Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

ULTIMAK
M14/M1A M8 FORWARD OPTIC MOUNT

100002948

No Machining Required; For Fast-Sighting Forward Optics

Lightweight, fully machined 1913 Picatinny-style rail accepts intermediate eye relief scopes, red dot, holographic, and reflex optics. Provides increased aiming speed with optics mounted in the forward position. Low profile allows co-witnessing of the factory sights with tube-bodied, red dot sights. Recoil lug, plus dual clamps attach quickly to standard weight, G.I. spec barrels without modifications; installs in place of the factory handguard. Fits M-14/M1A with original, standard weight barrel profile, original National Match standard profile and most Chinese M1A clones. Will Not fit Springfield Loaded Standard, Match, Tactical, or other medium or heavy profile barrels.

SPECS: Aluminum, hardcoat anodized, black, matte finish. 12-9⁄16" (31.9cm) long. 12.4oz. (352g )wt. Fits M-14/M1A with original, standard weight barrel profile, original National Match standard profile and most Chinese M1A clones. Will Not fit Springfield Loaded Standard, Match, Tactical, or other medium or heavy profile barrels. Includes instructions.

Mer...

Ingen Maskinering Nødvendig; For Rask Sikting med Fremre Optikk

Lett, fullstendig maskinert 1913 Picatinny-stil skinne aksepterer sikter med mellomliggende øyeavstand, rødpunktsikter, holografiske og refleks optikk. Gir økt siktehastighet med optikk montert i fremre posisjon. Lav profil tillater samvisning av fabrikksiktene med rødpunktsikter med tubekropp. Rekyllugger, pluss doble klemmer festes raskt til standardvekt, G.I. spesifikasjonsløp uten modifikasjoner; installeres i stedet for fabrikkens forskjefte. Passer til M-14/M1A med original, standard vekt på løpsprofil, original National Match standardprofil og de fleste kinesiske M1A-kloner. Passer ikke til Springfield Loaded Standard, Match, Tactical, eller andre løpsprofiler med medium eller tung vekt.

SPECS: Aluminium, hardcoat anodisert, svart, matt finish. 12-9⁄16" (31.9cm) lang. 12.4oz. (352g) vekt. Passer til M-14/M1A med original, standard vekt på løpsprofil, original National Match standardprofil og de fleste kinesiske M1A-kloner. Passer ikke til Springfield Loaded Standard, Match, Tactical, eller andre løpsprofiler med medium eller tung vekt. Inkluderer instruksjoner.

Mer...

Kundevurderinger for ULTIMAK FORWARD OPTIC MOUNT

Antall vurderinger: 5
Fra brownells.com: 5
Gjennomsnittsvurdering: 4,4

Invaluable tool for the M1A/M14 (30.12.2009)

This rail was recommended to me for replacement of the Springfield Armory scope mount. I have had this rail on for over a year with my Eotech 512. I doesn't get any better than this and I shoot alot, and hunt with it. I have recommended to my friends and they are extremely happy with this optic mount also. Easy to install,extremely hardy and heavy duty...and I would buy this product again.

Great mount! (11.08.2010)

Great add-on to my M1A Scout! Installation was very easy and the directions are very clear and the color photos make putting it on a breeze. I highly recommend it.

Does not fit NM (14.03.2012)

The description says it will fit National Match M1As, but that is not correct at all. The heavy barrel extends far too long to even come close to fitting within this handguard.

A+ for this mount! (06.05.2012)

This is a well made, solid mount. It fits The USGI barrel I have perfectly. The outside contour blends well with the rest of the rifle resulting in an integrated look. The mount itself is about an inch and a half lower than most other traditional scope mounts making it a good choice for optic sights like Eotech.
Mounting the mount will take you a better part of an hour if not longer depending on how mechanically inclined you are. The instructions are concise but a little difficult to follow but if you read them carefully and take your time you should have no problem.
I was pleasantly surprised to find that the rifle shot better with the mount attached which came as a pleasant surprise as I was worried clamping something to the barrel would have an adverse effect.
Overall well worth the high price.

Sturdy and strong for optics. (04.10.2013)

Pros: built well and installation was easy. I did tighten a screw too tight and had to back it out. It was too stripped to put back in, called Ultimak, they sent me a complete set of screws just in case, no charge. Great customer service!

Cons: I installed this rail and installed a nikon force eer pistol scope. This rail will slightly taper towards the muzzle and will slightly dip, hard to tell with the human eye. After sighting my scope in with this rail and gun, my scope could not adjust to the 100yard sight in, it was about 15 MOA above the crosshairs and my scope could no longer adjust it was maxed out on elevation. Had to buy scope shim kit to move h scope up 15 MOA.

Other than the taper, well built rail ideal for red dots.

Les 5 flere anmeldelser fra brownells.com

4699 4699 1 NOK

Produktnr.: 100002948
ULTIMAK FORWARD OPTIC MOUNT
Produsentnr.: M8 Lett, fullstendig maskinert 1913 Picatinny-stil skinne aksepterer sikter med mellomliggende øyeavstand, rødpunktsikter, holografiske og refleks optikk. Gir økt siktehastighet med optikk montert i fremre posisjon. Lav profil tillater samvisning av fabrikksiktene med rødpunktsikter med tubekropp. Rekyllugger, pluss doble klemmer festes raskt til standardvekt, G.I. spesifikasjonsløp uten modifikasjoner; installeres i stedet for fabrikkens forskjefte. Passer til M-14/M1A med original, standard vekt på løpsprofil, original National Match standardprofil og de fleste kinesiske M1A-kloner. Passer ikke til Springfield Loaded Standard, Match, Tactical, eller andre løpsprofiler med medium eller tung vekt.

4699 NOK 0 kr 4 699,00 *

Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

Spesifikasjoner: Farge: Matte Black Make: Springfield Material: Aluminum Modell: M14, M1A Number of Bases: 1-Piece Style: Tactical Bases

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Lett, maskinert 1913 Picatinny-stil skinne aksepterer ulike typer optikk og gir økt siktehastighet med fremre montering.
Lav profil tillater samvisning av fabrikksiktene med rødpunktsikter med tubekropp.
Passer til M-14/M1A med original, standard vekt på løpsprofil, original National Match standardprofil og de fleste kinesiske M1A-kloner, men ikke til Springfield Loaded Standard, Match, Tactical, eller andre medium eller tungvektsløpsprofiler.

Attributes

Farge: Matte Black Make: Springfield Material: Aluminum Modell: M14,M1A Number of Bases: 1-Piece Style: Tactical Bases Leveringsvekt: 0,499kg Frakthøyde: 97mm Fraktbredde: 102mm Fraktlengde: 361mm

Elementdetaljer

Made in USA

Oppgrader ditt M14/M1A med ULTIMAK M8 Forward Optic Mount! 🚀 Gir raskere siktehastighet og perfekt passform for din rifle.

No Machining Required; For Fast-Sighting Forward Optics

Mer...

Ingen Maskinering Nødvendig; For Rask Sikting med Fremre Optikk

Mer...

Kundevurderinger for ULTIMAK FORWARD OPTIC MOUNT

Antall vurderinger: 5
Fra brownells.com: 5
Gjennomsnittsvurdering: 4,4

Invaluable tool for the M1A/M14 (30.12.2009)

Great mount! (11.08.2010)

Great add-on to my M1A Scout! Installation was very easy and the directions are very clear and the color photos make putting it on a breeze. I highly recommend it.

Does not fit NM (14.03.2012)

The description says it will fit National Match M1As, but that is not correct at all. The heavy barrel extends far too long to even come close to fitting within this handguard.

A+ for this mount! (06.05.2012)