Lyman’s tray-fed E-ZEE Prime Hand Priming Tool allows you to seat primers the way a lot of reloaders still prefer to do it: by hand. The two included trays – for large and small primers – feature integrated shut-off gates to prevent primer spillage, and let you flip the primers to orient them correctly for seating. An ergonomically shaped handle prevents hand fatigue and gives you plenty of leverage to seat primers, while still providing the “feel” you need to confirm complete seating. Accepts standard shellholders from Lyman and the other popular makers.
Mer...
Lymans brett-fôrede E-ZEE Prime Hand Priming Tool lar deg sette tennhetter på den måten mange omladere fortsatt foretrekker å gjøre det: for hånd. De to inkluderte brettene – for store og små tennhetter – har integrerte avstengningsporter for å forhindre søl av tennhetter, og lar deg vende tennhetter for å orientere dem korrekt for innsetting. Et ergonomisk formet håndtak forhindrer tretthet i hånden og gir deg god hevarm for å sette tennhetter, samtidig som det gir deg den "følelsen" du trenger for å bekrefte fullstendig innsetting. Aksepterer standard hylseholdere fra Lyman og andre populære produsenter.
Mer...
Kundevurderinger for LYMAN E-ZEE PRIME HAND PRIMING TOOL
Antall vurderinger: 3
Fra brownells.com: 2
Gjennomsnittsvurdering: 2
Overhodet ikke verdt pengene(21.01.2020)
Denne seater ikke tennhettene skikkelig slik at de blir jevne med bunnen på hylsa. Jeg må sette dem skikkelig etterpå på ladepressa. Håpløst opplegg.
Easy peasy priming tool(07.06.2014)
Since my very old Lee hand priming tools were starting to break parts beyond my capability to replace them, I looked for a replacement tool. Finally settled on the Lyman E-Zee Prime.
I immediately liked the sturdy feel of the new tool, and the ease of changing from large to small head assemblies. Also, being able to use any make shell holder is an advantage.
Having read the instructions and set-up the tool, I began priming with the large primer set-up for 7.62x39. After ascertaining that the large set-up worked fine, I switched to small primers (9mm) where the proper hand positioning and rythm of tool use is more critical. Follow the instructions regarding proper positioning of hand and tool and all will be well.
In summary I like the new tool, and find it works well if used in accordance with instructions. Once you get in the groove it operates smoothly. You can get a primer sideways if you lose your groove particularly with small primers.
Disappointed in Lyman(16.04.2017)
I load hand gun rounds by the hundred. I like to use the handheld style priming tools. My old Lee has hundreds of thousand of rounds through it and is 37 years old. I wanted to try something new and I have Lyman press and several sets of Lyman dies so the new tool looked good. It isn't. There is a real issue with flipping primers between the tray and the ram. Even with care it's easy to lose 1-2 primers per 100. Mine has the lid LYMAN lettering painted in heavy orange paint making it hard to see into the tray to track flipped primers. Also there is no hole in lid to replace stray primers and you will have stray primers as you fix the flipped ones. You must make sure that you make a full stroke with handle every time or it will fail to pick up the next primer. The reach on the handle is pretty wide even for my big hands. (I wear 2X shooting gloves). So it takes two hands to work it to avoid dropping it. This all boils down to SLOW. It works a little better with large primers but it's a pain with small pistol primers. It does seat the primers well and if you are loading 20 rifles rounds it might be ok. But when your looking to load 1000 .357s it doesn't get it . I think I'll just get a fresh new Lee...that should get me by for the next 30 years.
Produktnr.: 749101805 LYMAN E-ZEE PRIME HAND PRIMING TOOL Produsentnr.: 7777810011516578105 Lymans brett-fôrede E-ZEE Prime Hand Priming Tool lar deg sette tennhetter på den måten mange omladere fortsatt foretrekker å gjøre det: for hånd. De to inkluderte brettene – for store og små tennhetter – har integrerte avstengningsporter for å forhindre søl av tennhetter, og lar deg vende tennhetter for å orientere dem korrekt for innsetting. Et ergonomisk formet håndtak forhindrer tretthet i hånden og gir deg god hevarm for å sette tennhetter, samtidig som det gir deg den "følelsen" du trenger for å bekrefte fullstendig innsetting. Aksepterer standard hylseholdere fra Lyman og andre populære produsenter.
1049NOK0kr 1 049,00
*
Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.
Lyman’s tray-fed E-ZEE Prime Hand Priming Tool allows you to seat primers the way a lot of reloaders still prefer to do it: by hand. The two included trays – for large and small primers – feature integrated shut-off gates to prevent primer spillage, and let you flip the primers to orient them correctly for seating. An ergonomically shaped handle prevents hand fatigue and gives you plenty of leverage to seat primers, while still providing the “feel” you need to confirm complete seating. Accepts standard shellholders from Lyman and the other popular makers.
Mer...
Lymans brett-fôrede E-ZEE Prime Hand Priming Tool lar deg sette tennhetter på den måten mange omladere fortsatt foretrekker å gjøre det: for hånd. De to inkluderte brettene – for store og små tennhetter – har integrerte avstengningsporter for å forhindre søl av tennhetter, og lar deg vende tennhetter for å orientere dem korrekt for innsetting. Et ergonomisk formet håndtak forhindrer tretthet i hånden og gir deg god hevarm for å sette tennhetter, samtidig som det gir deg den "følelsen" du trenger for å bekrefte fullstendig innsetting. Aksepterer standard hylseholdere fra Lyman og andre populære produsenter.
Mer...
Kundevurderinger for LYMAN E-ZEE PRIME HAND PRIMING TOOL
Antall vurderinger: 3
Fra brownells.com: 2
Gjennomsnittsvurdering: 2
Overhodet ikke verdt pengene(21.01.2020)
Denne seater ikke tennhettene skikkelig slik at de blir jevne med bunnen på hylsa. Jeg må sette dem skikkelig etterpå på ladepressa. Håpløst opplegg.
Easy peasy priming tool(07.06.2014)
Since my very old Lee hand priming tools were starting to break parts beyond my capability to replace them, I looked for a replacement tool. Finally settled on the Lyman E-Zee Prime.
I immediately liked the sturdy feel of the new tool, and the ease of changing from large to small head assemblies. Also, being able to use any make shell holder is an advantage.
Having read the instructions and set-up the tool, I began priming with the large primer set-up for 7.62x39. After ascertaining that the large set-up worked fine, I switched to small primers (9mm) where the proper hand positioning and rythm of tool use is more critical. Follow the instructions regarding proper positioning of hand and tool and all will be well.
In summary I like the new tool, and find it works well if used in accordance with instructions. Once you get in the groove it operates smoothly. You can get a primer sideways if you lose your groove particularly with small primers.
Disappointed in Lyman(16.04.2017)
I load hand gun rounds by the hundred. I like to use the handheld style priming tools. My old Lee has hundreds of thousand of rounds through it and is 37 years old. I wanted to try something new and I have Lyman press and several sets of Lyman dies so the new tool looked good. It isn't. There is a real issue with flipping primers between the tray and the ram. Even with care it's easy to lose 1-2 primers per 100. Mine has the lid LYMAN lettering painted in heavy orange paint making it hard to see into the tray to track flipped primers. Also there is no hole in lid to replace stray primers and you will have stray primers as you fix the flipped ones. You must make sure that you make a full stroke with handle every time or it will fail to pick up the next primer. The reach on the handle is pretty wide even for my big hands. (I wear 2X shooting gloves). So it takes two hands to work it to avoid dropping it. This all boils down to SLOW. It works a little better with large primers but it's a pain with small pistol primers. It does seat the primers well and if you are loading 20 rifles rounds it might be ok. But when your looking to load 1000 .357s it doesn't get it . I think I'll just get a fresh new Lee...that should get me by for the next 30 years.