Din handlekurv er tom.

Handlekurv

Hjelp og kontakt

Gratis frakt over kr 3000

100-dagers returrett

Nyhetsbrev

Salg

Over 300 000 kunder - vi takker dere!

4,93/5 "Veldig bra" (1400+ anmeldelser)

40 000+ produkter for jakt og skytesport

XS SIGHT SYSTEMS
LEVER ACTION LEVER SCOUT MOUNT

647533042482 006000020

Mounts Scope Over Barrel For Fast Sighting

Lightweight, Weaver-style mount positions an extended eye relief scope forward of the receiver for quick, both-eyes-open sighting. Weaver-style base features multiple cross slots for attaching a wide range of electronic and optical sights. Mounts to existing holes and rear sight dovetail. Sets low to allow use of iron sights without removing mount. Requires no modifications to rifle. Marlin models available for 1895 Guide Gun, 1894 and 336 rifles. Winchester fits Model 94’s with rear sight dovetail 4" forward of receiver. a

SPECS: Aluminum, black, matte finish. 8" (20.3cm) long. Includes instructions, plastic punch, hex wrench and Loctite. Winchester also includes bedding compound.

Mer...

Monterer sikte over løpet for rask sikting

Lettvekts, Weaver-stil montering posisjonerer et skop med forlenget øyeavstand foran mottakeren for rask sikting med begge øyne åpne. Weaver-stil base har flere krysspor for å feste et bredt spekter av elektroniske og optiske sikter. Monteres til eksisterende hull og bakre siktedovetail. Setter lavt for å tillate bruk av jernsikter uten å fjerne monteringen. Krever ingen modifikasjoner til riflen. Marlin modeller tilgjengelig for 1895 Guide Gun, 1894 og 336 rifler. Winchester passer Model 94’s med bakre siktedovetail 4" foran mottakeren. a

SPECS: Aluminium, svart, matt finish. 8" (20.3 cm) lang. Inkluderer instruksjoner, plastikkpunch, unbrakonøkkel og Loctite. Winchester inkluderer også bedding compound.

Mer...

Kundevurderinger for XS SIGHT SYSTEMS MARLIN 1895 SCOUT MOUNT

Antall vurderinger: 12
Fra brownells.com: 10
Gjennomsnittsvurdering: 3,3

Fantastic product...once you grind to fit. (15.02.2021)

I bought this scout rail for mye brand new $1800 Marlin 1894 CST (Norway) 'cause I'm going to run a Vortex Crossfire reddot for small game hunting. Imagine the look on my face when I try it on my brand new rifle and the reciever-part is hovering close to half an inch over the holes. This is just beyond me - a $150 rail made by the same company that makes factory sights for all Marlin rifles, and it's THAT much of. So, I contacted XS and Brownells. First of which first did not answer, but in time I got a hold of the guy in charge. They couldn't help me due to ITAR restrictions, and told me to eighther grind to fit (?!) or send it back on my expence through Brownells...I mean, we're looking at months and months. They also told me, strangely enough, that this kind of thing happens from time to time when a "new" model comes along. As far as I know, the CST is a standard, modernized 1894 with a couple of tweaks and goodies. It's also sold out everywhere, so one might expect someone somewhere actually tried the product on the rifles they sell them for.

So, here I am, grinding with a file on my third or fourth night, trying not to damage my very expensive rifle or the rail I've so far removed several mill's from. It's probably a good rail, but do yourself a favor and spend your money on the long one, at least when it comes to the CST. That's gonna fit anyway, AND you're gonna be able to run a scope as well. Now I'm out of beer as well.

Fantastic product...once you grind to fit. (14.02.2021)

Deceptive product description (10.08.2013)

This mount will not fit a pre-64 M94. The description only says the rear sight dovetail must be 4" from the receiver. That's where the old M94 dovetail is, but the description doesn't mention the rear of the mount is attached to the receiver ring with screws. Only newer AE models have a factory drillled & tapped receiver ring. Also, the mount is designed to be permanently attached to the barrel with epoxy. There is no mention of thiis in the description. This is definetly not suitable for a collectible M94. The description should indicate the oinstallation is permanent and requires threaded mopunting holes in the receiver ring.

Scout Mounts are Great (05.12.2009)

I have mounted these on rifles for use of scopes and red dot sights. The ease of use and balance to the weapon makes it very fast, handy, and accurate.

Weaver spec recoil grooves :( (02.01.2012)

Well built rail, that is easy to install. Be aware that the recoil grooves are weaver spec and quick detach mounts that are picatinny spec will not work (i.e. ADM T1-L).

To many variables, cause poor fitting (19.03.2014)

No one tells you how many variables need to be perfect for this to work. I hade to remove with a dremel over a 16th of metal from the barrel mount hole. After all that fitting and installation the hole mount was canted to the left with nothing that could be done to correct it

Mounted on Marlin 336BL (08.03.2016)

I put the scope mount on my Marlin 336BL. Yes, as other reviews state, it does require a degree of fitting. It even says that may be required in the instructions. In any event, I was able to mate the pillar block and the mount to the receiver in about 30-40 minutes. After that, the rest was simple to install with the supplied hardware. Looks good and is very solid at this point. In my opinion, I would rather fit the mount than it be oversize or out of spec in some other way to ensure it fits a variety of different guns without alteration...kind of like having it custom fit for my gun.

I would buy this product again and again (23.04.2010)

Simply perfect.

XS Scout Mount Marlin 1894 44 Mag. S/S (29.07.2011)

This mount is a Very GOOD" set up for this type rifle . The back of the Scope mount`s far enough forward so you can operate the hammer without the scope over the top of the hammer. The scope is far enough forward , where it won`t bust your eye from muzzel blast. it mount`s your scope Very low close to the barrel where it should be on this rifle. Mine is set up with a 2X7X28 MM scope , an Exlent Set Up on this 44 mag rifle for 100 too 200 yd. uses . The Con`s "... I Had to do a LOT" of grinding on the bottom of the mount with a Dremal tool to get the mount to fit right without Flexing when you tork the dang thing down , but FINELY" got it to fix Great" after about 3 hour`s work on it. That part NOT" , fun , but beside`s the extra work on the mount it`s self , it`s a Beautiful set up on the little 44 rifle and work`s Extreamley well with my scope set up. I Still give it 5 stars . My gun shoot`s Pretty Small Groups at 100 yds. now and 5 inch groups at 200 yds. I Love The XS Mount system on this rifle , It IS" , One Fine Set Up On the Rifle !

Excellent overall (14.06.2015)

Comes with everything you'll need and then some. They include a hard plastic punch for removing the dovetail sight. Mine came out with only a few light taps. They also include about 10x more threadlock than you actually need, and more is most always better. Mounting process is very simple and good instructions are included. Installation took all of ~10 minutes for me with only a light sanding of the bottom of the pillar block to fit in the dovetail slot. Now the 1 star off things are small, but somewhat relevant. The etched lettering on the side is fairly blurry, and I don't like that they smacked the patent number right on the side and still blurry. Also, the bolts don't line up with each other at all when torqued. Again that's small and insignificant overall, but I feel it would look much better if the flat head slots lined up. Besides that it is completely solid, and very easy to install.

Warning! (15.06.2010)

Warning! Will not fit octagon barreled cowboy guns. This should be made known in advance but it is not. Otherwise they work good but are made of soft aluminum and marr up real easy.

What a let down.. (06.11.2014)

Received the scout mount for my brand new Marlin 1895G 45-70 and found the rail section to be of such poor quality and lightweight construction that it was curved along its length with a slight warp. The scope sits angled on the mount, regardless of the adjustments made at the dovetail left and right. XS has really dropped the ball with their QC process. Additionally, the screws and dovetail bolt are cheap aluminum that you'll be lucky to mount without damaging. I would have paid quite a bit more for a quality mount instead of this cheap piece of junk.

Les 10 flere anmeldelser fra brownells.com

1699 1699 4 NOK

Produktnr.: 006000020
XS SIGHT SYSTEMS MARLIN 1895 SCOUT MOUNT
Produsentnr.: ML-6000R-N 647533042482 Lettvekts, Weaver-stil montering posisjonerer et skop med forlenget øyeavstand foran mottakeren for rask sikting med begge øyne åpne. Weaver-stil base har flere krysspor for å feste et bredt spekter av elektroniske og optiske sikter. Monteres til eksisterende hull og bakre siktedovetail. Setter lavt for å tillate bruk av jernsikter uten å fjerne monteringen. Krever ingen modifikasjoner til riflen. Marlin modeller tilgjengelig for 1895 Guide Gun, 1894 og 336 rifler. Winchester passer Model 94’s med bakre siktedovetail 4" foran mottakeren. a

Varsle ved tilgjengelighet

Ikke tilgjengelig.

Spesifikasjoner: Farge: Matte Black Make: Marlin Material: Aluminum Modell: 1895 Number of Bases: 1-Piece Style: Weaver

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Top takeaways

Lettvekts, Weaver-stil feste som posisjonerer et kikkertsikte med lang øyeavstand foran mottakeren for rask, begge-øyne-åpne sikting.
Monteres til eksisterende hull og bakre sikteskinne uten behov for modifikasjoner til riflen.
Passer til Marlin 1895 Guide Gun, 1894 og 336 rifler, samt Winchester Model 94 med bakre sikteskinne 4" foran mottakeren.

Attributes

Farge: Matte Black Make: Marlin Material: Aluminum Modell: 1895 Number of Bases: 1-Piece Style: Weaver Leveringsvekt: 0,113kg Frakthøyde: 30mm Fraktbredde: 130mm Fraktlengde: 239mm UPC : 647533042482

Elementdetaljer

Made in USA

Produktnr.: 006000035
XS SIGHT SYSTEMS WINCHESTER 94 SCOUT MOUNT
Produsentnr.: WI-6000R-N 647533042512 Lettvekts, Weaver-stil montering posisjonerer et skop med forlenget øyeavstand foran mottakeren for rask sikting med begge øyne åpne. Weaver-stil base har flere krysspor for å feste et bredt spekter av elektroniske og optiske sikter. Monteres til eksisterende hull og bakre siktedovetail. Setter lavt for å tillate bruk av jernsikter uten å fjerne monteringen. Krever ingen modifikasjoner til riflen. Marlin modeller tilgjengelig for 1895 Guide Gun, 1894 og 336 rifler. Winchester passer Model 94’s med bakre siktedovetail 4" foran mottakeren. a

1699 NOK 0 kr 1 699,00 *

Restordre. Sendes når kommer til lager. Leveringstid ca 4-12 uker fra USA lager.

Spesifikasjoner: Farge: Matte Black Make: Winchester Material: Aluminum Modell: 94 Number of Bases: 1-Piece Style: Weaver

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Produktnr.: 006000031
XS SIGHT SYSTEMS MARLIN 1894 SCOUT MOUNT
Produsentnr.: ML-6002R-N 647533042505 Lettvekts, Weaver-stil montering posisjonerer et skop med forlenget øyeavstand foran mottakeren for rask sikting med begge øyne åpne. Weaver-stil base har flere krysspor for å feste et bredt spekter av elektroniske og optiske sikter. Monteres til eksisterende hull og bakre siktedovetail. Setter lavt for å tillate bruk av jernsikter uten å fjerne monteringen. Krever ingen modifikasjoner til riflen. Marlin modeller tilgjengelig for 1895 Guide Gun, 1894 og 336 rifler. Winchester passer Model 94’s med bakre siktedovetail 4" foran mottakeren. a

Varsle ved tilgjengelighet

Ikke tilgjengelig.

Spesifikasjoner: Farge: Matte Black Make: Marlin Material: Aluminum Modell: 1894 Number of Bases: 1-Piece Style: Weaver

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Produktnr.: 006000032
XS SIGHT SYSTEMS MARLIN 336 SCOUT MOUNT
Produsentnr.: ML-6001R-N 647533042499 Lettvekts, Weaver-stil montering posisjonerer et skop med forlenget øyeavstand foran mottakeren for rask sikting med begge øyne åpne. Weaver-stil base har flere krysspor for å feste et bredt spekter av elektroniske og optiske sikter. Monteres til eksisterende hull og bakre siktedovetail. Setter lavt for å tillate bruk av jernsikter uten å fjerne monteringen. Krever ingen modifikasjoner til riflen. Marlin modeller tilgjengelig for 1895 Guide Gun, 1894 og 336 rifler. Winchester passer Model 94’s med bakre siktedovetail 4" foran mottakeren. a

Varsle ved tilgjengelighet

Ikke tilgjengelig.

Spesifikasjoner: Farge: Matte Black Make: Marlin Material: Aluminum Modell: 336 Number of Bases: 1-Piece Style: Weaver

Legg til ønskeliste

Still spørsmål

Detaljer

Legg til ønskeliste

Still spørsmål

Oppdag LEVER ACTION LEVER SCOUT MOUNT for Marlin 1895! 🎯 Lettvektsdesign og enkel montering for optimal sikting med begge øyne åpne.

Mounts Scope Over Barrel For Fast Sighting

SPECS: Aluminum, black, matte finish. 8" (20.3cm) long. Includes instructions, plastic punch, hex wrench and Loctite. Winchester also includes bedding compound.

Mer...

Monterer sikte over løpet for rask sikting

SPECS: Aluminium, svart, matt finish. 8" (20.3 cm) lang. Inkluderer instruksjoner, plastikkpunch, unbrakonøkkel og Loctite. Winchester inkluderer også bedding compound.

Mer...

Kundevurderinger for XS SIGHT SYSTEMS MARLIN 1895 SCOUT MOUNT

Antall vurderinger: 12
Fra brownells.com: 10
Gjennomsnittsvurdering: 3,3

Fantastic product...once you grind to fit. (15.02.2021)

Fantastic product...once you grind to fit. (14.02.2021)

Deceptive product description (10.08.2013)

Scout Mounts are Great (05.12.2009)

I have mounted these on rifles for use of scopes and red dot sights. The ease of use and balance to the weapon makes it very fast, handy, and accurate.

Weaver spec recoil grooves :( (02.01.2012)

Well built rail, that is easy to install. Be aware that the recoil grooves are weaver spec and quick detach mounts that are picatinny spec will not work (i.e. ADM T1-L).

To many variables, cause poor fitting (19.03.2014)

Mounted on Marlin 336BL (08.03.2016)

I would buy this product again and again (23.04.2010)

Simply perfect.

XS Scout Mount Marlin 1894 44 Mag. S/S (29.07.2011)

Excellent overall (14.06.2015)

Warning! (15.06.2010)

Warning! Will not fit octagon barreled cowboy guns. This should be made known in advance but it is not. Otherwise they work good but are made of soft aluminum and marr up real easy.

What a let down.. (06.11.2014)

Les 10 flere anmeldelser fra brownells.com