Stålmodellen er fullstendig maskinert fra stressavlastet 4142 krom-molybden stål barlager, herdet til Rc 28-32 for maksimal styrke. Aluminiumsmodellen er maskinert fra 7075 bar lager aluminium og hardcoat anodisert matt svart for holdbarhet. Airborne modellen har en lettvekts skjelett ramme med syv, 3/8" diameter CNC maskinerte lettelseshull i toppen av skinnen for redusert vekt uten å ofre styrke. Maskinert fra krom-molybden stål bar lager og varmebehandlet til Rc 50 for overlegen styrke. Mil-Spec Parkerisert finish motstår slitasje og korrosjon. Adoptert av 101st Airborne.

4099 NOK 6 kr 4 099,00 *

Leveringstid ca. 14-21 dager.
6 stk. på lageret i USA

Spesifikasjoner: Farge: Matte Black Make: Springfield Material: Aluminum Modell: M14, M1A Number of Bases: 1-Piece Style: Tactical Bases

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Tre tilgjengelige modeller: Stål, Aluminium og Airborne, hver med forskjellige styrke-til-vekt kombinasjoner og spesifikasjoner.
Presisjonskutt skinne med 5º vinkel for enkel hylseutkastelse, kompatibel med Picatinny og Weaver-stil ringer.
Inkluderer monteringsutstyr, Allen-nøkler og komplette instruksjoner for enkel installasjon uten endringer på riflen.

Attributes

Farge: Matte Black Make: Springfield Material: Aluminum Modell: M14,M1A Number of Bases: 1-Piece Style: Tactical Bases Leveringsvekt: 0,204kg Frakthøyde: 36mm Fraktbredde: 157mm Fraktlengde: 257mm UPC : 855981008022

Elementdetaljer

Made in USA

Produktnr.: 100005434
SADLAK INDUSTRIES STEEL M14/M1A TACTICAL MOUNT
Produsentnr.: 140011 Hjelper med å holde vekten nede når du legger til tunge taktiske optikker på din M14/M1A. Trepunkts design klemmer seg fast solid, uten endringer, til sidemottaker ringen, ladeguide dovetail og mottaker monteringslug. Presisjonskutt skinne inkluderer en 5º vinkel frest på undersiden for enkel hylseutkastelse uten oppheng; aksepterer Picatinny og Weaver-stil ringer. Åpen siktekanal gir uhindret utsikt over back-up jernsikter. Standardmodellen er tilgjengelig i tre styrke-til-vekt kombinasjoner. Stålmodellen er fullstendig maskinert fra stressavlastet 4142 krom-molybden stål barlager, herdet til Rc 28-32 for maksimal styrke. Aluminiumsmodellen er maskinert fra 7075 bar lager aluminium og hardcoat anodisert matt svart for holdbarhet. Airborne modellen har en lettvekts skjelett ramme med syv, 3/8" diameter CNC maskinerte lettelseshull i toppen av skinnen for redusert vekt uten å ofre styrke. Maskinert fra krom-molybden stål bar lager og varmebehandlet til Rc 50 for overlegen styrke. Mil-Spec Parkerisert finish motstår slitasje og korrosjon. Adoptert av 101st Airborne.

5399 NOK 18 kr 5 399,00 *

Leveringstid ca. 14-21 dager.
Mer enn 10 stk. på lager i USA

Spesifikasjoner: Farge: Matte Black Make: Springfield Material: Steel Modell: M14, M1A Number of Bases: 1-Piece Style: Tactical Bases

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Trekantet design som klemmer seg fast solid til sidemottaker ringen, ladeguide dovetail og mottaker monteringslug uten endringer.
Tilgjengelig i tre materialkombinasjoner: stål (4142 krom-molybden), aluminium (7075 flyaluminium) og Airborne (lettvekts skjelett ramme).
Presisjonskutt skinne med 5º vinkel for enkel hylseutkastelse, kompatibel med Picatinny og Weaver-stil ringer, og åpen siktekanal for uhindret utsikt over jernsikter.

Attributes

Farge: Matte Black Make: Springfield Material: Steel Modell: M14,M1A Number of Bases: 1-Piece Style: Tactical Bases Leveringsvekt: 0,34kg Frakthøyde: 38mm Fraktbredde: 135mm Fraktlengde: 132mm

Elementdetaljer

Made in USA

Produktnr.: 100003841
SADLAK INDUSTRIES AIRBORNE M14/M1A TACTICAL MOUNT
Produsentnr.: 140015 855981008039 Hjelper med å holde vekten nede når du legger til tunge taktiske optikker på din M14/M1A. Trepunkts design klemmer seg fast solid, uten endringer, til sidemottaker ringen, ladeguide dovetail og mottaker monteringslug. Presisjonskutt skinne inkluderer en 5º vinkel frest på undersiden for enkel hylseutkastelse uten oppheng; aksepterer Picatinny og Weaver-stil ringer. Åpen siktekanal gir uhindret utsikt over back-up jernsikter. Standardmodellen er tilgjengelig i tre styrke-til-vekt kombinasjoner. Stålmodellen er fullstendig maskinert fra stressavlastet 4142 krom-molybden stål barlager, herdet til Rc 28-32 for maksimal styrke. Aluminiumsmodellen er maskinert fra 7075 bar lager aluminium og hardcoat anodisert matt svart for holdbarhet. Airborne modellen har en lettvekts skjelett ramme med syv, 3/8" diameter CNC maskinerte lettelseshull i toppen av skinnen for redusert vekt uten å ofre styrke. Maskinert fra krom-molybden stål bar lager og varmebehandlet til Rc 50 for overlegen styrke. Mil-Spec Parkerisert finish motstår slitasje og korrosjon. Adoptert av 101st Airborne.

6399 NOK 0 kr 6 399,00 *

Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

Spesifikasjoner: Farge: Matte Black Make: Springfield Material: Steel Modell: M14, M1A Number of Bases: 1-Piece Style: Picatinny, Weaver

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Trekantet design gir solid feste til M14/M1A uten endringer, og inkluderer en presisjonskutt skinne med 5º vinkel for enkel hylseutkastelse.
Tilgjengelig i tre materialkombinasjoner: stål, aluminium og Airborne-modell med lettvekts skjelettramme, alle med matte svarte finish.
Leveres med monteringsutstyr, Allen-nøkler og instruksjoner; adoptert av 101st Airborne for pålitelighet og holdbarhet.

Attributes

Farge: Matte Black Make: Springfield Material: Steel Modell: M14,M1A Number of Bases: 1-Piece Style: Weaver,Picatinny Leveringsvekt: 0,34kg Frakthøyde: 48mm Fraktbredde: 155mm Fraktlengde: 262mm UPC : 855981008039

Elementdetaljer

Made in USA

Oppgrader din M14/M1A med vår lette og sterke tactical scope mount! 🛠️ Perfekt for tunge optikker og enkel installasjon.

Maximum Support, Superior Strength-To-Weight Ratio

Mer...

Maksimal støtte, overlegen styrke-til-vekt forhold

Mer...

Kundevurderinger for SADLAK INDUSTRIES ALUMINUM M14/M1A TACTICAL MOUNT

Antall vurderinger: 15
Fra brownells.com: 15
Gjennomsnittsvurdering: 4,6

Wish I had bought this the first time (20.04.2010)

Perfect fit. Complete step by step instructions.Quality Control personally signed off by Mike Sadlak. Dont find that too often these days.

Sadlak is QUALITY... (22.04.2010)

Should have bought this first. (27.04.2010)

Excellent piece of machining. Perfect tight fit. Final inspection performed by Mr. Sadlak himself. You do not see that very often these days. Concise step by step instructions with clear diagrams.

Fantastic Scope mount!! (21.09.2010)

WOW!!! (29.10.2011)

M14/M1A AIRBORNE SCOPE MOUNT by SADLAK I (04.11.2011)

Exelant product for a soild company (06.01.2013)

I have used Sadlak parts on many M1a builds and the mounts work! I have a Ti on my own and the Airborne on several others.
The mount sets up and dials in and stays set!
BZ

Great Product (25.05.2010)

100% Pleased (25.08.2010)

Easy to install, No problems with the M1A fit.

Very handsome headache...jam, jam, jam (07.11.2010)

Best bang for the buck (01.12.2010)

Three years and over 1k down the pipe this Sadlak mount has been great. When I have R&R'd the mount it returns within 3moa.

Sadlak Industries Aluminum M1A Scope Mou (02.04.2015)

Worked well with my standard (12.09.2016)

Fit First try, adjustment takes longer. (21.06.2017)

Great mount (23.06.2017)

Les 15 flere anmeldelser fra brownells.com

Anbefalte produkter
Kunder kjøpte også

BROWNELLS

BROWNELLS ALLEN HEAD FIXED-BLADE SCREWDRIVER SET
ALLEN HEAD FIXED-BLADE SCREWDRIVERS

Skrutrekere | Vanlig skrutrekkersett

Kommer til lager

kr 1 549,00 kr 279,00 - kr 1 549,00

BROWNELLS

BROWNELLS SOCKET SCOPE SCREW KIT
SOCKET HEAD SCOPE RING & BASE SCREW KIT

Metallskruer

Kommer til lager

kr 1 449,00 kr 199,00 - kr 1 449,00

Opplev komfort med RIFLE STRAP-ON CHEEK PIECE! 🎯 Denne kinnstøtten gir stabilitet og demping for bedre skyteopplevelser.

SMITH ENTERPRISE

SMITH ENTERPRISE STRAP-ON CHEEK PIECE TAN NYLON
RIFLE STRAP-ON CHEEK PIECE

Kinnstøtte

Ikke tilgjengelig

SADLAK INDUSTRIES
M14/M1A TACTICAL SCOPE MOUNT

Kundevurderinger for SADLAK INDUSTRIES ALUMINUM M14/M1A TACTICAL MOUNT

Top takeaways

Attributes

Elementdetaljer

Top takeaways

Attributes

Elementdetaljer

Top takeaways

Attributes

Elementdetaljer

Kundevurderinger for SADLAK INDUSTRIES ALUMINUM M14/M1A TACTICAL MOUNT

Koble til

Sikre betalingsmåter

Bransjeorganisasjoner

Velkommen!

SADLAK INDUSTRIES M14/M1A TACTICAL SCOPE MOUNT

Kundevurderinger for SADLAK INDUSTRIES ALUMINUM M14/M1A TACTICAL MOUNT

Top takeaways

Attributes

Elementdetaljer

Top takeaways

Attributes

Elementdetaljer

Top takeaways

Attributes

Elementdetaljer

Kundevurderinger for SADLAK INDUSTRIES ALUMINUM M14/M1A TACTICAL MOUNT

Koble til

Sikre betalingsmåter

Bransjeorganisasjoner

Velkommen!

SADLAK INDUSTRIES
M14/M1A TACTICAL SCOPE MOUNT